[Sun May 20 10:41:31 2012] Detection parameters:
  Position = (301.0, 293.2) = 13 47 31.24 -32 53 46.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 844.0 +/- 60.8
  Background counts = 1109.9
  Rate = 0.03 +/- 0.002

[Sun May 20 10:41:31 2012] Off-axis axis estimate = 0.42'
[Sun May 20 10:50:44 2012] Using EEF radius (= 6.64 ")to estimate initial spatial extent for simple fitting
[Sun May 20 10:50:44 2012] Initial guess for spatial extent in simple fitting = 6.64"
[Sun May 20 10:50:44 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.974
[Sun May 20 10:50:44 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 6.64"
[Sun May 20 17:24:48 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src61.ximg exists
[Sun May 20 17:24:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src61.csv
[Sun May 20 17:24:48 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src61_1.ximg exists
[Sun May 20 17:24:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src61.csv
[Sun May 20 17:24:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 17:24:51 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Sun May 20 17:24:51 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Sun May 20 17:24:51 2012] Fit fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Mon May 21 01:02:28 2012] Source 71 is offset by 0.616813 and -6.953872 pixels which is larger than
2 X fitted extent = 6.106529 x 6.106529, not incorporating fit results
[Mon May 21 01:02:28 2012] Vigneting correction estimate = 1.000000
[Mon May 21 01:02:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 01:02:28 2012] Assessing source extent using major
[Mon May 21 01:02:28 2012] Source does appear to be extended
[Mon May 21 01:02:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 01:03:16 2012] Using EEF radius (= 6.64 ")to estimate initial spatial extent for simple fitting
[Mon May 21 01:03:16 2012] Initial guess for spatial extent in simple fitting = 6.64"
[Mon May 21 01:03:16 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.974
[Mon May 21 01:03:16 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 6.64"
[Mon May 21 04:51:06 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src38.ximg exists
[Mon May 21 04:51:06 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src38_1.ximg exists
[Mon May 21 04:51:06 2012] Fit fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src38 appears to have run properly
[Mon May 21 04:51:07 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Mon May 21 04:51:07 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Mon May 21 04:51:07 2012] Fit fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src38 appears to have run properly
[Mon May 21 11:53:22 2012] Source 71 is offset by 2.295921 and -6.953872 pixels which is larger than
2 X fitted extent = 3.798750 x 3.798750, not incorporating fit results
[Mon May 21 11:53:22 2012] Vigneting correction estimate = 1.000000
[Mon May 21 11:53:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 11:53:22 2012] Assessing source extent using major
[Mon May 21 11:53:22 2012] Source does appear to be extended
[Mon May 21 11:53:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 11:54:14 2012] XMMSAS src. selection expression = ellipse(26135.205109, 25455.783112, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 21 11:54:14 2012] Writing source region out to fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src71_src.reg
[Mon May 21 11:54:14 2012] Extracting stamp from image fullrun_pn_xmm0086950201_pi300-10000_cl_sm2.00.img.gz, (263, 256) - (338, 331)
[Mon May 21 11:54:14 2012] XMMSAS bgd. selection expression = annulus(26135.205109, 25455.783112, 1087.500000, 2175.000000, X, Y) && !ellipse(26772.202000, 27730.468000, 6964.176200, 6964.176200, 0.000000, X, Y) && !ellipse(24002.135986, 27248.926178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24159.069458, 26798.911987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24522.535004, 26125.633728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25632.965400, 26367.617200, 351.376810, 351.376810, 0.000000, X, Y) && !ellipse(29150.309479, 26658.107819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24638.294281, 25592.057800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27764.185800, 24971.264000, 1159.936033, 1159.936033, 0.000000, X, Y) && !ellipse(28814.981934, 24936.100952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28460.710754, 24291.887299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25978.247742, 24063.005188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26674.286200, 24448.940000, 1117.120032, 1117.120032, 0.000000, X, Y)
[Mon May 21 11:54:14 2012] Writing fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src71.gif
[Mon May 21 13:05:17 2012] Mean detx,y = (-1007.45, 1955.74) 
[Mon May 21 13:05:21 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 13:06:00 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 13:06:01 2012] Setting source spectrum file to fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Mon May 21 13:06:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Wed May 23 04:59:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 23 04:59:20 2012] rmf not generated due to insufficient counts
[Wed May 23 12:06:37 2012] Updating aperture counts using extracted products
[Wed May 23 12:06:37 2012] Error reading totcts from fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Wed May 23 12:06:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 12:06:39 2012] Using photon index=1.80, rate=0.0341, arf fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src71.arf
[Wed May 23 12:06:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 12:06:40 2012] Updating source flux to 1e-13
[Wed May 23 12:20:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting