[Sun Feb 19 10:56:00 2012] Detection parameters:
  Position = (401.2, 285.2) = 21 29 33.44 12 8 4.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.2 +/- 13.8
  Background counts = 18.3
  Rate = 0.007 +/- 0.001

[Sun Feb 19 10:56:00 2012] Off-axis axis estimate = 7.51'
[Sun Feb 19 11:05:53 2012] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 11:05:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 19 11:05:53 2012] Initial guess for spatial extent in simple fitting = 10.18"
[Sun Feb 19 11:05:53 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.115
[Sun Feb 19 11:05:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.18"
[Sun Feb 19 11:17:39 2012] fullrun_mos2_xmm0087350601_pi300-10000_cl_pass0_src1.ximg exists
[Sun Feb 19 11:17:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0087350601_pi300-10000_cl_pass0_src1.csv
[Sun Feb 19 11:17:39 2012] fullrun_mos2_xmm0087350601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Feb 19 11:17:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0087350601_pi300-10000_cl_pass0_src1.csv
[Sun Feb 19 11:17:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0087350601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0087350601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 11:17:39 2012] fullrun_mos2_xmm0087350601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 19 11:17:39 2012] fullrun_mos2_xmm0087350601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 19 11:17:39 2012] Fit fullrun_mos2_xmm0087350601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 19 11:17:45 2012] Spatial fit model total counts = 302.000000, observed total counts = 302.000000
[Sun Feb 19 11:17:45 2012] Offset between fit and detection position for source 4 = 0.029478 pixels
[Sun Feb 19 11:17:45 2012] 300.509700 total counts/ 233.084000 bgd. counts: snr = 4.416408
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.029478 pixels
  Position = (401.2, 285.2) = 21 29 33.43 12 8 5.3
  Extent = 5.0 (4.0-6.1)", rotation angle = 0
  Source counts = 67.4 +/- 17.3
  Background counts = 233.1
  Rate = 0.003 +/- 0.0009
[Sun Feb 19 11:17:45 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 11:17:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 11:17:45 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 11:17:45 2012] Source does appear to be extended
[Sun Feb 19 11:17:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 11:29:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 19 11:29:09 2012] Initial guess for spatial extent in simple fitting = 5.00"
[Sun Feb 19 11:29:09 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.827
[Sun Feb 19 11:29:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.00"
[Sun Feb 19 11:39:33 2012] fullrun_mos2_xmm0087350601_pi300-10000_cl_pass1_src1.ximg exists
[Sun Feb 19 11:39:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0087350601_pi300-10000_cl_pass1_src1.csv
[Sun Feb 19 11:39:33 2012] fullrun_mos2_xmm0087350601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Feb 19 11:39:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0087350601_pi300-10000_cl_pass1_src1.csv
[Sun Feb 19 11:39:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0087350601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0087350601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 11:39:33 2012] fullrun_mos2_xmm0087350601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 19 11:39:34 2012] fullrun_mos2_xmm0087350601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 19 11:39:34 2012] Fit fullrun_mos2_xmm0087350601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Feb 19 11:39:39 2012] Spatial fit model total counts = 234.000000, observed total counts = 234.000000
[Sun Feb 19 11:39:39 2012] Offset between fit and detection position for source 4 = 0.015729 pixels
[Sun Feb 19 11:39:39 2012] 235.168200 total counts/ 167.927000 bgd. counts: snr = 5.188899
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.015729 pixels
  Position = (401.2, 285.2) = 21 29 33.44 12 8 5.2
  Extent = 5.0 (4.0-6.1)", rotation angle = 0
  Source counts = 67.2 +/- 15.3
  Background counts = 167.9
  Rate = 0.003 +/- 0.0008
[Sun Feb 19 11:39:39 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 11:39:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 11:39:39 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 11:39:39 2012] Source does appear to be extended
[Sun Feb 19 11:39:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 11:43:38 2012] XMMSAS src. selection expression = ellipse(34856.046000, 24760.520600, 299.454009, 299.454009, 0.000000, X, Y)
[Sun Feb 19 11:43:38 2012] Writing source region out to fullrun_mos2_xmm0087350601_pi300-10000_pass1_cl_src4_src.reg
[Sun Feb 19 11:43:38 2012] Extracting stamp from image fullrun_mos2_xmm0087350601_pi300-10000_cl_sm2.00.img.gz, (384, 268) - (418, 302)
[Sun Feb 19 11:43:38 2012] XMMSAS bgd. selection expression = annulus(34856.046000, 24760.520600, 499.090014, 998.180029, X, Y) && !ellipse(36722.216736, 25558.514160, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 19 11:43:38 2012] Writing fullrun_mos2_xmm0087350601_pi300-10000_pass1_cl_src4.gif
[Sun Feb 19 11:43:42 2012] Mean detx,y = (-7718.90, -288.55) 
[Sun Feb 19 11:43:44 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 19 11:43:55 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 19 11:43:56 2012] Setting source spectrum file to fullrun_mos2_xmm0087350601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Feb 19 11:43:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0087350601_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Feb 19 11:45:19 2012] Not generating rmf since there are only 67 counts
[Sun Feb 19 11:45:19 2012] rmf not generated due to insufficient counts
[Sun Feb 19 11:46:27 2012] Updating aperture counts using extracted products
[Sun Feb 19 11:46:27 2012] Error reading totcts from fullrun_mos2_xmm0087350601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Feb 19 11:46:27 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 19 11:46:27 2012] Using photon index=1.80, rate=0.00349, arf fullrun_mos2_xmm0087350601_pi300-10000_pass1_cl_src4.arf
[Sun Feb 19 11:46:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 19 11:46:27 2012] Updating source flux to 6.2e-14
[Sun Feb 19 11:46:29 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 19 11:46:30 2012] xmm0087350601/analysis//spectral/fullrun_mos2_xmm0087350601_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete