[Tue May 28 17:53:29 2013] Detection parameters:
  Position = (323.9, 229.8) = 13 46 32.73 -62 55 26.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3858.5 +/- 74.2
  Background counts = 49.7
  Rate = 0.2 +/- 0.003

[Tue May 28 17:53:29 2013] Off-axis axis estimate = 5.31'
[Tue May 28 18:56:49 2013] Using EEF radius (= 9.08 ")to estimate initial spatial extent for simple fitting
[Tue May 28 18:56:49 2013] Initial guess for spatial extent in simple fitting = 9.08"
[Tue May 28 18:56:49 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.120
[Tue May 28 18:56:49 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 9.08"
[Tue May 28 19:11:46 2013] fullrun_mos1_xmm0087940201_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 28 19:11:47 2013] fullrun_mos1_xmm0087940201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 28 19:11:47 2013] Fit fullrun_mos1_xmm0087940201_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue May 28 19:11:47 2013] fullrun_mos1_xmm0087940201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 28 19:11:47 2013] fullrun_mos1_xmm0087940201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 28 19:11:47 2013] Fit fullrun_mos1_xmm0087940201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May 28 19:30:35 2013] Spatial fit model total counts = 3880.320000, observed total counts = 3853.000000
[Tue May 28 19:30:35 2013] Offset between fit and detection position for source 12 = 0.098097 pixels
[Tue May 28 19:30:35 2013] 3881.015000 total counts/ 998.415000 bgd. counts: snr = 91.228143
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.098097 pixels
  Position = (323.9, 229.8) = 13 46 32.77 -62 55 27.0
  Extent = 7.1 (6.8-7.5)" x 5.2 (4.9-5.4)", rotation angle = 360 (355-4) degrees
  Source counts = 2882.6 +/- 62.3
  Background counts = 998.4
  Rate = 0.08 +/- 0.002
[Tue May 28 19:30:35 2013] Vigneting correction estimate = 1.000000
[Tue May 28 19:30:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 19:30:35 2013] Assessing source extent using major axis lower bound
[Tue May 28 19:30:35 2013] Source does appear to be extended
[Tue May 28 19:30:35 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.27
[Tue May 28 20:04:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 28 20:04:12 2013] Initial guess for spatial extent in simple fitting = 6.14"
[Tue May 28 20:04:12 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.094
[Tue May 28 20:04:12 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 6.14"
[Tue May 28 20:25:17 2013] fullrun_mos1_xmm0087940201_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 28 20:25:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0087940201_pi300-10000_cl_pass1_src1.csv
[Tue May 28 20:25:17 2013] fullrun_mos1_xmm0087940201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 28 20:25:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0087940201_pi300-10000_cl_pass1_src1.csv
[Tue May 28 20:25:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0087940201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0087940201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 20:25:17 2013] fullrun_mos1_xmm0087940201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 28 20:25:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0087940201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May 28 20:25:17 2013] fullrun_mos1_xmm0087940201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 28 20:25:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0087940201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May 28 20:25:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0087940201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0087940201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 20:44:29 2013] Spatial fit model total counts = 3355.330000, observed total counts = 3779.000000
[Tue May 28 20:44:29 2013] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 28 20:44:29 2013] Vigneting correction estimate = 1.000000
[Tue May 28 20:44:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 20:44:29 2013] Assessing source extent using major axis lower bound
[Tue May 28 20:44:29 2013] Source does appear to be extended
[Tue May 28 20:44:29 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.27
[Tue May 28 21:10:58 2013] Counts = 2882.600000, rescaling region sizes by 2.000000
[Tue May 28 21:10:58 2013] XMMSAS src. selection expression = ellipse(28126.919600, 19940.114200, 855.885625, 618.567618, 359.671050, X, Y)
[Tue May 28 21:10:58 2013] Writing source region out to fullrun_mos1_xmm0087940201_pi300-10000_pass1_cl_src12_src.reg
[Tue May 28 21:10:58 2013] Extracting stamp from image fullrun_mos1_xmm0087940201_pi300-10000_cl_sm2.00.img.gz, (275, 181) - (373, 279)
[Tue May 28 21:10:58 2013] XMMSAS bgd. selection expression = annulus(28126.919600, 19940.114200, 2852.952082, 5705.904164, X, Y) && !ellipse(31394.038800, 23636.751200, 263.778408, 263.778408, 0.000000, X, Y)
[Tue May 28 21:10:58 2013] Writing fullrun_mos1_xmm0087940201_pi300-10000_pass1_cl_src12.gif
[Tue May 28 21:11:02 2013] Mean detx,y = (-7360.07, -3638.91) 
[Tue May 28 21:11:03 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 21:12:08 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 21:12:08 2013] Setting source spectrum file to fullrun_mos1_xmm0087940201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue May 28 21:12:08 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0087940201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Tue May 28 21:46:22 2013] Updating aperture counts using extracted products
[Tue May 28 21:46:22 2013] Total counts from fullrun_mos1_xmm0087940201_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 3709.00
[Tue May 28 21:46:23 2013] Total counts from fullrun_mos1_xmm0087940201_pi300-10000_pass1_cl_src12_bgd.pi.gz = 15001.00
[Tue May 28 21:46:23 2013] Got source and background scale factors 1451712.000000, 72770877.000000
[Tue May 28 21:46:23 2013] User source parameters:
  Position = (323.9, 229.8) = 13 46 32.77 -62 55 27.0
  Extent = 7.1 (6.8-7.5)" x 5.2 (4.9-5.4)", rotation angle = 360 (355-4) degrees
  Source aperture counts = 3409.7 +/- 61.9
  Background aperture counts = 299.3
  Rate = 0.09 +/- 0.002

[Tue May 28 21:46:24 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 28 21:46:24 2013] Using photon index=1.80, rate=0.0759, arf fullrun_mos1_xmm0087940201_pi300-10000_pass1_cl_src12.arf
[Tue May 28 21:46:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 28 21:46:24 2013] Updating source flux to 2.2e-12
[Tue May 28 21:46:26 2013] Flag p found in src. 12 procflags, skipping spectral fitting
[Tue May 28 21:46:28 2013] xmm0087940201/analysis//spectral/fullrun_mos1_xmm0087940201_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete