[Fri May 17 01:17:58 2013] Detection parameters:
  Position = (316.4, 385.6) = 5 36 20.97 -6 17 18.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.8 +/- 14.2
  Background counts = 33.4
  Rate = 0.003 +/- 0.0004

[Fri May 17 01:18:00 2013] Off-axis axis estimate = 6.45'
[Fri May 17 06:47:04 2013] Using EEF radius (= 9.65 ")to estimate initial spatial extent for simple fitting
[Fri May 17 06:47:04 2013] Initial guess for spatial extent in simple fitting = 9.65"
[Fri May 17 06:47:04 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.845
[Fri May 17 06:47:04 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 9.65"
[Fri May 17 09:45:16 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src50.ximg exists
[Fri May 17 09:45:16 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src50_1.ximg exists
[Fri May 17 09:45:16 2013] Fit fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src50 appears to have run properly
[Fri May 17 09:45:17 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Fri May 17 09:45:17 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Fri May 17 09:45:17 2013] Fit fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly
[Fri May 17 12:36:59 2013] Spatial fit model total counts = 438.791000, observed total counts = 414.000000
[Fri May 17 12:36:59 2013] Offset between fit and detection position for source 31 = 1.039319 pixels
[Fri May 17 12:36:59 2013] 373.385000 total counts/ 326.308000 bgd. counts: snr = 2.606123
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.039319 pixels
  Position = (316.2, 386.6) = 5 36 21.01 -6 17 20.7
  Extent = 5.6 (2.9-13.3)" x 2.6 (2.4-4.5)", rotation angle = 341 (215-59) degrees
  Source counts = 47.1 +/- 19.3
  Background counts = 326.3
  Rate = 0.001 +/- 0.0004
[Fri May 17 12:36:59 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:36:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:36:59 2013] Assessing source extent using major axis lower bound
[Fri May 17 12:36:59 2013] Source does appear to be extended
[Fri May 17 12:36:59 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.64
[Fri May 17 16:16:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 17 16:16:15 2013] Initial guess for spatial extent in simple fitting = 4.08"
[Fri May 17 16:16:15 2013] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.087
[Fri May 17 16:16:15 2013] Giving source the simple spatial ID 48 for pass 1, mean size = 4.08"
[Fri May 17 18:28:32 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src48.ximg exists
[Fri May 17 18:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src48.csv
[Fri May 17 18:28:32 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src48_1.ximg exists
[Fri May 17 18:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src48.csv
[Fri May 17 18:28:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 18:28:33 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Fri May 17 18:28:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src48.csv
[Fri May 17 18:28:33 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Fri May 17 18:28:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src48.csv
[Fri May 17 18:28:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 21:11:08 2013] Source 31 is offset by -0.262361 and -1.720708 pixels which is larger than
2 X fitted extent = 0.588317 x 0.588317, not incorporating fit results
[Fri May 17 21:11:08 2013] Vigneting correction estimate = 1.000000
[Fri May 17 21:11:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 21:11:08 2013] Assessing source extent using major axis lower bound
[Fri May 17 21:11:08 2013] Source does appear to be extended
[Fri May 17 21:11:08 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.64
[Sat May 18 00:29:40 2013] XMMSAS src. selection expression = ellipse(27464.360200, 33586.864000, 336.880210, 153.083404, 340.775800, X, Y)
[Sat May 18 00:29:40 2013] Writing source region out to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src31_src.reg
[Sat May 18 00:29:40 2013] Extracting stamp from image fullrun_mos1_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (297, 367) - (336, 406)
[Sat May 18 00:29:40 2013] XMMSAS bgd. selection expression = annulus(27464.360200, 33586.864000, 561.467016, 1122.934032, X, Y) && !ellipse(26310.439160, 33327.402400, 436.095213, 386.733611, 356.482689, X, Y) && !ellipse(29253.661804, 33181.421875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28627.786438, 33483.399597, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 18 00:29:40 2013] Writing fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src31.gif
[Sat May 18 00:54:22 2013] Mean detx,y = (6259.52, 262.59) 
[Sat May 18 00:54:24 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 00:54:37 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 00:54:38 2013] Setting source spectrum file to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat May 18 00:54:38 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sat May 18 02:48:08 2013] Not generating rmf since there are only 47 counts
[Sat May 18 02:48:08 2013] rmf not generated due to insufficient counts
[Sat May 18 05:46:59 2013] Updating aperture counts using extracted products
[Sat May 18 05:46:59 2013] Total counts from fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 80.00
[Sat May 18 05:47:00 2013] Total counts from fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src31_bgd.pi.gz = 386.00
[Sat May 18 05:47:00 2013] Got source and background scale factors 158212.000000, 1842147.000000
[Sat May 18 05:47:00 2013] User source parameters:
  Position = (316.2, 386.6) = 5 36 21.01 -6 17 20.7
  Extent = 5.6 (2.9-13.3)" x 2.6 (2.4-4.5)", rotation angle = 341 (215-59) degrees
  Source aperture counts = 46.8 +/- 10.0
  Background aperture counts = 33.2
  Rate = 0.001 +/- 0.0002

[Sat May 18 05:47:09 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 05:47:09 2013] Using photon index=1.80, rate=0.000987, arf fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src31.arf
[Sat May 18 05:47:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 05:47:09 2013] Updating source flux to 2.1e-14
[Sat May 18 05:47:45 2013] Flag b found in src. 31 procflags, skipping spectral fitting
[Sat May 18 05:47:45 2013] Source 31 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 18 05:48:18 2013] xmm0089940301/analysis//spectral/fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete