[Fri May 17 01:17:58 2013] Detection parameters:
  Position = (374.1, 339.6) = 5 36 4.11 -6 20 46.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.9 +/- 12.2
  Background counts = 25.7
  Rate = 0.002 +/- 0.0003

[Fri May 17 01:18:00 2013] Off-axis axis estimate = 6.25'
[Fri May 17 06:47:04 2013] Using EEF radius (= 9.55 ")to estimate initial spatial extent for simple fitting
[Fri May 17 06:47:04 2013] Initial guess for spatial extent in simple fitting = 9.55"
[Fri May 17 06:47:04 2013] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.825
[Fri May 17 06:47:04 2013] Giving source the simple spatial ID 60 for pass 0, mean size = 9.55"
[Fri May 17 09:45:16 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src60.ximg exists
[Fri May 17 09:45:16 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src60_1.ximg exists
[Fri May 17 09:45:16 2013] Fit fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src60 appears to have run properly
[Fri May 17 09:45:18 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Fri May 17 09:45:18 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Fri May 17 09:45:18 2013] Fit fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src60 appears to have run properly
[Fri May 17 12:36:59 2013] Spatial fit model total counts = 263.503000, observed total counts = 264.000000
[Fri May 17 12:36:59 2013] Offset between fit and detection position for source 39 = 0.299769 pixels
[Fri May 17 12:36:59 2013] 259.951500 total counts/ 217.985000 bgd. counts: snr = 2.842428
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.299769 pixels
  Position = (373.9, 339.5) = 5 36 4.19 -6 20 45.7
  Extent = 4.0 (2.4-6.3)" x 2.9 (2.4-4.5)", rotation angle = 13
  Source counts = 42.0 +/- 16.1
  Background counts = 218.0
  Rate = 0.0009 +/- 0.0003
[Fri May 17 12:36:59 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:36:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:36:59 2013] Assessing source extent using major axis lower bound
[Fri May 17 12:36:59 2013] Source does appear to be extended
[Fri May 17 12:36:59 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.53
[Fri May 17 16:16:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 17 16:16:15 2013] Initial guess for spatial extent in simple fitting = 3.45"
[Fri May 17 16:16:15 2013] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.597
[Fri May 17 16:16:15 2013] Giving source the simple spatial ID 58 for pass 1, mean size = 3.45"
[Fri May 17 18:28:32 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src58.ximg exists
[Fri May 17 18:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src58.csv
[Fri May 17 18:28:32 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src58_1.ximg exists
[Fri May 17 18:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src58.csv
[Fri May 17 18:28:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 18:28:33 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Fri May 17 18:28:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src58.csv
[Fri May 17 18:28:33 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Fri May 17 18:28:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src58.csv
[Fri May 17 18:28:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 21:11:08 2013] Warning, spatial fit 58 centroid is now closest to src. 36
[Fri May 17 21:11:08 2013] Vigneting correction estimate = 1.000000
[Fri May 17 21:11:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 21:11:08 2013] Assessing source extent using major axis lower bound
[Fri May 17 21:11:08 2013] Source does appear to be extended
[Fri May 17 21:11:08 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.53
[Sat May 18 00:29:40 2013] XMMSAS src. selection expression = ellipse(32478.560600, 29486.173400, 239.618407, 174.900605, 13.067000, X, Y)
[Sat May 18 00:29:40 2013] Writing source region out to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src39_src.reg
[Sat May 18 00:29:40 2013] Extracting stamp from image fullrun_mos1_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (360, 326) - (388, 353)
[Sat May 18 00:29:40 2013] XMMSAS bgd. selection expression = annulus(32478.560600, 29486.173400, 399.364011, 798.728023, X, Y) && !ellipse(31970.160339, 30772.253601, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 18 00:29:40 2013] Writing fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src39.gif
[Sat May 18 00:59:15 2013] Mean detx,y = (2082.95, 5227.29) 
[Sat May 18 00:59:18 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 00:59:33 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 00:59:33 2013] Setting source spectrum file to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sat May 18 00:59:33 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sat May 18 02:49:47 2013] Not generating rmf since there are only 41 counts
[Sat May 18 02:49:47 2013] rmf not generated due to insufficient counts
[Sat May 18 05:47:03 2013] Updating aperture counts using extracted products
[Sat May 18 05:47:03 2013] Total counts from fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src39_src_b10.pi.gz = 56.00
[Sat May 18 05:47:03 2013] Total counts from fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src39_bgd.pi.gz = 128.00
[Sat May 18 05:47:03 2013] Got source and background scale factors 134400.000000, 1272488.000000
[Sat May 18 05:47:03 2013] User source parameters:
  Position = (373.9, 339.5) = 5 36 4.19 -6 20 45.7
  Extent = 4.0 (2.4-6.3)" x 2.9 (2.4-4.5)", rotation angle = 13
  Source aperture counts = 42.5 +/- 8.5
  Background aperture counts = 13.5
  Rate = 0.0009 +/- 0.0002

[Sat May 18 05:47:10 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 05:47:10 2013] Using photon index=1.80, rate=0.00088, arf fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src39.arf
[Sat May 18 05:47:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 05:47:10 2013] Updating source flux to 1.9e-14
[Sat May 18 05:47:45 2013] Source 39 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 18 05:48:18 2013] xmm0089940301/analysis//spectral/fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete