[Fri May 17 01:18:54 2013] Detection parameters:
  Position = (356.7, 388.5) = 5 36 9.21 -6 17 11.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.3 +/- 15.4
  Background counts = 29.3
  Rate = 0.005 +/- 0.0005

[Fri May 17 01:18:57 2013] Off-axis axis estimate = 7.78'
[Fri May 17 09:45:18 2013] Using EEF radius (= 10.32 ")to estimate initial spatial extent for simple fitting
[Fri May 17 09:45:18 2013] Initial guess for spatial extent in simple fitting = 10.32"
[Fri May 17 09:45:18 2013] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.909
[Fri May 17 09:45:18 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 10.32"
[Fri May 17 12:36:14 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src38.ximg exists
[Fri May 17 12:36:14 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src38_1.ximg exists
[Fri May 17 12:36:14 2013] Fit fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src38 appears to have run properly
[Fri May 17 12:36:15 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Fri May 17 12:36:15 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Fri May 17 12:36:15 2013] Fit fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Fri May 17 12:37:16 2013] Spatial fit model total counts = 282.757000, observed total counts = 266.000000
[Fri May 17 12:37:16 2013] Offset between fit and detection position for source 28 = 0.121234 pixels
[Fri May 17 12:37:16 2013] 277.516400 total counts/ 189.824000 bgd. counts: snr = 6.364824
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.121234 pixels
  Position = (356.8, 388.5) = 5 36 9.18 -6 17 12.7
  Extent = 6.0 (4.7-8.0)" x 3.5 (2.8-4.5)", rotation angle = 30 (11-51) degrees
  Source counts = 87.7 +/- 16.7
  Background counts = 189.8
  Rate = 0.002 +/- 0.0003
[Fri May 17 12:37:17 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:37:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:37:17 2013] Assessing source extent using major axis lower bound
[Fri May 17 12:37:17 2013] Source does appear to be extended
[Fri May 17 12:37:17 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.03
[Fri May 17 18:28:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 17 18:28:33 2013] Initial guess for spatial extent in simple fitting = 4.76"
[Fri May 17 18:28:33 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.886
[Fri May 17 18:28:33 2013] Giving source the simple spatial ID 38 for pass 1, mean size = 4.76"
[Fri May 17 21:10:36 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src38.ximg exists
[Fri May 17 21:10:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src38.csv
[Fri May 17 21:10:36 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src38_1.ximg exists
[Fri May 17 21:10:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src38.csv
[Fri May 17 21:10:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 21:10:37 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Fri May 17 21:10:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src38.csv
[Fri May 17 21:10:37 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Fri May 17 21:10:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src38.csv
[Fri May 17 21:10:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 21:11:22 2013] Warning, spatial fit 38 centroid is now closest to src. 30
[Fri May 17 21:11:22 2013] Vigneting correction estimate = 1.000000
[Fri May 17 21:11:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 21:11:22 2013] Assessing source extent using major axis lower bound
[Fri May 17 21:11:22 2013] Source does appear to be extended
[Fri May 17 21:11:22 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.03
[Sat May 18 02:52:23 2013] XMMSAS src. selection expression = ellipse(30992.078400, 33747.553200, 360.315610, 210.691806, 30.042382, X, Y)
[Sat May 18 02:52:23 2013] Writing source region out to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src28_src.reg
[Sat May 18 02:52:23 2013] Extracting stamp from image fullrun_mos2_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (336, 368) - (377, 409)
[Sat May 18 02:52:23 2013] XMMSAS bgd. selection expression = annulus(30992.078400, 33747.553200, 600.526017, 1201.052035, X, Y) && !ellipse(33571.456000, 35348.432000, 1833.192053, 1098.232032, 245.593000, X, Y) && !ellipse(29442.134000, 33272.104000, 814.760023, 283.534408, 350.169190, X, Y)
[Sat May 18 02:52:23 2013] Writing fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src28.gif
[Sat May 18 03:24:57 2013] Mean detx,y = (-3936.76, 6168.26) 
[Sat May 18 03:25:00 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 03:25:15 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 03:25:15 2013] Setting source spectrum file to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat May 18 03:25:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sat May 18 05:26:48 2013] Not generating rmf since there are only 87 counts
[Sat May 18 05:26:48 2013] rmf not generated due to insufficient counts
[Sat May 18 05:47:24 2013] Updating aperture counts using extracted products
[Sat May 18 05:47:24 2013] Total counts from fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 106.00
[Sat May 18 05:47:24 2013] Total counts from fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src28_bgd.pi.gz = 325.00
[Sat May 18 05:47:25 2013] Got source and background scale factors 211632.000000, 2802863.000000
[Sat May 18 05:47:25 2013] User source parameters:
  Position = (356.8, 388.5) = 5 36 9.18 -6 17 12.7
  Extent = 6.0 (4.7-8.0)" x 3.5 (2.8-4.5)", rotation angle = 30 (11-51) degrees
  Source aperture counts = 81.5 +/- 11.3
  Background aperture counts = 24.5
  Rate = 0.002 +/- 0.0002

[Sat May 18 05:47:39 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 05:47:39 2013] Using photon index=1.80, rate=0.00184, arf fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src28.arf
[Sat May 18 05:47:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 05:47:39 2013] Updating source flux to 4.3e-14
[Sat May 18 05:48:18 2013] Source 28 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 18 05:48:49 2013] xmm0089940301/analysis//spectral/fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete