[Tue Jul 17 16:30:09 2012] Detection parameters:
  Position = (423.5, 313.9) = 5 30 16.30 -70 57 35.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.8 +/- 9.3
  Background counts = 19.1
  Rate = 0.003 +/- 0.0008

[Tue Jul 17 16:30:10 2012] Off-axis axis estimate = 9.14'
[Tue Jul 17 16:32:29 2012] Using EEF radius (= 11.00 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 16:32:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 17 16:32:29 2012] Initial guess for spatial extent in simple fitting = 11.00"
[Tue Jul 17 16:32:29 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.981
[Tue Jul 17 16:32:29 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 11.00"
[Tue Jul 17 17:38:37 2012] fullrun_pn_xmm0089210101_pi300-10000_cl_pass0_src6.ximg exists
[Tue Jul 17 17:38:37 2012] fullrun_pn_xmm0089210101_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Jul 17 17:38:37 2012] Fit fullrun_pn_xmm0089210101_pi300-10000_cl_pass0_src6 appears to have run properly
[Tue Jul 17 17:38:37 2012] fullrun_pn_xmm0089210101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Jul 17 17:38:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089210101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Jul 17 17:38:37 2012] fullrun_pn_xmm0089210101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Jul 17 17:38:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089210101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Jul 17 17:38:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0089210101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0089210101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 19:37:21 2012] Spatial fit model total counts = 133.941000, observed total counts = 125.000000
[Tue Jul 17 19:37:21 2012] Offset between fit and detection position for source 6 = 0.688097 pixels
[Tue Jul 17 19:37:21 2012] 131.882900 total counts/ 122.516000 bgd. counts: snr = 0.846252
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.688097 pixels
  Position = (423.9, 314.5) = 5 30 15.97 -70 57 33.9
  Extent = 3.0" x 2.7", rotation angle = 358
  Source counts = 9.4 +/- 11.5
  Background counts = 122.5
  Rate = 0.001 +/- 0.002
  Deleting source due to low Poisson probability