[Fri May 17 01:17:56 2013] Detection parameters:
  Position = (391.4, 398.1) = 5 35 59.06 -6 16 30.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2429.9 +/- 59.3
  Background counts = 31.8
  Rate = 0.08 +/- 0.002

[Fri May 17 01:18:00 2013] Off-axis axis estimate = 9.88'
[Fri May 17 06:47:04 2013] Using EEF radius (= 11.37 ")to estimate initial spatial extent for simple fitting
[Fri May 17 06:47:04 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 17 06:47:04 2013] Initial guess for spatial extent in simple fitting = 11.37"
[Fri May 17 06:47:04 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.928
[Fri May 17 06:47:04 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 11.37"
[Fri May 17 09:45:15 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src3.ximg exists
[Fri May 17 09:45:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src3.csv
[Fri May 17 09:45:15 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri May 17 09:45:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src3.csv
[Fri May 17 09:45:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 09:45:17 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri May 17 09:45:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri May 17 09:45:17 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri May 17 09:45:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri May 17 09:45:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:36:58 2013] Warning, spatial fit 3 centroid is now closest to src. 27
[Fri May 17 12:36:58 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.142652 pixels away
[Fri May 17 12:36:59 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:36:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:36:59 2013] Assessing source extent using major
[Fri May 17 12:36:59 2013] Source does appear to be extended
[Fri May 17 12:36:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 12:36:59 2013] Source is confused with source 6
[Fri May 17 16:16:15 2013] Using EEF radius (= 11.37 ")to estimate initial spatial extent for simple fitting
[Fri May 17 16:16:15 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 17 16:16:15 2013] Initial guess for spatial extent in simple fitting = 11.37"
[Fri May 17 16:16:15 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.928
[Fri May 17 16:16:15 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 11.37"
[Fri May 17 18:28:31 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src3.ximg exists
[Fri May 17 18:28:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src3.csv
[Fri May 17 18:28:31 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri May 17 18:28:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src3.csv
[Fri May 17 18:28:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 18:28:32 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri May 17 18:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri May 17 18:28:32 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri May 17 18:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri May 17 18:28:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 21:11:08 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.842636 pixels away
[Fri May 17 21:11:08 2013] Vigneting correction estimate = 1.000000
[Fri May 17 21:11:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 21:11:08 2013] Assessing source extent using major
[Fri May 17 21:11:08 2013] Source does appear to be extended
[Fri May 17 21:11:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 00:29:39 2013] Counts = 2429.947754, rescaling region sizes by 2.000000
[Sat May 18 00:29:39 2013] XMMSAS src. selection expression = ellipse(34007.313873, 34586.755432, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat May 18 00:29:39 2013] Writing source region out to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src5_src.reg
[Sat May 18 00:29:39 2013] Extracting stamp from image fullrun_mos1_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (316, 323) - (466, 473)
[Sat May 18 00:29:39 2013] XMMSAS bgd. selection expression = annulus(34007.313873, 34586.755432, 4350.000000, 8700.000000, X, Y) && !ellipse(26310.439160, 33327.402400, 436.095213, 386.733611, 356.482689, X, Y) && !ellipse(37238.043793, 33267.375793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33805.894000, 35071.796000, 543.880016, 307.532009, 27.400000, X, Y) && !ellipse(29253.661804, 33181.421875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31783.302032, 37088.069153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30944.456146, 32051.154663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30634.084800, 30327.399600, 473.913614, 389.164011, 69.465719, X, Y) && !ellipse(28225.408064, 29602.881400, 421.933612, 367.288811, 359.161659, X, Y) && !ellipse(32383.784698, 40661.250061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36442.078800, 27118.299400, 562.152816, 448.538413, 102.323779, X, Y) && !ellipse(29354.242279, 38466.387787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34583.465851, 35624.359467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29891.835200, 26122.987600, 402.040017, 402.040017, 0.000000, X, Y) && !ellipse(31970.160339, 30772.253601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37910.787600, 39546.135400, 671.920019, 287.100808, 35.536100, X, Y) && !ellipse(31699.634094, 26266.567993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39418.673400, 27092.167000, 463.708813, 262.611208, 90.000000, X, Y) && !ellipse(40691.697937, 34568.143677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40514.969400, 26283.024200, 633.308018, 326.454409, 97.132650, X, Y) && !ellipse(30999.139130, 33709.661194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30335.030600, 27540.329600, 488.470414, 333.422410, 6.303076, X, Y) && !ellipse(31719.427338, 31825.227600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27462.070500, 28123.644200, 278.672008, 278.672008, 0.000000, X, Y) && !ellipse(37110.206787, 39801.235626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25504.133200, 26537.705200, 443.482443, 443.482443, 0.000000, X, Y) && !ellipse(28020.686800, 27719.382020, 788.256023, 275.069608, 299.858100, X, Y) && !ellipse(41430.589935, 25172.372009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39490.135223, 32670.551758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27464.360200, 33586.864000, 449.173613, 204.111206, 340.775800, X, Y) && !ellipse(26472.178320, 27519.761000, 319.538409, 319.538409, 0.000000, X, Y) && !ellipse(28627.786438, 33483.399597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30924.020386, 41813.737213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26827.870800, 30841.904200, 875.680025, 338.656810, 339.380211, X, Y) && !ellipse(34438.307434, 25916.613892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32478.560600, 29486.173400, 319.491209, 233.200807, 13.067000, X, Y) && !ellipse(38713.948029, 27455.561798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41654.148712, 32259.022217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37629.790710, 40303.984009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27016.762451, 28628.678528, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 18 00:29:39 2013] Writing fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src5.gif
[Sat May 18 00:30:57 2013] Mean detx,y = (7321.64, 6868.03) 
[Sat May 18 00:30:58 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 00:32:31 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 00:32:31 2013] Setting source spectrum file to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat May 18 00:32:31 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat May 18 01:15:16 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 18 01:15:16 2013] rmf not generated due to insufficient counts
[Sat May 18 05:46:43 2013] Updating aperture counts using extracted products
[Sat May 18 05:46:44 2013] Total counts from fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 3980.00
[Sat May 18 05:46:44 2013] Total counts from fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src5_bgd.pi.gz = 12186.00
[Sat May 18 05:46:44 2013] Got source and background scale factors 4332474.000000, 119778636.000000
[Sat May 18 05:46:44 2013] User source parameters:
  Position = (391.4, 398.1) = 5 35 59.06 -6 16 30.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 3539.2 +/- 64.1
  Background aperture counts = 440.8
  Rate = 0.07 +/- 0.001

[Sat May 18 05:46:44 2013] Updating counts from extracted products
[Sat May 18 05:46:44 2013] Set source signif. to 3539.22/20.99 = 168.58
[Sat May 18 05:47:06 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 05:47:06 2013] Using photon index=1.80, rate=0.0742, arf fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src5.arf
[Sat May 18 05:47:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 05:47:06 2013] Updating source flux to 1.2e-12
[Sat May 18 05:47:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 18 05:48:18 2013] xmm0089940301/analysis//spectral/fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete