[Fri May 17 01:18:54 2013] Detection parameters: Position = (385.2, 411.6) = 5 36 0.90 -6 15 31.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 113.8 +/- 15.9 Background counts = 31.7 Rate = 0.004 +/- 0.0006 [Fri May 17 01:18:57 2013] Off-axis axis estimate = 10.34' [Fri May 17 09:45:18 2013] Using EEF radius (= 11.60 ")to estimate initial spatial extent for simple fitting [Fri May 17 09:45:18 2013] Initial guess for spatial extent in simple fitting = 11.60" [Fri May 17 09:45:18 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.047 [Fri May 17 09:45:18 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 11.60" [Fri May 17 12:36:14 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src39.ximg exists [Fri May 17 12:36:14 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src39_1.ximg exists [Fri May 17 12:36:14 2013] Fit fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_src39 appears to have run properly [Fri May 17 12:36:15 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src39.ximg exists [Fri May 17 12:36:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src39.csv [Fri May 17 12:36:15 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists [Fri May 17 12:36:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src39.csv [Fri May 17 12:36:15 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src39_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 12:37:16 2013] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 11.582236 pixels away [Fri May 17 12:37:17 2013] Vigneting correction estimate = 1.000000 [Fri May 17 12:37:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 17 12:37:17 2013] Assessing source extent using major [Fri May 17 12:37:17 2013] Source does appear to be extended [Fri May 17 12:37:17 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 17 12:37:17 2013] Source is confused with source 6 [Fri May 17 18:28:33 2013] Using EEF radius (= 11.60 ")to estimate initial spatial extent for simple fitting [Fri May 17 18:28:33 2013] Initial guess for spatial extent in simple fitting = 11.60" [Fri May 17 18:28:33 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.047 [Fri May 17 18:28:33 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 11.60" [Fri May 17 21:10:36 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src39.ximg exists [Fri May 17 21:10:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src39.csv [Fri May 17 21:10:36 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src39_1.ximg exists [Fri May 17 21:10:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src39.csv [Fri May 17 21:10:36 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src39_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 21:10:37 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src39.ximg exists [Fri May 17 21:10:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src39.csv [Fri May 17 21:10:37 2013] fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists [Fri May 17 21:10:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src39.csv [Fri May 17 21:10:37 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src39_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 21:11:22 2013] Warning, spatial fit 39 centroid is now closest to src. 5 [Fri May 17 21:11:22 2013] Vigneting correction estimate = 1.000000 [Fri May 17 21:11:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 17 21:11:22 2013] Assessing source extent using major [Fri May 17 21:11:22 2013] Source does appear to be extended [Fri May 17 21:11:22 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 18 02:52:23 2013] XMMSAS src. selection expression = ellipse(33459.796387, 35763.135193, 652.500000, 652.500000, 0.000000, X, Y) [Sat May 18 02:52:23 2013] Writing source region out to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src26_src.reg [Sat May 18 02:52:23 2013] Extracting stamp from image fullrun_mos2_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (348, 374) - (423, 449) [Sat May 18 02:52:23 2013] XMMSAS bgd. selection expression = annulus(33459.796387, 35763.135193, 1087.500000, 2175.000000, X, Y) && !ellipse(34006.050079, 34578.508911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33571.456000, 35348.432000, 1833.192053, 1098.232032, 245.593000, X, Y) && !ellipse(31770.884460, 37077.273804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34557.635071, 35632.255524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30992.078400, 33747.553200, 480.420814, 280.922408, 30.042382, X, Y) && !ellipse(37478.332000, 39659.911200, 2216.552064, 315.436009, 18.151000, X, Y) && !ellipse(32142.933716, 38159.349579, 870.000000, 870.000000, 0.000000, X, Y) [Sat May 18 02:52:23 2013] Writing fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src26.gif [Sat May 18 03:25:23 2013] Mean detx,y = (-6483.45, 7986.10) [Sat May 18 03:25:26 2013] Setting backscal keywords in source and bgd. spectrum [Sat May 18 03:25:42 2013] Binned source spectrum to 10 counts/bin [Sat May 18 03:25:43 2013] Setting source spectrum file to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src26_src_b10.pi.gz [Sat May 18 03:25:43 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src26_bgd.pi.gz [Sat May 18 05:26:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat May 18 05:26:58 2013] rmf not generated due to insufficient counts [Sat May 18 05:47:25 2013] Updating aperture counts using extracted products [Sat May 18 05:47:25 2013] Total counts from fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 419.00 [Sat May 18 05:47:25 2013] Total counts from fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src26_bgd.pi.gz = 520.00 [Sat May 18 05:47:25 2013] Got source and background scale factors 1335180.000000, 5134316.000000 [Sat May 18 05:47:25 2013] User source parameters: Position = (385.2, 411.6) = 5 36 0.90 -6 15 31.4 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 283.8 +/- 21.5 Background aperture counts = 135.2 Rate = 0.006 +/- 0.0005 [Sat May 18 05:47:25 2013] Updating counts from extracted products [Sat May 18 05:47:25 2013] Set source signif. to 283.77/11.63 = 24.40 [Sat May 18 05:47:39 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 18 05:47:39 2013] Using photon index=1.80, rate=0.00595, arf fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src26.arf [Sat May 18 05:47:39 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 18 05:47:39 2013] Updating source flux to 1.2e-13 [Sat May 18 05:48:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat May 18 05:48:49 2013] xmm0089940301/analysis//spectral/fullrun_mos2_xmm0089940301_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete