[Fri Jun  1 08:43:12 2012] Detection parameters:
  Position = (121.8, 329.6) = 3 26 33.57 30 47 21.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.1 +/- 13.4
  Background counts = 40.1
  Rate = 0.002 +/- 0.0004

[Fri Jun  1 08:43:12 2012] Off-axis axis estimate = 13.00'
[Fri Jun  1 09:02:01 2012] Using EEF radius (= 12.93 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 09:02:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  1 09:02:01 2012] Initial guess for spatial extent in simple fitting = 12.93"
[Fri Jun  1 09:02:01 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.016
[Fri Jun  1 09:02:01 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 12.93"
[Fri Jun  1 09:14:51 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_src9.ximg exists
[Fri Jun  1 09:14:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_src9.csv
[Fri Jun  1 09:14:51 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Jun  1 09:14:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_src9.csv
[Fri Jun  1 09:14:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 09:14:51 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Jun  1 09:14:51 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Jun  1 09:14:51 2012] Fit fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Jun  1 09:14:55 2012] Spatial fit model total counts = 325.432000, observed total counts = 313.000000
[Fri Jun  1 09:14:55 2012] Offset between fit and detection position for source 5 = 0.087404 pixels
[Fri Jun  1 09:14:55 2012] 324.169200 total counts/ 289.854000 bgd. counts: snr = 2.015565
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.087404 pixels
  Position = (121.9, 329.5) = 3 26 33.56 30 47 20.3
  Extent = 4.4 (3.2-6.5)", rotation angle = 0
  Source counts = 34.3 +/- 18.0
  Background counts = 289.9
  Rate = 0.001 +/- 0.0006
[Fri Jun  1 09:14:55 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 09:14:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 09:14:55 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 09:14:55 2012] Source does appear to be extended
[Fri Jun  1 09:14:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 09:31:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 09:31:42 2012] Initial guess for spatial extent in simple fitting = 4.36"
[Fri Jun  1 09:31:42 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.998
[Fri Jun  1 09:31:42 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 4.36"
[Fri Jun  1 09:41:13 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_src8.ximg exists
[Fri Jun  1 09:41:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_src8.csv
[Fri Jun  1 09:41:13 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Jun  1 09:41:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_src8.csv
[Fri Jun  1 09:41:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 09:41:13 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Jun  1 09:41:13 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Jun  1 09:41:13 2012] Fit fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Jun  1 09:41:18 2012] Spatial fit model total counts = 264.819000, observed total counts = 259.000000
[Fri Jun  1 09:41:18 2012] Offset between fit and detection position for source 5 = 0.005116 pixels
[Fri Jun  1 09:41:18 2012] 263.589500 total counts/ 228.870000 bgd. counts: snr = 2.294981
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.005116 pixels
  Position = (121.9, 329.5) = 3 26 33.56 30 47 20.4
  Extent = 4.5 (3.2-6.4)", rotation angle = 0
  Source counts = 34.7 +/- 16.2
  Background counts = 228.9
  Rate = 0.001 +/- 0.0006
[Fri Jun  1 09:41:18 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 09:41:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 09:41:18 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 09:41:18 2012] Source does appear to be extended
[Fri Jun  1 09:41:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 09:55:01 2012] XMMSAS src. selection expression = ellipse(10555.520600, 28621.649000, 268.323008, 268.323008, 0.000000, X, Y)
[Fri Jun  1 09:55:01 2012] Writing source region out to fullrun_mos2_xmm0089940201_pi300-10000_pass1_cl_src5_src.reg
[Fri Jun  1 09:55:01 2012] Extracting stamp from image fullrun_mos2_xmm0089940201_pi300-10000_cl_sm2.00.img.gz, (106, 314) - (137, 345)
[Fri Jun  1 09:55:01 2012] XMMSAS bgd. selection expression = annulus(10555.520600, 28621.649000, 447.205013, 894.410026, X, Y)
[Fri Jun  1 09:55:01 2012] Writing fullrun_mos2_xmm0089940201_pi300-10000_pass1_cl_src5.gif
[Fri Jun  1 09:57:00 2012] Mean detx,y = (-14343.46, -151.49) 
[Fri Jun  1 09:57:01 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 09:57:10 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 09:57:10 2012] Setting source spectrum file to fullrun_mos2_xmm0089940201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun  1 09:57:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0089940201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jun  1 10:02:07 2012] Not generating rmf since there are only 34 counts
[Fri Jun  1 10:02:07 2012] rmf not generated due to insufficient counts
[Fri Jun  1 10:03:27 2012] Updating aperture counts using extracted products
[Fri Jun  1 10:03:27 2012] Error reading totcts from fullrun_mos2_xmm0089940201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun  1 10:03:27 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 10:03:27 2012] Using photon index=1.80, rate=0.00121, arf fullrun_mos2_xmm0089940201_pi300-10000_pass1_cl_src5.arf
[Fri Jun  1 10:03:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 10:03:27 2012] Updating source flux to 3.6e-14
[Fri Jun  1 10:03:39 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting