[Fri Jun  1 08:43:12 2012] Detection parameters:
  Position = (384.6, 455.9) = 3 25 4.83 30 56 32.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.6 +/- 12.6
  Background counts = 32.3
  Rate = 0.002 +/- 0.0004

[Fri Jun  1 08:43:12 2012] Off-axis axis estimate = 13.01'
[Fri Jun  1 09:02:01 2012] Using EEF radius (= 12.93 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 09:02:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  1 09:02:01 2012] Initial guess for spatial extent in simple fitting = 12.93"
[Fri Jun  1 09:02:01 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.015
[Fri Jun  1 09:02:01 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 12.93"
[Fri Jun  1 09:14:51 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_src10.ximg exists
[Fri Jun  1 09:14:51 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Jun  1 09:14:51 2012] Fit fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_src10 appears to have run properly
[Fri Jun  1 09:14:51 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Jun  1 09:14:51 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Jun  1 09:14:51 2012] Fit fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Jun  1 09:14:55 2012] Spatial fit model total counts = 267.178000, observed total counts = 251.000000
[Fri Jun  1 09:14:55 2012] Offset between fit and detection position for source 3 = 0.524863 pixels
[Fri Jun  1 09:14:55 2012] 257.937400 total counts/ 218.968000 bgd. counts: snr = 2.633500
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.524863 pixels
  Position = (385.0, 456.1) = 3 25 4.68 30 56 31.7
  Extent = 9.1" x 3.2", rotation angle = 26
  Source counts = 39.0 +/- 16.1
  Background counts = 219.0
  Rate = 0.001 +/- 0.0006
[Fri Jun  1 09:14:55 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 09:14:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 09:14:55 2012] Assessing source extent using major
[Fri Jun  1 09:14:55 2012] Source does appear to be extended
[Fri Jun  1 09:14:55 2012] Computing asymmetry using major and minor axis, asym = 2.81
[Fri Jun  1 09:14:55 2012] Source is asymmetric
[Fri Jun  1 09:31:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 09:31:42 2012] Initial guess for spatial extent in simple fitting = 6.16"
[Fri Jun  1 09:31:42 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.090
[Fri Jun  1 09:31:42 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 6.16"
[Fri Jun  1 09:41:13 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_src9.ximg exists
[Fri Jun  1 09:41:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_src9.csv
[Fri Jun  1 09:41:13 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Jun  1 09:41:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_src9.csv
[Fri Jun  1 09:41:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 09:41:13 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Jun  1 09:41:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri Jun  1 09:41:13 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Jun  1 09:41:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri Jun  1 09:41:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 09:41:18 2012] Warning, spatial fit 9 centroid is now closest to src. 4
[Fri Jun  1 09:41:18 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 09:41:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 09:41:18 2012] Assessing source extent using major
[Fri Jun  1 09:41:18 2012] Source does appear to be extended
[Fri Jun  1 09:41:18 2012] Computing asymmetry using major and minor axis, asym = 2.81
[Fri Jun  1 09:41:18 2012] Source is asymmetric
[Fri Jun  1 09:55:01 2012] XMMSAS src. selection expression = ellipse(33449.867263, 39634.940631, 544.886260, 194.013606, 25.638877, X, Y)
[Fri Jun  1 09:55:01 2012] Writing source region out to fullrun_mos2_xmm0089940201_pi300-10000_pass1_cl_src3_src.reg
[Fri Jun  1 09:55:01 2012] Extracting stamp from image fullrun_mos2_xmm0089940201_pi300-10000_cl_sm2.00.img.gz, (354, 425) - (416, 487)
[Fri Jun  1 09:55:01 2012] XMMSAS bgd. selection expression = annulus(33449.867263, 39634.940631, 908.143767, 1816.287534, X, Y)
[Fri Jun  1 09:55:01 2012] Writing fullrun_mos2_xmm0089940201_pi300-10000_pass1_cl_src3.gif
[Fri Jun  1 09:57:13 2012] Mean detx,y = (4773.24, -16804.09) 
[Fri Jun  1 09:57:14 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 09:57:27 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 09:57:27 2012] Setting source spectrum file to fullrun_mos2_xmm0089940201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun  1 09:57:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0089940201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jun  1 10:02:12 2012] Not generating rmf since there are only 38 counts
[Fri Jun  1 10:02:12 2012] rmf not generated due to insufficient counts
[Fri Jun  1 10:03:27 2012] Updating aperture counts using extracted products
[Fri Jun  1 10:03:27 2012] Error reading totcts from fullrun_mos2_xmm0089940201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun  1 10:03:27 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 10:03:27 2012] Using photon index=1.80, rate=0.00136, arf fullrun_mos2_xmm0089940201_pi300-10000_pass1_cl_src3.arf
[Fri Jun  1 10:03:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 10:03:27 2012] Updating source flux to 5.8e-14
[Fri Jun  1 10:03:39 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting