[Sun May 20 10:41:30 2012] Detection parameters:
  Position = (279.5, 347.1) = 13 47 38.64 -32 49 51.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 367.8 +/- 47.7
  Background counts = 908.5
  Rate = 0.02 +/- 0.002

[Sun May 20 10:41:31 2012] Off-axis axis estimate = 3.78'
[Sun May 20 10:50:44 2012] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Sun May 20 10:50:44 2012] Initial guess for spatial extent in simple fitting = 8.32"
[Sun May 20 10:50:44 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.074
[Sun May 20 10:50:44 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 8.32"
[Sun May 20 17:24:48 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src45.ximg exists
[Sun May 20 17:24:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src45.csv
[Sun May 20 17:24:48 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src45_1.ximg exists
[Sun May 20 17:24:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src45.csv
[Sun May 20 17:24:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 17:24:51 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Sun May 20 17:24:51 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Sun May 20 17:24:51 2012] Fit fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Mon May 21 01:02:27 2012] Source 54 is offset by -4.694067 and 4.467904 pixels which is larger than
2 X fitted extent = 0.956405 x 0.956405, not incorporating fit results
[Mon May 21 01:02:27 2012] Source 54 is offset by -4.708619 and 4.380226 pixels which is larger than
2 X fitted extent = 0.944602 x 0.944602, not incorporating fit results
[Mon May 21 01:02:28 2012] Vigneting correction estimate = 1.000000
[Mon May 21 01:02:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 01:02:28 2012] Assessing source extent using major
[Mon May 21 01:02:28 2012] Source does appear to be extended
[Mon May 21 01:02:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 01:02:28 2012] Source is confused with source 55
[Mon May 21 01:03:16 2012] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Mon May 21 01:03:16 2012] Initial guess for spatial extent in simple fitting = 8.32"
[Mon May 21 01:03:16 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.074
[Mon May 21 01:03:16 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 8.32"
[Mon May 21 04:51:06 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src26.ximg exists
[Mon May 21 04:51:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src26.csv
[Mon May 21 04:51:06 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src26_1.ximg exists
[Mon May 21 04:51:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src26.csv
[Mon May 21 04:51:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 04:51:07 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Mon May 21 04:51:07 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Mon May 21 04:51:07 2012] Fit fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Mon May 21 11:53:22 2012] Source 54 is offset by -4.675561 and -4.113153 pixels which is larger than
2 X fitted extent = 2.224828 x 2.224828, not incorporating fit results
[Mon May 21 11:53:22 2012] Source 54 is offset by -4.686780 and 4.457836 pixels which is larger than
2 X fitted extent = 0.956405 x 0.956405, not incorporating fit results
[Mon May 21 11:53:22 2012] Source 54 is offset by -4.878090 and 0.684318 pixels which is larger than
2 X fitted extent = 0.925490 x 0.925490, not incorporating fit results
[Mon May 21 11:53:22 2012] Vigneting correction estimate = 1.000000
[Mon May 21 11:53:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 11:53:22 2012] Assessing source extent using major
[Mon May 21 11:53:22 2012] Source does appear to be extended
[Mon May 21 11:53:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 11:54:14 2012] XMMSAS src. selection expression = ellipse(24270.246155, 30148.175690, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 21 11:54:14 2012] Writing source region out to fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src54_src.reg
[Mon May 21 11:54:14 2012] Extracting stamp from image fullrun_pn_xmm0086950201_pi300-10000_cl_sm2.00.img.gz, (242, 310) - (317, 385)
[Mon May 21 11:54:14 2012] XMMSAS bgd. selection expression = annulus(24270.246155, 30148.175690, 1087.500000, 2175.000000, X, Y) && !ellipse(26772.202000, 27730.468000, 6964.176200, 6964.176200, 0.000000, X, Y) && !ellipse(26721.201935, 31704.792816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26852.116119, 30049.713928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26816.722120, 29744.726000, 1311.168038, 1311.168038, 0.000000, X, Y) && !ellipse(25959.930695, 29255.315887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24002.135986, 27248.926178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.240000, 33495.134000, 1548.480045, 1548.480045, 0.000000, X, Y) && !ellipse(27030.372131, 32996.392883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25902.244873, 32744.616455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26242.070038, 31955.472717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23681.283661, 30135.171356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24072.173004, 29347.445404, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 21 11:54:14 2012] Writing fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src54.gif
[Mon May 21 12:56:35 2012] Mean detx,y = (-937.48, -3034.56) 
[Mon May 21 12:56:40 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 12:57:07 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 12:57:08 2012] Setting source spectrum file to fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Mon May 21 12:57:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Wed May 23 04:48:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 23 04:48:31 2012] rmf not generated due to insufficient counts
[Wed May 23 12:06:37 2012] Updating aperture counts using extracted products
[Wed May 23 12:06:37 2012] Error reading totcts from fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Wed May 23 12:06:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 12:06:39 2012] Using photon index=1.80, rate=0.0159, arf fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src54.arf
[Wed May 23 12:06:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 12:06:39 2012] Updating source flux to 5e-14
[Wed May 23 12:20:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting