[Fri May 17 01:18:54 2013] Detection parameters:
  Position = (315.9, 386.4) = 5 36 21.12 -6 17 18.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.0 +/- 10.8
  Background counts = 34.5
  Rate = 0.002 +/- 0.0004

[Fri May 17 01:18:57 2013] Off-axis axis estimate = 6.50'
[Fri May 17 09:45:18 2013] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting
[Fri May 17 09:45:18 2013] Initial guess for spatial extent in simple fitting = 9.68"
[Fri May 17 09:45:18 2013] source mask rpix=2.2, npix_max = 29, mask sum = 15, frac = 0.505
[Fri May 17 09:45:18 2013] Giving source the simple spatial ID 60 for pass 0, mean size = 9.68"
[Fri May 17 12:36:14 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src60.ximg exists
[Fri May 17 12:36:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src60.csv
[Fri May 17 12:36:14 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src60_1.ximg exists
[Fri May 17 12:36:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src60.csv
[Fri May 17 12:36:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:36:15 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Fri May 17 12:36:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src60.csv
[Fri May 17 12:36:15 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Fri May 17 12:36:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src60.csv
[Fri May 17 12:36:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:37:16 2013] Source 29 is offset by 4.590203 and -6.862250 pixels which is larger than
2 X fitted extent = 1.095251 x 1.095251, not incorporating fit results
[Fri May 17 12:37:16 2013] Warning, spatial fit 60 centroid is now closest to src. 3
[Fri May 17 12:37:17 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:37:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:37:17 2013] Assessing source extent using major
[Fri May 17 12:37:17 2013] Source does appear to be extended
[Fri May 17 12:37:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 18:28:33 2013] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting
[Fri May 17 18:28:33 2013] Initial guess for spatial extent in simple fitting = 9.68"
[Fri May 17 18:28:33 2013] source mask rpix=2.2, npix_max = 29, mask sum = 15, frac = 0.505
[Fri May 17 18:28:33 2013] Giving source the simple spatial ID 60 for pass 1, mean size = 9.68"
[Fri May 17 21:10:36 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src60.ximg exists
[Fri May 17 21:10:36 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src60_1.ximg exists
[Fri May 17 21:10:36 2013] Fit fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src60 appears to have run properly
[Fri May 17 21:10:37 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Fri May 17 21:10:37 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Fri May 17 21:10:37 2013] Fit fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src60 appears to have run properly
[Fri May 17 21:11:22 2013] Source 29 is offset by 4.590203 and -6.862250 pixels which is larger than
2 X fitted extent = 1.095251 x 1.095251, not incorporating fit results
[Fri May 17 21:11:22 2013] Source 29 is offset by 1.124150 and -0.735411 pixels which is larger than
2 X fitted extent = 1.113651 x 1.113651, not incorporating fit results
[Fri May 17 21:11:22 2013] Vigneting correction estimate = 1.000000
[Fri May 17 21:11:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 21:11:22 2013] Assessing source extent using major
[Fri May 17 21:11:22 2013] Source does appear to be extended
[Fri May 17 21:11:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 02:52:23 2013] XMMSAS src. selection expression = ellipse(27430.641693, 33568.278229, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 18 02:52:23 2013] Writing source region out to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src29_src.reg
[Sat May 18 02:52:23 2013] Extracting stamp from image fullrun_mos2_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (278, 349) - (353, 424)
[Sat May 18 02:52:23 2013] XMMSAS bgd. selection expression = annulus(27430.641693, 33568.278229, 1087.500000, 2175.000000, X, Y) && !ellipse(26304.633148, 33345.574371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29442.134000, 33272.104000, 814.760023, 283.534408, 350.169190, X, Y) && !ellipse(28651.992340, 33430.689301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26821.681519, 30848.861816, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 18 02:52:23 2013] Writing fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src29.gif
[Sat May 18 03:34:42 2013] Mean detx,y = (-231.15, 5926.40) 
[Sat May 18 03:34:44 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 03:35:04 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 03:35:04 2013] Setting source spectrum file to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat May 18 03:35:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat May 18 05:37:01 2013] Not generating rmf since there are only 58 counts
[Sat May 18 05:37:01 2013] rmf not generated due to insufficient counts
[Sat May 18 05:47:31 2013] Updating aperture counts using extracted products
[Sat May 18 05:47:31 2013] Total counts from fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 231.00
[Sat May 18 05:47:31 2013] Total counts from fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src29_bgd.pi.gz = 826.00
[Sat May 18 05:47:31 2013] Got source and background scale factors 967602.000000, 6631714.000000
[Sat May 18 05:47:31 2013] User source parameters:
  Position = (315.9, 386.4) = 5 36 21.12 -6 17 18.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 110.5 +/- 16.2
  Background aperture counts = 120.5
  Rate = 0.002 +/- 0.0003

[Sat May 18 05:47:31 2013] Updating counts from extracted products
[Sat May 18 05:47:31 2013] Set source signif. to 110.48/10.98 = 10.06
[Sat May 18 05:47:40 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 05:47:40 2013] Using photon index=1.80, rate=0.00232, arf fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src29.arf
[Sat May 18 05:47:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 05:47:40 2013] Updating source flux to 5.2e-14
[Sat May 18 05:48:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 18 05:48:49 2013] xmm0089940301/analysis//spectral/fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete