[Tue Jul 17 16:30:09 2012] Detection parameters:
  Position = (324.6, 267.3) = 5 31 44.17 -71 0 58.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.0 +/- 14.9
  Background counts = 33.1
  Rate = 0.01 +/- 0.002

[Tue Jul 17 16:30:10 2012] Off-axis axis estimate = 2.95'
[Tue Jul 17 16:32:29 2012] Using EEF radius (= 7.90 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 16:32:29 2012] Initial guess for spatial extent in simple fitting = 7.90"
[Tue Jul 17 16:32:29 2012] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.559
[Tue Jul 17 16:32:29 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 7.90"
[Tue Jul 17 17:38:37 2012] fullrun_pn_xmm0089210101_pi300-10000_cl_pass0_src16.ximg exists
[Tue Jul 17 17:38:37 2012] fullrun_pn_xmm0089210101_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue Jul 17 17:38:37 2012] Fit fullrun_pn_xmm0089210101_pi300-10000_cl_pass0_src16 appears to have run properly
[Tue Jul 17 17:38:37 2012] fullrun_pn_xmm0089210101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue Jul 17 17:38:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089210101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Jul 17 17:38:37 2012] fullrun_pn_xmm0089210101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Jul 17 17:38:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089210101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Jul 17 17:38:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0089210101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0089210101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 19:37:21 2012] Source 16 is offset by -7.087713 and 6.142841 pixels which is larger than
2 X fitted extent = 0.908267 x 0.908267, not incorporating fit results
[Tue Jul 17 19:37:21 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 19:37:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 19:37:21 2012] Assessing source extent using major
[Tue Jul 17 19:37:21 2012] Source does appear to be extended
[Tue Jul 17 19:37:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 19:37:35 2012] Using EEF radius (= 7.90 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 19:37:35 2012] Initial guess for spatial extent in simple fitting = 7.90"
[Tue Jul 17 19:37:35 2012] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.559
[Tue Jul 17 19:37:35 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 7.90"
[Tue Jul 17 20:22:11 2012] fullrun_pn_xmm0089210101_pi300-10000_cl_pass1_src12.ximg exists
[Tue Jul 17 20:22:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089210101_pi300-10000_cl_pass1_src12.csv
[Tue Jul 17 20:22:12 2012] fullrun_pn_xmm0089210101_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue Jul 17 20:22:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089210101_pi300-10000_cl_pass1_src12.csv
[Tue Jul 17 20:22:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0089210101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0089210101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 20:22:12 2012] fullrun_pn_xmm0089210101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue Jul 17 20:22:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089210101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Tue Jul 17 20:22:12 2012] fullrun_pn_xmm0089210101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Jul 17 20:22:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0089210101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Tue Jul 17 20:22:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0089210101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0089210101_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 22:04:04 2012] Spatial fit model total counts = 603.092000, observed total counts = 442.000000
[Tue Jul 17 22:04:04 2012] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 17 22:04:04 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 22:04:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 22:04:04 2012] Assessing source extent using major
[Tue Jul 17 22:04:04 2012] Source does appear to be extended
[Tue Jul 17 22:04:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 22:04:17 2012] XMMSAS src. selection expression = ellipse(28192.820953, 23210.496521, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 17 22:04:17 2012] Writing source region out to fullrun_pn_xmm0089210101_pi300-10000_pass1_cl_src16_src.reg
[Tue Jul 17 22:04:17 2012] Extracting stamp from image fullrun_pn_xmm0089210101_pi300-10000_cl_sm2.00.img.gz, (287, 230) - (362, 305)
[Tue Jul 17 22:04:17 2012] XMMSAS bgd. selection expression = annulus(28192.820953, 23210.496521, 1087.500000, 2175.000000, X, Y) && !ellipse(27095.893322, 24384.019640, 1160.400033, 1160.400033, 0.000000, X, Y) && !ellipse(26847.848800, 23700.700000, 1175.712034, 1175.712034, 0.000000, X, Y) && !ellipse(26921.346000, 24530.316000, 1154.008033, 1154.008033, 0.000000, X, Y) && !ellipse(28086.230000, 25336.042000, 1171.000034, 1171.000034, 0.000000, X, Y) && !ellipse(25937.639000, 23951.544800, 1345.496039, 1345.496039, 0.000000, X, Y) && !ellipse(28438.626221, 24007.562866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25988.307648, 23087.653625, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 17 22:04:17 2012] Writing fullrun_pn_xmm0089210101_pi300-10000_pass1_cl_src16.gif
[Tue Jul 17 22:10:07 2012] Mean detx,y = (1115.41, -1284.32) 
[Tue Jul 17 22:10:09 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 22:10:31 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 22:10:32 2012] Setting source spectrum file to fullrun_pn_xmm0089210101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Jul 17 22:10:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0089210101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue Jul 17 23:00:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 17 23:00:25 2012] rmf not generated due to insufficient counts
[Tue Jul 17 23:39:30 2012] Updating aperture counts using extracted products
[Tue Jul 17 23:39:30 2012] Error reading totcts from fullrun_pn_xmm0089210101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Jul 17 23:39:30 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 23:39:30 2012] Using photon index=1.80, rate=0.0122, arf fullrun_pn_xmm0089210101_pi300-10000_pass1_cl_src16.arf
[Tue Jul 17 23:39:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 23:39:30 2012] Updating source flux to 3.9e-14
[Tue Jul 17 23:40:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting