[Fri May 17 01:18:00 2013] Detection parameters:
  Position = (327.8, 231.2) = 5 36 17.64 -6 28 37.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 343.9 +/- 34.3
  Background counts = 22.6
  Rate = 0.01 +/- 0.001

[Fri May 17 01:18:00 2013] Off-axis axis estimate = 5.32'
[Fri May 17 06:47:04 2013] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Fri May 17 06:47:04 2013] Initial guess for spatial extent in simple fitting = 9.09"
[Fri May 17 06:47:04 2013] source mask rpix=2.1, npix_max = 26, mask sum = 15, frac = 0.559
[Fri May 17 06:47:04 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 9.09"
[Fri May 17 09:45:16 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src20.ximg exists
[Fri May 17 09:45:16 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri May 17 09:45:16 2013] Fit fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src20 appears to have run properly
[Fri May 17 09:45:17 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri May 17 09:45:17 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri May 17 09:45:17 2013] Fit fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Fri May 17 12:36:59 2013] Spatial fit model total counts = 397.250000, observed total counts = 427.000000
[Fri May 17 12:36:59 2013] Offset between fit and detection position for source 68 = 0.177484 pixels
[Fri May 17 12:36:59 2013] 394.199000 total counts/ 160.504000 bgd. counts: snr = 18.446182
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 0.177484 pixels
  Position = (327.8, 231.3) = 5 36 17.64 -6 28 36.2
  Extent = 10.5 (9.0-12.6)" x 7.1 (5.7-8.8)", rotation angle = 15 (359-37) degrees
  Source counts = 233.7 +/- 19.9
  Background counts = 160.5
  Rate = 0.005 +/- 0.0004
[Fri May 17 12:36:59 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:36:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:36:59 2013] Assessing source extent using major axis lower bound
[Fri May 17 12:36:59 2013] Source does appear to be extended
[Fri May 17 12:36:59 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02
[Fri May 17 16:16:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 17 16:16:15 2013] Initial guess for spatial extent in simple fitting = 8.81"
[Fri May 17 16:16:15 2013] source mask rpix=2.0, npix_max = 25, mask sum = 15, frac = 0.588
[Fri May 17 16:16:15 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 8.81"
[Fri May 17 18:28:32 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src19.ximg exists
[Fri May 17 18:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src19.csv
[Fri May 17 18:28:32 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri May 17 18:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src19.csv
[Fri May 17 18:28:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 18:28:33 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri May 17 18:28:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri May 17 18:28:33 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri May 17 18:28:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri May 17 18:28:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 21:11:08 2013] Warning, spatial fit 19 centroid is now closest to src. 69
[Fri May 17 21:11:08 2013] Vigneting correction estimate = 1.000000
[Fri May 17 21:11:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 21:11:08 2013] Assessing source extent using major axis lower bound
[Fri May 17 21:11:08 2013] Source does appear to be extended
[Fri May 17 21:11:08 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02
[Sat May 18 00:29:39 2013] XMMSAS src. selection expression = ellipse(28467.004200, 20077.975600, 631.974018, 425.326212, 15.428854, X, Y)
[Sat May 18 00:29:39 2013] Writing source region out to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src68_src.reg
[Sat May 18 00:29:39 2013] Extracting stamp from image fullrun_mos1_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (291, 195) - (364, 268)
[Sat May 18 00:29:39 2013] XMMSAS bgd. selection expression = annulus(28467.004200, 20077.975600, 1053.290030, 2106.580061, X, Y) && !ellipse(27065.341600, 21980.097800, 445.592013, 356.273610, 6.706383, X, Y)
[Sat May 18 00:29:39 2013] Writing fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src68.gif
[Sat May 18 00:41:25 2013] Mean detx,y = (-7284.45, 1103.96) 
[Sat May 18 00:41:28 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 00:41:54 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 00:41:55 2013] Setting source spectrum file to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sat May 18 00:41:55 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Sat May 18 05:46:50 2013] Updating aperture counts using extracted products
[Sat May 18 05:46:50 2013] Total counts from fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src68_src_b10.pi.gz = 321.00
[Sat May 18 05:46:50 2013] Total counts from fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src68_bgd.pi.gz = 1034.00
[Sat May 18 05:46:50 2013] Got source and background scale factors 787204.000000, 9691578.000000
[Sat May 18 05:46:50 2013] User source parameters:
  Position = (327.8, 231.3) = 5 36 17.64 -6 28 36.2
  Extent = 10.5 (9.0-12.6)" x 7.1 (5.7-8.8)", rotation angle = 15 (359-37) degrees
  Source aperture counts = 237.0 +/- 18.9
  Background aperture counts = 84.0
  Rate = 0.005 +/- 0.0004

[Sat May 18 05:47:07 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 05:47:07 2013] Using photon index=1.80, rate=0.0049, arf fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src68.arf
[Sat May 18 05:47:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 05:47:07 2013] Updating source flux to 8.5e-14
[Sat May 18 05:48:18 2013] xmm0089940301/analysis//spectral/fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src68_pl.csv not found, spectral fit skipped or did not complete