[Fri May 17 01:17:57 2013] Detection parameters: Position = (433.1, 463.8) = 5 35 46.92 -6 11 43.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 57.1 +/- 11.1 Background counts = 21.8 Rate = 0.001 +/- 0.0002 [Fri May 17 01:18:00 2013] Off-axis axis estimate = 15.46' [Fri May 17 06:47:04 2013] Using EEF radius (= 14.16 ")to estimate initial spatial extent for simple fitting [Fri May 17 06:47:04 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri May 17 06:47:04 2013] Initial guess for spatial extent in simple fitting = 14.16" [Fri May 17 06:47:04 2013] source mask rpix=3.3, npix_max = 56, mask sum = 64, frac = 1.135 [Fri May 17 06:47:04 2013] Giving source the simple spatial ID 72 for pass 0, mean size = 14.16" [Fri May 17 09:45:17 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src72.ximg exists [Fri May 17 09:45:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src72.csv [Fri May 17 09:45:17 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src72_1.ximg exists [Fri May 17 09:45:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src72.csv [Fri May 17 09:45:17 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src72_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 09:45:18 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src72.ximg exists [Fri May 17 09:45:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src72.csv [Fri May 17 09:45:18 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists [Fri May 17 09:45:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src72.csv [Fri May 17 09:45:18 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src72_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0089940301_pi300-10000_cl_pass0_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 12:36:59 2013] Warning: source 72 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 11.478052 pixels away [Fri May 17 12:36:59 2013] Vigneting correction estimate = 1.000000 [Fri May 17 12:36:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 17 12:36:59 2013] Assessing source extent using major [Fri May 17 12:36:59 2013] Source does appear to be extended [Fri May 17 12:36:59 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 17 16:16:15 2013] Using EEF radius (= 14.16 ")to estimate initial spatial extent for simple fitting [Fri May 17 16:16:15 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri May 17 16:16:15 2013] Initial guess for spatial extent in simple fitting = 14.16" [Fri May 17 16:16:15 2013] source mask rpix=3.3, npix_max = 56, mask sum = 64, frac = 1.135 [Fri May 17 16:16:15 2013] Giving source the simple spatial ID 68 for pass 1, mean size = 14.16" [Fri May 17 18:28:32 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src68.ximg exists [Fri May 17 18:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src68.csv [Fri May 17 18:28:32 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src68_1.ximg exists [Fri May 17 18:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src68.csv [Fri May 17 18:28:32 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src68_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 18:28:33 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src68.ximg exists [Fri May 17 18:28:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src68.csv [Fri May 17 18:28:33 2013] fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists [Fri May 17 18:28:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src68.csv [Fri May 17 18:28:33 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src68_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0089940301_pi300-10000_cl_pass1_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 17 21:11:08 2013] Source 21 is offset by 2.595410 and 2.310046 pixels which is larger than 2 X fitted extent = 0.688952 x 0.688952, not incorporating fit results [Fri May 17 21:11:08 2013] Source 21 is offset by -5.399095 and 7.857770 pixels which is larger than 2 X fitted extent = 1.593145 x 1.593145, not incorporating fit results [Fri May 17 21:11:08 2013] Warning: source 68 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 11.272097 pixels away [Fri May 17 21:11:08 2013] Vigneting correction estimate = 1.000000 [Fri May 17 21:11:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 17 21:11:08 2013] Assessing source extent using major [Fri May 17 21:11:08 2013] Source does appear to be extended [Fri May 17 21:11:08 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 18 00:29:40 2013] XMMSAS src. selection expression = ellipse(37629.790710, 40303.984009, 652.500000, 652.500000, 0.000000, X, Y) [Sat May 18 00:29:40 2013] Writing source region out to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src21_src.reg [Sat May 18 00:29:40 2013] Extracting stamp from image fullrun_mos1_xmm0089940301_pi300-10000_cl_sm2.00.img.gz, (396, 426) - (471, 501) [Sat May 18 00:29:40 2013] XMMSAS bgd. selection expression = annulus(37629.790710, 40303.984009, 1087.500000, 2175.000000, X, Y) && !ellipse(37910.787600, 39546.135400, 671.920019, 287.100808, 35.536100, X, Y) && !ellipse(37110.206787, 39801.235626, 870.000000, 870.000000, 0.000000, X, Y) [Sat May 18 00:29:40 2013] Writing fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src21.gif [Sat May 18 01:03:26 2013] Mean detx,y = (12578.63, 10483.21) [Sat May 18 01:03:29 2013] Setting backscal keywords in source and bgd. spectrum [Sat May 18 01:03:51 2013] Binned source spectrum to 10 counts/bin [Sat May 18 01:03:52 2013] Setting source spectrum file to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src21_src_b10.pi.gz [Sat May 18 01:03:52 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src21_bgd.pi.gz [Sat May 18 02:51:16 2013] Not generating rmf since there are only 57 counts [Sat May 18 02:51:16 2013] rmf not generated due to insufficient counts [Sat May 18 05:47:05 2013] Updating aperture counts using extracted products [Sat May 18 05:47:05 2013] Total counts from fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 208.00 [Sat May 18 05:47:05 2013] Total counts from fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src21_bgd.pi.gz = 363.00 [Sat May 18 05:47:05 2013] Got source and background scale factors 1025468.000000, 4218884.000000 [Sat May 18 05:47:05 2013] User source parameters: Position = (433.1, 463.8) = 5 35 46.92 -6 11 43.5 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 119.8 +/- 15.4 Background aperture counts = 88.2 Rate = 0.003 +/- 0.0003 [Sat May 18 05:47:05 2013] Updating counts from extracted products [Sat May 18 05:47:05 2013] Set source signif. to 119.77/9.39 = 12.75 [Sat May 18 05:47:11 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 18 05:47:11 2013] Using photon index=1.80, rate=0.00251, arf fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src21.arf [Sat May 18 05:47:11 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 18 05:47:11 2013] Updating source flux to 7.9e-14 [Sat May 18 05:47:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat May 18 05:48:18 2013] xmm0089940301/analysis//spectral/fullrun_mos1_xmm0089940301_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete