[Sun May 20 10:41:30 2012] Detection parameters:
  Position = (320.2, 291.2) = 13 47 24.58 -32 53 55.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 777.9 +/- 60.1
  Background counts = 1171.2
  Rate = 0.03 +/- 0.002

[Sun May 20 10:41:31 2012] Off-axis axis estimate = 1.67'
[Sun May 20 10:50:44 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sun May 20 10:50:44 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Sun May 20 10:50:44 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Sun May 20 10:50:44 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 7.26"
[Sun May 20 17:24:48 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src54.ximg exists
[Sun May 20 17:24:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src54.csv
[Sun May 20 17:24:48 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src54_1.ximg exists
[Sun May 20 17:24:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src54.csv
[Sun May 20 17:24:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 17:24:51 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Sun May 20 17:24:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src54.csv
[Sun May 20 17:24:51 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Sun May 20 17:24:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src54.csv
[Sun May 20 17:24:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 01:02:28 2012] Warning, spatial fit 54 centroid is now closest to src. 70
[Mon May 21 01:02:28 2012] Source 64 is offset by -2.009198 and -7.716410 pixels which is larger than
2 X fitted extent = 4.465577 x 4.465577, not incorporating fit results
[Mon May 21 01:02:28 2012] Vigneting correction estimate = 1.000000
[Mon May 21 01:02:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 01:02:28 2012] Assessing source extent using major
[Mon May 21 01:02:28 2012] Source does appear to be extended
[Mon May 21 01:02:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 01:03:16 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Mon May 21 01:03:16 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Mon May 21 01:03:16 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Mon May 21 01:03:16 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 7.26"
[Mon May 21 04:51:06 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src33.ximg exists
[Mon May 21 04:51:06 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src33_1.ximg exists
[Mon May 21 04:51:06 2012] Fit fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src33 appears to have run properly
[Mon May 21 04:51:07 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Mon May 21 04:51:07 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Mon May 21 04:51:07 2012] Fit fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Mon May 21 11:53:22 2012] Spatial fit model total counts = 17578.000000, observed total counts = 17571.000000
[Mon May 21 11:53:22 2012] Offset between fit and detection position for source 64 = 3.610948 pixels
[Mon May 21 11:53:22 2012] 17674.391000 total counts/ 17277.000000 bgd. counts: snr = 3.023318
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 3.610948 pixels
  Position = (319.7, 287.6) = 13 47 24.77 -32 54 11.0
  Extent = 14.5 (14.5-14.5)", rotation angle = 0
  Source counts = 397.4 +/- 132.9
  Background counts = 17277.0
  Rate = 0.01 +/- 0.005
[Mon May 21 11:53:22 2012] Vigneting correction estimate = 1.000000
[Mon May 21 11:53:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 11:53:22 2012] Assessing source extent using major axis lower bound
[Mon May 21 11:53:22 2012] Source does appear to be extended
[Mon May 21 11:53:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 11:54:14 2012] XMMSAS src. selection expression = ellipse(27764.185800, 24971.264000, 869.952025, 869.952025, 0.000000, X, Y)
[Mon May 21 11:54:14 2012] Writing source region out to fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src64_src.reg
[Mon May 21 11:54:14 2012] Extracting stamp from image fullrun_pn_xmm0086950201_pi300-10000_cl_sm2.00.img.gz, (270, 238) - (370, 338)
[Mon May 21 11:54:14 2012] XMMSAS bgd. selection expression = annulus(27764.185800, 24971.264000, 1449.920042, 2899.840083, X, Y) && !ellipse(26772.202000, 27730.468000, 6964.176200, 6964.176200, 0.000000, X, Y) && !ellipse(24002.135986, 27248.926178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24159.069458, 26798.911987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24522.535004, 26125.633728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25632.965400, 26367.617200, 351.376810, 351.376810, 0.000000, X, Y) && !ellipse(29573.805237, 26993.406158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29150.309479, 26658.107819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24638.294281, 25592.057800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28814.981934, 24936.100952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26135.205109, 25455.783112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28460.710754, 24291.887299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25978.247742, 24063.005188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26674.286200, 24448.940000, 1117.120032, 1117.120032, 0.000000, X, Y)
[Mon May 21 11:54:14 2012] Writing fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src64.gif
[Mon May 21 13:03:04 2012] Mean detx,y = (289.42, 2978.11) 
[Mon May 21 13:03:08 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 13:03:51 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 13:03:52 2012] Setting source spectrum file to fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Mon May 21 13:03:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src64_bgd.pi.gz
[Wed May 23 12:06:37 2012] Updating aperture counts using extracted products
[Wed May 23 12:06:37 2012] Error reading totcts from fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Wed May 23 12:06:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 12:06:39 2012] Using photon index=1.80, rate=0.0145, arf fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src64.arf
[Wed May 23 12:06:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 12:06:39 2012] Updating source flux to 4.2e-14
[Wed May 23 12:20:56 2012] Flag b found in src. 64 procflags, skipping spectral fitting