[Sun Jun 23 18:50:17 2013] Detection parameters:
  Position = (210.0, 177.8) = 5 55 54.17 22 0 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.1 +/- 7.0
  Background counts = 4.6
  Rate = 0.001 +/- 0.0003

[Sun Jun 23 18:50:17 2013] Off-axis axis estimate = 10.84'
[Sun Jun 23 19:11:37 2013] Using EEF radius (= 11.85 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 19:11:37 2013] Initial guess for spatial extent in simple fitting = 11.85"
[Sun Jun 23 19:11:37 2013] source mask rpix=2.7, npix_max = 41, mask sum = 24, frac = 0.577
[Sun Jun 23 19:11:37 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 11.85"
[Sun Jun 23 19:19:50 2013] fullrun_mos1_xmm0089370501_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jun 23 19:19:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089370501_pi300-10000_cl_pass0_src5.csv
[Sun Jun 23 19:19:50 2013] fullrun_mos1_xmm0089370501_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jun 23 19:19:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089370501_pi300-10000_cl_pass0_src5.csv
[Sun Jun 23 19:19:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089370501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089370501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 19:19:50 2013] fullrun_mos1_xmm0089370501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jun 23 19:19:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089370501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jun 23 19:19:50 2013] fullrun_mos1_xmm0089370501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jun 23 19:19:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089370501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jun 23 19:19:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089370501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089370501_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 19:26:42 2013] Spatial fit model total counts = 83.881800, observed total counts = 58.000000
[Sun Jun 23 19:26:42 2013] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 19:26:42 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 19:26:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 19:26:42 2013] Assessing source extent using major
[Sun Jun 23 19:26:42 2013] Source does appear to be extended
[Sun Jun 23 19:26:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 19:46:24 2013] Using EEF radius (= 11.85 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 19:46:24 2013] Initial guess for spatial extent in simple fitting = 11.85"
[Sun Jun 23 19:46:24 2013] source mask rpix=2.7, npix_max = 41, mask sum = 24, frac = 0.577
[Sun Jun 23 19:46:24 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 11.85"
[Sun Jun 23 19:55:27 2013] fullrun_mos1_xmm0089370501_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jun 23 19:55:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089370501_pi300-10000_cl_pass1_src5.csv
[Sun Jun 23 19:55:27 2013] fullrun_mos1_xmm0089370501_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jun 23 19:55:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089370501_pi300-10000_cl_pass1_src5.csv
[Sun Jun 23 19:55:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089370501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089370501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 19:55:27 2013] fullrun_mos1_xmm0089370501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jun 23 19:55:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089370501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Jun 23 19:55:27 2013] fullrun_mos1_xmm0089370501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jun 23 19:55:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0089370501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Jun 23 19:55:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0089370501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0089370501_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 20:03:17 2013] Spatial fit model total counts = 83.881800, observed total counts = 58.000000
[Sun Jun 23 20:03:17 2013] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 20:03:17 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 20:03:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 20:03:17 2013] Assessing source extent using major
[Sun Jun 23 20:03:17 2013] Source does appear to be extended
[Sun Jun 23 20:03:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 20:20:23 2013] XMMSAS src. selection expression = ellipse(18222.811584, 15421.061386, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 20:20:23 2013] Writing source region out to fullrun_mos1_xmm0089370501_pi300-10000_pass1_cl_src5_src.reg
[Sun Jun 23 20:20:23 2013] Extracting stamp from image fullrun_mos1_xmm0089370501_pi300-10000_cl_sm2.00.img.gz, (173, 140) - (248, 215)
[Sun Jun 23 20:20:23 2013] XMMSAS bgd. selection expression = annulus(18222.811584, 15421.061386, 1087.500000, 2175.000000, X, Y)
[Sun Jun 23 20:20:23 2013] Writing fullrun_mos1_xmm0089370501_pi300-10000_pass1_cl_src5.gif
[Sun Jun 23 20:21:09 2013] Mean detx,y = (8805.59, 6706.59) 
[Sun Jun 23 20:21:10 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 20:21:35 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 20:21:35 2013] Setting source spectrum file to fullrun_mos1_xmm0089370501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun 23 20:21:35 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0089370501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jun 23 20:22:45 2013] Not generating rmf since there are only 32 counts
[Sun Jun 23 20:22:45 2013] rmf not generated due to insufficient counts
[Sun Jun 23 20:29:04 2013] Updating aperture counts using extracted products
[Sun Jun 23 20:29:04 2013] Total counts from fullrun_mos1_xmm0089370501_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 46.00
[Sun Jun 23 20:29:04 2013] Total counts from fullrun_mos1_xmm0089370501_pi300-10000_pass1_cl_src5_bgd.pi.gz = 223.00
[Sun Jun 23 20:29:04 2013] Got source and background scale factors 948152.000000, 10299111.000000
[Sun Jun 23 20:29:04 2013] User source parameters:
  Position = (210.0, 177.8) = 5 55 54.17 22 0 31.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 25.5 +/- 7.8
  Background aperture counts = 20.5
  Rate = 0.001 +/- 0.0004

[Sun Jun 23 20:29:04 2013] Updating counts from extracted products
[Sun Jun 23 20:29:04 2013] Set source signif. to 25.47/4.53 = 5.62
[Sun Jun 23 20:29:05 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 20:29:05 2013] Using photon index=1.80, rate=0.00128, arf fullrun_mos1_xmm0089370501_pi300-10000_pass1_cl_src5.arf
[Sun Jun 23 20:29:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 20:29:05 2013] Updating source flux to 3.3e-14
[Sun Jun 23 20:29:06 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 20:29:07 2013] xmm0089370501/analysis//spectral/fullrun_mos1_xmm0089370501_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete