[Fri Jul 27 11:41:29 2012] Detection parameters:
  Position = (376.9, 248.7) = 21 29 41.23 12 5 42.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.8 +/- 13.2
  Background counts = 13.0
  Rate = 0.01 +/- 0.002

[Fri Jul 27 11:41:29 2012] Off-axis axis estimate = 6.74'
[Fri Jul 27 11:42:35 2012] Using EEF radius (= 9.80 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 11:42:35 2012] Initial guess for spatial extent in simple fitting = 9.80"
[Fri Jul 27 11:42:35 2012] source mask rpix=2.3, npix_max = 30, mask sum = 19, frac = 0.627
[Fri Jul 27 11:42:35 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.80"
[Fri Jul 27 11:54:51 2012] fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 27 11:54:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 11:54:51 2012] fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 27 11:54:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 11:54:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 11:54:51 2012] fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 27 11:54:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jul 27 11:54:51 2012] fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 27 11:54:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jul 27 11:54:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0087350801_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 12:10:10 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.248142 pixels away
[Fri Jul 27 12:10:10 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 12:10:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 12:10:10 2012] Assessing source extent using major
[Fri Jul 27 12:10:10 2012] Source does appear to be extended
[Fri Jul 27 12:10:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 12:10:18 2012] Using EEF radius (= 9.80 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 12:10:18 2012] Initial guess for spatial extent in simple fitting = 9.80"
[Fri Jul 27 12:10:18 2012] source mask rpix=2.3, npix_max = 30, mask sum = 19, frac = 0.627
[Fri Jul 27 12:10:18 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.80"
[Fri Jul 27 12:27:12 2012] fullrun_mos1_xmm0087350801_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 27 12:27:12 2012] fullrun_mos1_xmm0087350801_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 27 12:27:12 2012] Fit fullrun_mos1_xmm0087350801_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Jul 27 12:27:12 2012] fullrun_mos1_xmm0087350801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 27 12:27:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0087350801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jul 27 12:27:12 2012] fullrun_mos1_xmm0087350801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 27 12:27:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0087350801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jul 27 12:27:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0087350801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0087350801_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 12:43:26 2012] Source 1 is offset by 6.377050 and -5.836538 pixels which is larger than
2 X fitted extent = 0.686345 x 0.686345, not incorporating fit results
[Fri Jul 27 12:43:26 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 248.576576 pixels away
[Fri Jul 27 12:43:26 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 12:43:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 12:43:26 2012] Assessing source extent using major
[Fri Jul 27 12:43:26 2012] Source does appear to be extended
[Fri Jul 27 12:43:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 12:43:34 2012] XMMSAS src. selection expression = ellipse(32740.607361, 21584.417191, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 27 12:43:34 2012] Writing source region out to fullrun_mos1_xmm0087350801_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul 27 12:43:34 2012] Extracting stamp from image fullrun_mos1_xmm0087350801_pi300-10000_cl_sm2.00.img.gz, (339, 211) - (414, 286)
[Fri Jul 27 12:43:34 2012] XMMSAS bgd. selection expression = annulus(32740.607361, 21584.417191, 1087.500000, 2175.000000, X, Y)
[Fri Jul 27 12:43:34 2012] Writing fullrun_mos1_xmm0087350801_pi300-10000_pass1_cl_src1.gif
[Fri Jul 27 12:43:38 2012] Mean detx,y = (-2273.57, 6774.62) 
[Fri Jul 27 12:43:40 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 12:44:15 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 12:44:15 2012] Setting source spectrum file to fullrun_mos1_xmm0087350801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 27 12:44:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0087350801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul 27 12:46:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 27 12:46:03 2012] rmf not generated due to insufficient counts
[Fri Jul 27 12:51:41 2012] Updating aperture counts using extracted products
[Fri Jul 27 12:51:41 2012] Error reading totcts from fullrun_mos1_xmm0087350801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 27 12:51:41 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 12:51:41 2012] Using photon index=1.80, rate=0.0142, arf fullrun_mos1_xmm0087350801_pi300-10000_pass1_cl_src1.arf
[Fri Jul 27 12:51:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 12:51:41 2012] Updating source flux to 2.7e-13
[Fri Jul 27 12:51:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jul 27 12:51:44 2012] xmm0087350801/analysis//spectral/fullrun_mos1_xmm0087350801_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete