[Sun May 20 10:41:30 2012] Detection parameters:
  Position = (337.5, 356.9) = 13 47 18.63 -32 49 10.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 882.5 +/- 58.6
  Background counts = 1155.5
  Rate = 0.04 +/- 0.002

[Sun May 20 10:41:31 2012] Off-axis axis estimate = 5.10'
[Sun May 20 10:50:44 2012] Using EEF radius (= 8.98 ")to estimate initial spatial extent for simple fitting
[Sun May 20 10:50:44 2012] Initial guess for spatial extent in simple fitting = 8.98"
[Sun May 20 10:50:44 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.141
[Sun May 20 10:50:44 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 8.98"
[Sun May 20 17:24:47 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src44.ximg exists
[Sun May 20 17:24:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src44.csv
[Sun May 20 17:24:48 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src44_1.ximg exists
[Sun May 20 17:24:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src44.csv
[Sun May 20 17:24:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 17:24:51 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Sun May 20 17:24:51 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Sun May 20 17:24:51 2012] Fit fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Mon May 21 01:02:27 2012] Spatial fit model total counts = 15329.500000, observed total counts = 11554.000000
[Mon May 21 01:02:27 2012] Poor agreement between spatial fit and data for source 53
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 21 01:02:27 2012] Source 53 is offset by -6.363951 and 1.583817 pixels which is larger than
2 X fitted extent = 1.801687 x 1.801687, not incorporating fit results
[Mon May 21 01:02:27 2012] Warning, spatial fit 44 centroid is now closest to src. 48
[Mon May 21 01:02:28 2012] Vigneting correction estimate = 1.000000
[Mon May 21 01:02:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 01:02:28 2012] Assessing source extent using major
[Mon May 21 01:02:28 2012] Source does appear to be extended
[Mon May 21 01:02:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 01:03:16 2012] Using EEF radius (= 8.98 ")to estimate initial spatial extent for simple fitting
[Mon May 21 01:03:16 2012] Initial guess for spatial extent in simple fitting = 8.98"
[Mon May 21 01:03:16 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.141
[Mon May 21 01:03:16 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 8.98"
[Mon May 21 04:51:06 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src25.ximg exists
[Mon May 21 04:51:06 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src25_1.ximg exists
[Mon May 21 04:51:06 2012] Fit fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src25 appears to have run properly
[Mon May 21 04:51:07 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Mon May 21 04:51:07 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Mon May 21 04:51:07 2012] Fit fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Mon May 21 11:53:22 2012] Spatial fit model total counts = 15302.600000, observed total counts = 11554.000000
[Mon May 21 11:53:22 2012] Poor agreement between spatial fit and data for source 53
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 21 11:53:22 2012] Warning, spatial fit 25 centroid is now closest to src. 2
[Mon May 21 11:53:22 2012] Vigneting correction estimate = 1.000000
[Mon May 21 11:53:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 11:53:22 2012] Assessing source extent using major
[Mon May 21 11:53:22 2012] Source does appear to be extended
[Mon May 21 11:53:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 11:54:14 2012] XMMSAS src. selection expression = ellipse(29312.449463, 31005.928040, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 21 11:54:14 2012] Writing source region out to fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src53_src.reg
[Mon May 21 11:54:14 2012] Extracting stamp from image fullrun_pn_xmm0086950201_pi300-10000_cl_sm2.00.img.gz, (300, 319) - (375, 394)
[Mon May 21 11:54:14 2012] XMMSAS bgd. selection expression = annulus(29312.449463, 31005.928040, 1087.500000, 2175.000000, X, Y) && !ellipse(26772.202000, 27730.468000, 6964.176200, 6964.176200, 0.000000, X, Y) && !ellipse(29155.494751, 29800.794312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27657.877686, 32288.142578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26721.201935, 31704.792816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27527.513092, 30749.152191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26852.116119, 30049.713928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26816.722120, 29744.726000, 1311.168038, 1311.168038, 0.000000, X, Y) && !ellipse(29591.891296, 29306.268555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27575.747009, 33548.524811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.240000, 33495.134000, 1548.480045, 1548.480045, 0.000000, X, Y) && !ellipse(28645.976320, 33063.018000, 1545.984044, 1545.984044, 0.000000, X, Y) && !ellipse(28159.086151, 33093.094360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27030.372131, 32996.392883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28809.990479, 32660.582123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28184.077942, 32235.026062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28789.934387, 31449.248901, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 21 11:54:14 2012] Writing fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src53.gif
[Mon May 21 12:55:26 2012] Mean detx,y = (3976.43, -1939.33) 
[Mon May 21 12:55:30 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 12:56:11 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 12:56:11 2012] Setting source spectrum file to fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Mon May 21 12:56:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Wed May 23 04:48:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 23 04:48:19 2012] rmf not generated due to insufficient counts
[Wed May 23 12:06:37 2012] Updating aperture counts using extracted products
[Wed May 23 12:06:37 2012] Error reading totcts from fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Wed May 23 12:06:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 12:06:39 2012] Using photon index=1.80, rate=0.0374, arf fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src53.arf
[Wed May 23 12:06:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 12:06:39 2012] Updating source flux to 1.1e-13
[Wed May 23 12:20:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting