[Fri Jul 27 11:41:29 2012] Detection parameters:
  Position = (323.9, 217.0) = 21 29 56.95 12 3 24.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.3 +/- 8.0
  Background counts = 11.9
  Rate = 0.005 +/- 0.001

[Fri Jul 27 11:41:29 2012] Off-axis axis estimate = 6.19'
[Fri Jul 27 11:42:35 2012] Using EEF radius (= 9.52 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 11:42:35 2012] Initial guess for spatial extent in simple fitting = 9.52"
[Fri Jul 27 11:42:35 2012] source mask rpix=2.2, npix_max = 28, mask sum = 32, frac = 1.106
[Fri Jul 27 11:42:35 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.52"
[Fri Jul 27 11:54:51 2012] fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_src5.ximg exists
[Fri Jul 27 11:54:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_src5.csv
[Fri Jul 27 11:54:51 2012] fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Jul 27 11:54:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_src5.csv
[Fri Jul 27 11:54:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 11:54:51 2012] fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Jul 27 11:54:51 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Jul 27 11:54:51 2012] fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jul 27 11:54:51 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Jul 27 11:54:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 12:10:10 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.072163 pixels away
[Fri Jul 27 12:10:10 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 12:10:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 12:10:10 2012] Assessing source extent using major
[Fri Jul 27 12:10:10 2012] Source does appear to be extended
[Fri Jul 27 12:10:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 12:10:18 2012] Using EEF radius (= 9.52 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 12:10:18 2012] Initial guess for spatial extent in simple fitting = 9.52"
[Fri Jul 27 12:10:18 2012] source mask rpix=2.2, npix_max = 28, mask sum = 32, frac = 1.106
[Fri Jul 27 12:10:18 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.52"
[Fri Jul 27 12:27:12 2012] fullrun_mos1_xmm0087350801_pi300-10000_cl_pass1_src5.ximg exists
[Fri Jul 27 12:27:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0087350801_pi300-10000_cl_pass1_src5.csv
[Fri Jul 27 12:27:12 2012] fullrun_mos1_xmm0087350801_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Jul 27 12:27:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0087350801_pi300-10000_cl_pass1_src5.csv
[Fri Jul 27 12:27:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0087350801_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0087350801_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 12:27:12 2012] fullrun_mos1_xmm0087350801_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Jul 27 12:27:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0087350801_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Jul 27 12:27:12 2012] fullrun_mos1_xmm0087350801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jul 27 12:27:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0087350801_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Jul 27 12:27:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0087350801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0087350801_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 12:43:26 2012] Spatial fit model total counts = -421.631000, observed total counts = 108.000000
[Fri Jul 27 12:43:26 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 27 12:43:26 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 12:43:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 12:43:26 2012] Assessing source extent using major
[Fri Jul 27 12:43:26 2012] Source does appear to be extended
[Fri Jul 27 12:43:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 12:43:35 2012] XMMSAS src. selection expression = ellipse(28130.313599, 18826.751099, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 27 12:43:35 2012] Writing source region out to fullrun_mos1_xmm0087350801_pi300-10000_pass1_cl_src5_src.reg
[Fri Jul 27 12:43:35 2012] Extracting stamp from image fullrun_mos1_xmm0087350801_pi300-10000_cl_sm2.00.img.gz, (286, 179) - (361, 254)
[Fri Jul 27 12:43:35 2012] XMMSAS bgd. selection expression = annulus(28130.313599, 18826.751099, 1087.500000, 2175.000000, X, Y) && !ellipse(25986.376800, 17234.130600, 312.075883, 312.075883, 0.000000, X, Y)
[Fri Jul 27 12:43:35 2012] Writing fullrun_mos1_xmm0087350801_pi300-10000_pass1_cl_src5.gif
[Fri Jul 27 12:45:02 2012] Mean detx,y = (-6971.35, 3679.58) 
[Fri Jul 27 12:45:04 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 12:45:30 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 12:45:30 2012] Setting source spectrum file to fullrun_mos1_xmm0087350801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jul 27 12:45:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0087350801_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jul 27 12:46:42 2012] Not generating rmf since there are only 37 counts
[Fri Jul 27 12:46:42 2012] rmf not generated due to insufficient counts
[Fri Jul 27 12:51:41 2012] Updating aperture counts using extracted products
[Fri Jul 27 12:51:41 2012] Error reading totcts from fullrun_mos1_xmm0087350801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jul 27 12:51:41 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 12:51:41 2012] Using photon index=1.80, rate=0.00455, arf fullrun_mos1_xmm0087350801_pi300-10000_pass1_cl_src5.arf
[Fri Jul 27 12:51:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 12:51:41 2012] Updating source flux to 7.8e-14
[Fri Jul 27 12:51:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jul 27 12:51:44 2012] xmm0087350801/analysis//spectral/fullrun_mos1_xmm0087350801_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete