[Fri May 17 01:17:58 2013] Detection parameters: Position = (325.2, 340.9) = 5 36 18.39 -6 20 39.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 793.4 +/- 34.5 Background counts = 32.9 Rate = 0.02 +/- 0.0007 [Fri May 17 01:18:00 2013] Off-axis axis estimate = 3.64' [Fri May 17 06:47:04 2013] Using EEF radius (= 8.25 ")to estimate initial spatial extent for simple fitting [Fri May 17 06:47:04 2013] Initial guess for spatial extent in simple fitting = 8.25" [Fri May 17 06:47:04 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.871 [Fri May 17 06:47:04 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 8.25" [Fri May 17 09:45:16 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src13.ximg exists [Fri May 17 09:45:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src13.csv [Fri May 17 09:45:16 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src13_1.ximg exists [Fri May 17 09:45:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src13.csv [Fri May 17 09:45:16 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src13_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 09:45:17 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists [Fri May 17 09:45:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src13.csv [Fri May 17 09:45:17 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists [Fri May 17 09:45:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src13.csv [Fri May 17 09:45:17 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 12:36:59 2013] Source 40 is offset by 6.131959 and -7.679161 pixels which is larger than 2 X fitted extent = 0.948032 x 0.948032, not incorporating fit results [Fri May 17 12:36:59 2013] Vigneting correction estimate = 1.000000 [Fri May 17 12:36:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 17 12:36:59 2013] Assessing source extent using major [Fri May 17 12:36:59 2013] Source does appear to be extended [Fri May 17 12:36:59 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 17 16:16:15 2013] Using EEF radius (= 8.25 ")to estimate initial spatial extent for simple fitting [Fri May 17 16:16:15 2013] Initial guess for spatial extent in simple fitting = 8.25" [Fri May 17 16:16:15 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.871 [Fri May 17 16:16:15 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 8.25" [Fri May 17 18:28:31 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src12.ximg exists [Fri May 17 18:28:31 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src12_1.ximg exists [Fri May 17 18:28:31 2013] Fit fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src12 appears to have run properly [Fri May 17 18:28:32 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src12.ximg exists [Fri May 17 18:28:32 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists [Fri May 17 18:28:32 2013] Fit fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly [Fri May 17 21:11:08 2013] Spatial fit model total counts = 826.709000, observed total counts = 836.000000 [Fri May 17 21:11:08 2013] Offset between fit and detection position for source 40 = 0.219499 pixels [Fri May 17 21:11:08 2013] 833.265000 total counts/ 301.386000 bgd. counts: snr = 30.637358 Spatial fit parameters: Offset between fit and detection position for source 40 = 0.219499 pixels Position = (325.0, 340.8) = 5 36 18.45 -6 20 39.9 Extent = 5.3 (4.7-5.9)" x 4.6 (4.2-5.4)", rotation angle = 359 (320-28) degrees Source counts = 531.9 +/- 28.9 Background counts = 301.4 Rate = 0.01 +/- 0.0006 [Fri May 17 21:11:08 2013] Vigneting correction estimate = 1.000000 [Fri May 17 21:11:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 17 21:11:08 2013] Assessing source extent using major axis lower bound [Fri May 17 21:11:08 2013] Source does appear to be extended [Fri May 17 21:11:08 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.87 [Sat May 18 00:29:39 2013] XMMSAS src. selection expression = ellipse(28225.408064, 29602.881400, 316.450209, 275.466608, 359.161659, X, Y) [Sat May 18 00:29:39 2013] Writing source region out to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src40_src.reg [Sat May 18 00:29:39 2013] Extracting stamp from image fullrun_mos1_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (307, 323) - (343, 359) [Sat May 18 00:29:39 2013] XMMSAS bgd. selection expression = annulus(28225.408064, 29602.881400, 527.417015, 1054.834030, X, Y) && !ellipse(26827.870800, 30841.904200, 875.680025, 338.656810, 339.380211, X, Y) && !ellipse(27016.762451, 28628.678528, 870.000000, 870.000000, 0.000000, X, Y) [Sat May 18 00:29:39 2013] Writing fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src40.gif [Sat May 18 00:39:01 2013] Mean detx,y = (2251.81, 988.20) [Sat May 18 00:39:02 2013] Setting backscal keywords in source and bgd. spectrum [Sat May 18 00:39:09 2013] Binned source spectrum to 10 counts/bin [Sat May 18 00:39:10 2013] Setting source spectrum file to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src40_src_b10.pi.gz [Sat May 18 00:39:10 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src40_bgd.pi.gz [Sat May 18 05:46:47 2013] Updating aperture counts using extracted products [Sat May 18 05:46:47 2013] Total counts from fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 572.00 [Sat May 18 05:46:47 2013] Total counts from fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src40_bgd.pi.gz = 289.00 [Sat May 18 05:46:47 2013] Got source and background scale factors 278400.000000, 2281308.000000 [Sat May 18 05:46:47 2013] User source parameters: Position = (325.0, 340.8) = 5 36 18.45 -6 20 39.9 Extent = 5.3 (4.7-5.9)" x 4.6 (4.2-5.4)", rotation angle = 359 (320-28) degrees Source aperture counts = 536.7 +/- 24.9 Background aperture counts = 35.3 Rate = 0.01 +/- 0.0005 [Sat May 18 05:47:07 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 18 05:47:07 2013] Using photon index=1.80, rate=0.0112, arf fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src40.arf [Sat May 18 05:47:07 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 18 05:47:07 2013] Updating source flux to 1.7e-13 [Sat May 18 05:47:45 2013] Flag b found in src. 40 procflags, skipping spectral fitting [Sat May 18 05:48:18 2013] xmm0089940301/analysis//spectral/fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete