[Fri Jun  1 08:43:12 2012] Detection parameters:
  Position = (341.4, 150.3) = 3 25 19.50 30 34 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 358.1 +/- 24.5
  Background counts = 36.2
  Rate = 0.01 +/- 0.0007

[Fri Jun  1 08:43:12 2012] Off-axis axis estimate = 11.18'
[Fri Jun  1 09:02:01 2012] Using EEF radius (= 12.02 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 09:02:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  1 09:02:01 2012] Initial guess for spatial extent in simple fitting = 12.02"
[Fri Jun  1 09:02:01 2012] source mask rpix=2.8, npix_max = 42, mask sum = 48, frac = 1.127
[Fri Jun  1 09:02:01 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.02"
[Fri Jun  1 09:14:51 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun  1 09:14:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_src1.csv
[Fri Jun  1 09:14:51 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun  1 09:14:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_src1.csv
[Fri Jun  1 09:14:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 09:14:51 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun  1 09:14:51 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun  1 09:14:51 2012] Fit fullrun_mos2_xmm0089940201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun  1 09:14:55 2012] Spatial fit model total counts = 683.040000, observed total counts = 681.000000
[Fri Jun  1 09:14:55 2012] Offset between fit and detection position for source 1 = 0.120397 pixels
[Fri Jun  1 09:14:55 2012] 683.770000 total counts/ 476.885000 bgd. counts: snr = 9.473756
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.120397 pixels
  Position = (341.4, 150.4) = 3 25 19.48 30 34 22.0
  Extent = 5.4 (4.6-6.2)", rotation angle = 0
  Source counts = 206.9 +/- 26.1
  Background counts = 476.9
  Rate = 0.007 +/- 0.0009
[Fri Jun  1 09:14:55 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 09:14:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 09:14:55 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 09:14:55 2012] Source does appear to be extended
[Fri Jun  1 09:14:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 09:31:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 09:31:42 2012] Initial guess for spatial extent in simple fitting = 5.43"
[Fri Jun  1 09:31:42 2012] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.736
[Fri Jun  1 09:31:42 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.43"
[Fri Jun  1 09:41:13 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun  1 09:41:13 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun  1 09:41:13 2012] Fit fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Jun  1 09:41:13 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun  1 09:41:13 2012] fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun  1 09:41:13 2012] Fit fullrun_mos2_xmm0089940201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun  1 09:41:18 2012] Spatial fit model total counts = 483.568000, observed total counts = 480.000000
[Fri Jun  1 09:41:18 2012] Offset between fit and detection position for source 1 = 0.015350 pixels
[Fri Jun  1 09:41:18 2012] 485.862000 total counts/ 288.901000 bgd. counts: snr = 11.587926
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.015350 pixels
  Position = (341.4, 150.4) = 3 25 19.49 30 34 22.0
  Extent = 5.1 (4.4-5.9)", rotation angle = 0
  Source counts = 197.0 +/- 22.0
  Background counts = 288.9
  Rate = 0.007 +/- 0.0008
[Fri Jun  1 09:41:18 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 09:41:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 09:41:18 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 09:41:18 2012] Source does appear to be extended
[Fri Jun  1 09:41:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 09:55:01 2012] XMMSAS src. selection expression = ellipse(29653.452800, 13038.230000, 304.973409, 304.973409, 0.000000, X, Y)
[Fri Jun  1 09:55:01 2012] Writing source region out to fullrun_mos2_xmm0089940201_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun  1 09:55:01 2012] Extracting stamp from image fullrun_mos2_xmm0089940201_pi300-10000_cl_sm2.00.img.gz, (324, 133) - (359, 168)
[Fri Jun  1 09:55:01 2012] XMMSAS bgd. selection expression = annulus(29653.452800, 13038.230000, 508.289015, 1016.578029, X, Y)
[Fri Jun  1 09:55:01 2012] Writing fullrun_mos2_xmm0089940201_pi300-10000_pass1_cl_src1.gif
[Fri Jun  1 09:55:03 2012] Mean detx,y = (8214.29, 9797.93) 
[Fri Jun  1 09:55:04 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 09:55:10 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 09:55:10 2012] Setting source spectrum file to fullrun_mos2_xmm0089940201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  1 09:55:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0089940201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun  1 10:03:26 2012] Updating aperture counts using extracted products
[Fri Jun  1 10:03:26 2012] Error reading totcts from fullrun_mos2_xmm0089940201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  1 10:03:27 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 10:03:27 2012] Using photon index=1.80, rate=0.00687, arf fullrun_mos2_xmm0089940201_pi300-10000_pass1_cl_src1.arf
[Fri Jun  1 10:03:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 10:03:27 2012] Updating source flux to 2.6e-13
[Fri Jun  1 10:03:51 2012] Reading fit data from xmm0089940201/analysis//spectral/fullrun_mos2_xmm0089940201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun  1 10:03:51 2012] Spectral fit parameter nH value = 4.15222e+21
[Fri Jun  1 10:03:51 2012] Spectral fit parameter PhoIndex value = 2.48114
[Fri Jun  1 10:03:51 2012] Failed to get F(0.3-8.0) from xmm0089940201/analysis//spectral/fullrun_mos2_xmm0089940201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun  1 10:03:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 10:03:51 2012] Using Nh = 4.2e+21, photon index=2.48, rate=0.00687, arf fullrun_mos2_xmm0089940201_pi300-10000_pass1_cl_src1.arf
[Fri Jun  1 10:03:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 10:03:51 2012] Updating source flux to 2.7e-13