[Fri May 17 01:17:58 2013] Detection parameters:
  Position = (368.0, 354.3) = 5 36 5.89 -6 19 40.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 372.0 +/- 24.3
  Background counts = 32.4
  Rate = 0.009 +/- 0.0006

[Fri May 17 01:18:00 2013] Off-axis axis estimate = 6.47'
[Fri May 17 06:47:04 2013] Using EEF radius (= 9.66 ")to estimate initial spatial extent for simple fitting
[Fri May 17 06:47:04 2013] Initial guess for spatial extent in simple fitting = 9.66"
[Fri May 17 06:47:04 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.013
[Fri May 17 06:47:04 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 9.66"
[Fri May 17 09:45:16 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src25.ximg exists
[Fri May 17 09:45:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src25.csv
[Fri May 17 09:45:16 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri May 17 09:45:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src25.csv
[Fri May 17 09:45:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 09:45:17 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri May 17 09:45:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Fri May 17 09:45:17 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri May 17 09:45:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Fri May 17 09:45:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:36:59 2013] Warning, spatial fit 25 centroid is now closest to src. 34
[Fri May 17 12:36:59 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:36:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:36:59 2013] Assessing source extent using major
[Fri May 17 12:36:59 2013] Source does appear to be extended
[Fri May 17 12:36:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 16:16:15 2013] Using EEF radius (= 9.66 ")to estimate initial spatial extent for simple fitting
[Fri May 17 16:16:15 2013] Initial guess for spatial extent in simple fitting = 9.66"
[Fri May 17 16:16:15 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.013
[Fri May 17 16:16:15 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 9.66"
[Fri May 17 18:28:32 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src23.ximg exists
[Fri May 17 18:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src23.csv
[Fri May 17 18:28:32 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri May 17 18:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src23.csv
[Fri May 17 18:28:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 18:28:33 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri May 17 18:28:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri May 17 18:28:33 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri May 17 18:28:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri May 17 18:28:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 21:11:08 2013] Spatial fit model total counts = 561.881000, observed total counts = 502.000000
[Fri May 17 21:11:08 2013] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 17 21:11:08 2013] Warning: source 58 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 17.098061 pixels away
[Fri May 17 21:11:08 2013] Vigneting correction estimate = 1.000000
[Fri May 17 21:11:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 21:11:08 2013] Assessing source extent using major
[Fri May 17 21:11:08 2013] Source does appear to be extended
[Fri May 17 21:11:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 00:29:39 2013] XMMSAS src. selection expression = ellipse(31970.160339, 30772.253601, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 18 00:29:39 2013] Writing source region out to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src36_src.reg
[Sat May 18 00:29:39 2013] Extracting stamp from image fullrun_mos1_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (331, 317) - (406, 392)
[Sat May 18 00:29:39 2013] XMMSAS bgd. selection expression = annulus(31970.160339, 30772.253601, 1087.500000, 2175.000000, X, Y) && !ellipse(29253.661804, 33181.421875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30944.456146, 32051.154663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30634.084800, 30327.399600, 473.913614, 389.164011, 69.465719, X, Y) && !ellipse(30999.139130, 33709.661194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31719.427338, 31825.227600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32478.560600, 29486.173400, 319.491209, 233.200807, 13.067000, X, Y)
[Sat May 18 00:29:39 2013] Writing fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src36.gif
[Sat May 18 00:43:17 2013] Mean detx,y = (3372.45, 4715.10) 
[Sat May 18 00:43:19 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 00:43:41 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 00:43:41 2013] Setting source spectrum file to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat May 18 00:43:41 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Sat May 18 02:05:18 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 18 02:05:18 2013] rmf not generated due to insufficient counts
[Sat May 18 05:46:51 2013] Updating aperture counts using extracted products
[Sat May 18 05:46:51 2013] Total counts from fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 434.00
[Sat May 18 05:46:51 2013] Total counts from fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src36_bgd.pi.gz = 776.00
[Sat May 18 05:46:51 2013] Got source and background scale factors 1133796.000000, 6645056.000000
[Sat May 18 05:46:51 2013] User source parameters:
  Position = (368.0, 354.3) = 5 36 5.89 -6 19 40.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 301.6 +/- 21.9
  Background aperture counts = 132.4
  Rate = 0.006 +/- 0.0005

[Sat May 18 05:46:51 2013] Updating counts from extracted products
[Sat May 18 05:46:51 2013] Set source signif. to 301.60/11.51 = 26.21
[Sat May 18 05:47:08 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 05:47:08 2013] Using photon index=1.80, rate=0.00632, arf fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src36.arf
[Sat May 18 05:47:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 05:47:08 2013] Updating source flux to 8.6e-14
[Sat May 18 05:47:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 18 05:48:18 2013] xmm0089940301/analysis//spectral/fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete