[Sun Feb 19 10:55:36 2012] Detection parameters:
  Position = (473.1, 282.2) = 21 29 12.10 12 7 51.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.3 +/- 13.5
  Background counts = 13.7
  Rate = 0.005 +/- 0.0007

[Sun Feb 19 10:55:36 2012] Off-axis axis estimate = 12.72'
[Sun Feb 19 10:56:50 2012] Using EEF radius (= 12.79 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 10:56:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 19 10:56:50 2012] Initial guess for spatial extent in simple fitting = 12.79"
[Sun Feb 19 10:56:50 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.035
[Sun Feb 19 10:56:50 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.79"
[Sun Feb 19 11:05:53 2012] fullrun_mos1_xmm0087350601_pi300-10000_cl_pass0_src1.ximg exists
[Sun Feb 19 11:05:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0087350601_pi300-10000_cl_pass0_src1.csv
[Sun Feb 19 11:05:53 2012] fullrun_mos1_xmm0087350601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Feb 19 11:05:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0087350601_pi300-10000_cl_pass0_src1.csv
[Sun Feb 19 11:05:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0087350601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0087350601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 11:05:53 2012] fullrun_mos1_xmm0087350601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 19 11:05:53 2012] fullrun_mos1_xmm0087350601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 19 11:05:53 2012] Fit fullrun_mos1_xmm0087350601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 19 11:17:42 2012] Spatial fit model total counts = 290.693000, observed total counts = 291.000000
[Sun Feb 19 11:17:42 2012] Offset between fit and detection position for source 1 = 0.390222 pixels
[Sun Feb 19 11:17:42 2012] 292.673200 total counts/ 233.044000 bgd. counts: snr = 3.906070
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.390222 pixels
  Position = (472.8, 282.5) = 21 29 12.19 12 7 53.4
  Extent = 6.6 (4.7-8.6)", rotation angle = 0
  Source counts = 59.6 +/- 17.1
  Background counts = 233.0
  Rate = 0.003 +/- 0.0009
[Sun Feb 19 11:17:42 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 11:17:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 11:17:42 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 11:17:42 2012] Source does appear to be extended
[Sun Feb 19 11:17:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 11:17:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 19 11:17:50 2012] Initial guess for spatial extent in simple fitting = 6.62"
[Sun Feb 19 11:17:50 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.979
[Sun Feb 19 11:17:50 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.62"
[Sun Feb 19 11:29:09 2012] fullrun_mos1_xmm0087350601_pi300-10000_cl_pass1_src1.ximg exists
[Sun Feb 19 11:29:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0087350601_pi300-10000_cl_pass1_src1.csv
[Sun Feb 19 11:29:09 2012] fullrun_mos1_xmm0087350601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Feb 19 11:29:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0087350601_pi300-10000_cl_pass1_src1.csv
[Sun Feb 19 11:29:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0087350601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0087350601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 11:29:09 2012] fullrun_mos1_xmm0087350601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 19 11:29:09 2012] fullrun_mos1_xmm0087350601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 19 11:29:09 2012] Fit fullrun_mos1_xmm0087350601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Feb 19 11:39:37 2012] Spatial fit model total counts = 176.405000, observed total counts = 177.000000
[Sun Feb 19 11:39:37 2012] Offset between fit and detection position for source 1 = 0.044968 pixels
[Sun Feb 19 11:39:37 2012] 175.655500 total counts/ 117.128000 bgd. counts: snr = 5.407912
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.044968 pixels
  Position = (472.9, 282.5) = 21 29 12.18 12 7 53.4
  Extent = 6.5 (4.4-8.9)", rotation angle = 0
  Source counts = 58.5 +/- 13.3
  Background counts = 117.1
  Rate = 0.003 +/- 0.0007
[Sun Feb 19 11:39:37 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 11:39:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 11:39:37 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 11:39:37 2012] Source does appear to be extended
[Sun Feb 19 11:39:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 11:39:44 2012] XMMSAS src. selection expression = ellipse(41090.646200, 24527.278800, 390.326411, 390.326411, 0.000000, X, Y)
[Sun Feb 19 11:39:44 2012] Writing source region out to fullrun_mos1_xmm0087350601_pi300-10000_pass1_cl_src1_src.reg
[Sun Feb 19 11:39:44 2012] Extracting stamp from image fullrun_mos1_xmm0087350601_pi300-10000_cl_sm2.00.img.gz, (450, 260) - (495, 305)
[Sun Feb 19 11:39:44 2012] XMMSAS bgd. selection expression = annulus(41090.646200, 24527.278800, 650.544019, 1301.088037, X, Y)
[Sun Feb 19 11:39:44 2012] Writing fullrun_mos1_xmm0087350601_pi300-10000_pass1_cl_src1.gif
[Sun Feb 19 11:39:47 2012] Mean detx,y = (1356.81, 13630.47) 
[Sun Feb 19 11:39:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 19 11:40:01 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 19 11:40:01 2012] Setting source spectrum file to fullrun_mos1_xmm0087350601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Feb 19 11:40:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0087350601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Feb 19 11:42:20 2012] Not generating rmf since there are only 58 counts
[Sun Feb 19 11:42:20 2012] rmf not generated due to insufficient counts
[Sun Feb 19 11:46:26 2012] Updating aperture counts using extracted products
[Sun Feb 19 11:46:26 2012] Error reading totcts from fullrun_mos1_xmm0087350601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Feb 19 11:46:27 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 19 11:46:27 2012] Using photon index=1.80, rate=0.00304, arf fullrun_mos1_xmm0087350601_pi300-10000_pass1_cl_src1.arf
[Sun Feb 19 11:46:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 19 11:46:27 2012] Updating source flux to 6.3e-14
[Sun Feb 19 11:46:28 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 19 11:46:29 2012] xmm0087350601/analysis//spectral/fullrun_mos1_xmm0087350601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete