[Fri May 17 01:17:57 2013] Detection parameters:
  Position = (329.6, 385.4) = 5 36 17.10 -6 17 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.8 +/- 14.4
  Background counts = 33.5
  Rate = 0.003 +/- 0.0004

[Fri May 17 01:18:00 2013] Off-axis axis estimate = 6.70'
[Fri May 17 06:47:04 2013] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Fri May 17 06:47:04 2013] Initial guess for spatial extent in simple fitting = 9.78"
[Fri May 17 06:47:04 2013] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.828
[Fri May 17 06:47:04 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 9.78"
[Fri May 17 09:45:16 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src55.ximg exists
[Fri May 17 09:45:16 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src55_1.ximg exists
[Fri May 17 09:45:16 2013] Fit fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src55 appears to have run properly
[Fri May 17 09:45:17 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Fri May 17 09:45:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src55.csv
[Fri May 17 09:45:17 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Fri May 17 09:45:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src55.csv
[Fri May 17 09:45:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:36:58 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 11.509103 pixels away
[Fri May 17 12:36:59 2013] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 11.255742 pixels away
[Fri May 17 12:36:59 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:36:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:36:59 2013] Assessing source extent using major
[Fri May 17 12:36:59 2013] Source does appear to be extended
[Fri May 17 12:36:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 16:16:15 2013] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Fri May 17 16:16:15 2013] Initial guess for spatial extent in simple fitting = 9.78"
[Fri May 17 16:16:15 2013] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.828
[Fri May 17 16:16:15 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 9.78"
[Fri May 17 18:28:32 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src53.ximg exists
[Fri May 17 18:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src53.csv
[Fri May 17 18:28:32 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src53_1.ximg exists
[Fri May 17 18:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src53.csv
[Fri May 17 18:28:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 18:28:33 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Fri May 17 18:28:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src53.csv
[Fri May 17 18:28:33 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Fri May 17 18:28:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src53.csv
[Fri May 17 18:28:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 21:11:08 2013] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 13.556211 pixels away
[Fri May 17 21:11:08 2013] Vigneting correction estimate = 1.000000
[Fri May 17 21:11:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 21:11:08 2013] Assessing source extent using major
[Fri May 17 21:11:08 2013] Source does appear to be extended
[Fri May 17 21:11:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 00:29:40 2013] XMMSAS src. selection expression = ellipse(28627.786438, 33483.399597, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 18 00:29:40 2013] Writing source region out to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src30_src.reg
[Sat May 18 00:29:40 2013] Extracting stamp from image fullrun_mos1_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (292, 348) - (367, 423)
[Sat May 18 00:29:40 2013] XMMSAS bgd. selection expression = annulus(28627.786438, 33483.399597, 1087.500000, 2175.000000, X, Y) && !ellipse(26310.439160, 33327.402400, 436.095213, 386.733611, 356.482689, X, Y) && !ellipse(29253.661804, 33181.421875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30944.456146, 32051.154663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30999.139130, 33709.661194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27464.360200, 33586.864000, 449.173613, 204.111206, 340.775800, X, Y) && !ellipse(26827.870800, 30841.904200, 875.680025, 338.656810, 339.380211, X, Y)
[Sat May 18 00:29:40 2013] Writing fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src30.gif
[Sat May 18 00:56:38 2013] Mean detx,y = (5981.51, 1695.67) 
[Sat May 18 00:56:41 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 00:57:09 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 00:57:09 2013] Setting source spectrum file to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat May 18 00:57:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sat May 18 02:48:53 2013] Not generating rmf since there are only 95 counts
[Sat May 18 02:48:53 2013] rmf not generated due to insufficient counts
[Sat May 18 05:47:01 2013] Updating aperture counts using extracted products
[Sat May 18 05:47:02 2013] Total counts from fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 507.00
[Sat May 18 05:47:02 2013] Total counts from fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src30_bgd.pi.gz = 1092.00
[Sat May 18 05:47:02 2013] Got source and background scale factors 1120976.000000, 8165100.000000
[Sat May 18 05:47:02 2013] User source parameters:
  Position = (329.6, 385.4) = 5 36 17.10 -6 17 25.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 357.1 +/- 23.5
  Background aperture counts = 149.9
  Rate = 0.007 +/- 0.0005

[Sat May 18 05:47:02 2013] Updating counts from extracted products
[Sat May 18 05:47:02 2013] Set source signif. to 357.08/12.24 = 29.16
[Sat May 18 05:47:09 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 05:47:09 2013] Using photon index=1.80, rate=0.00749, arf fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src30.arf
[Sat May 18 05:47:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 05:47:10 2013] Updating source flux to 1.1e-13
[Sat May 18 05:47:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 18 05:48:18 2013] xmm0089940301/analysis//spectral/fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete