[Fri Jul 27 11:41:57 2012] Detection parameters:
  Position = (400.7, 156.9) = 21 29 34.19 11 59 1.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.6 +/- 10.5
  Background counts = 6.8
  Rate = 0.005 +/- 0.0008

[Fri Jul 27 11:41:57 2012] Off-axis axis estimate = 12.66'
[Fri Jul 27 11:54:51 2012] Using EEF radius (= 12.76 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 11:54:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 11:54:51 2012] Initial guess for spatial extent in simple fitting = 12.76"
[Fri Jul 27 11:54:51 2012] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.891
[Fri Jul 27 11:54:51 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.76"
[Fri Jul 27 12:10:07 2012] fullrun_mos2_xmm0087350801_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jul 27 12:10:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0087350801_pi300-10000_cl_pass0_src3.csv
[Fri Jul 27 12:10:07 2012] fullrun_mos2_xmm0087350801_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jul 27 12:10:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0087350801_pi300-10000_cl_pass0_src3.csv
[Fri Jul 27 12:10:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0087350801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0087350801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 12:10:07 2012] fullrun_mos2_xmm0087350801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jul 27 12:10:07 2012] fullrun_mos2_xmm0087350801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jul 27 12:10:07 2012] Fit fullrun_mos2_xmm0087350801_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jul 27 12:10:13 2012] Spatial fit model total counts = 119.059000, observed total counts = 119.000000
[Fri Jul 27 12:10:13 2012] Offset between fit and detection position for source 7 = 0.395903 pixels
[Fri Jul 27 12:10:13 2012] 119.672100 total counts/ 80.508800 bgd. counts: snr = 4.364732
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.395903 pixels
  Position = (400.4, 156.6) = 21 29 34.27 11 59 1.1
  Extent = 6.0 (4.5-7.9)", rotation angle = 0
  Source counts = 39.2 +/- 10.9
  Background counts = 80.5
  Rate = 0.003 +/- 0.0008
[Fri Jul 27 12:10:13 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 12:10:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 12:10:13 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 12:10:13 2012] Source does appear to be extended
[Fri Jul 27 12:10:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 12:27:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 12:27:12 2012] Initial guess for spatial extent in simple fitting = 5.97"
[Fri Jul 27 12:27:12 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.856
[Fri Jul 27 12:27:12 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.97"
[Fri Jul 27 12:43:22 2012] fullrun_mos2_xmm0087350801_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jul 27 12:43:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0087350801_pi300-10000_cl_pass1_src3.csv
[Fri Jul 27 12:43:22 2012] fullrun_mos2_xmm0087350801_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jul 27 12:43:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0087350801_pi300-10000_cl_pass1_src3.csv
[Fri Jul 27 12:43:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0087350801_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0087350801_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 12:43:22 2012] fullrun_mos2_xmm0087350801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul 27 12:43:22 2012] fullrun_mos2_xmm0087350801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul 27 12:43:22 2012] Fit fullrun_mos2_xmm0087350801_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jul 27 12:43:29 2012] Spatial fit model total counts = 108.172000, observed total counts = 108.000000
[Fri Jul 27 12:43:29 2012] Offset between fit and detection position for source 7 = 0.011985 pixels
[Fri Jul 27 12:43:29 2012] 109.029000 total counts/ 71.518400 bgd. counts: snr = 4.435526
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.011985 pixels
  Position = (400.4, 156.7) = 21 29 34.27 11 59 1.2
  Extent = 5.8 (4.3-7.6)", rotation angle = 0
  Source counts = 37.5 +/- 10.4
  Background counts = 71.5
  Rate = 0.003 +/- 0.0008
[Fri Jul 27 12:43:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 12:43:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 12:43:29 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 12:43:29 2012] Source does appear to be extended
[Fri Jul 27 12:43:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 12:47:14 2012] XMMSAS src. selection expression = ellipse(34787.080400, 13580.517600, 346.190410, 346.190410, 0.000000, X, Y)
[Fri Jul 27 12:47:14 2012] Writing source region out to fullrun_mos2_xmm0087350801_pi300-10000_pass1_cl_src7_src.reg
[Fri Jul 27 12:47:14 2012] Extracting stamp from image fullrun_mos2_xmm0087350801_pi300-10000_cl_sm2.00.img.gz, (381, 137) - (420, 177)
[Fri Jul 27 12:47:14 2012] XMMSAS bgd. selection expression = annulus(34787.080400, 13580.517600, 576.984017, 1153.968033, X, Y)
[Fri Jul 27 12:47:14 2012] Writing fullrun_mos2_xmm0087350801_pi300-10000_pass1_cl_src7.gif
[Fri Jul 27 12:48:13 2012] Mean detx,y = (-12235.06, -8743.04) 
[Fri Jul 27 12:48:15 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 12:48:28 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 12:48:28 2012] Setting source spectrum file to fullrun_mos2_xmm0087350801_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jul 27 12:48:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0087350801_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Jul 27 12:50:34 2012] Not generating rmf since there are only 37 counts
[Fri Jul 27 12:50:34 2012] rmf not generated due to insufficient counts
[Fri Jul 27 12:51:41 2012] Updating aperture counts using extracted products
[Fri Jul 27 12:51:41 2012] Error reading totcts from fullrun_mos2_xmm0087350801_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jul 27 12:51:42 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 12:51:42 2012] Using photon index=1.80, rate=0.00287, arf fullrun_mos2_xmm0087350801_pi300-10000_pass1_cl_src7.arf
[Fri Jul 27 12:51:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 12:51:42 2012] Updating source flux to 9.2e-14
[Fri Jul 27 12:51:44 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jul 27 12:51:45 2012] xmm0087350801/analysis//spectral/fullrun_mos2_xmm0087350801_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete