[Sun May 20 10:41:28 2012] Detection parameters:
  Position = (317.0, 354.0) = 13 47 25.71 -32 49 22.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1420.3 +/- 72.3
  Background counts = 1364.7
  Rate = 0.06 +/- 0.003

[Sun May 20 10:41:31 2012] Off-axis axis estimate = 4.25'
[Sun May 20 10:50:44 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Sun May 20 10:50:44 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Sun May 20 10:50:44 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.822
[Sun May 20 10:50:44 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.55"
[Sun May 20 17:24:46 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src3.ximg exists
[Sun May 20 17:24:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src3.csv
[Sun May 20 17:24:46 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun May 20 17:24:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src3.csv
[Sun May 20 17:24:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 17:24:49 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun May 20 17:24:49 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun May 20 17:24:49 2012] Fit fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon May 21 01:02:27 2012] Warning, spatial fit 3 centroid is now closest to src. 6
[Mon May 21 01:02:28 2012] Vigneting correction estimate = 1.000000
[Mon May 21 01:02:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 01:02:28 2012] Assessing source extent using major
[Mon May 21 01:02:28 2012] Source does appear to be extended
[Mon May 21 01:02:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 01:03:16 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Mon May 21 01:03:16 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Mon May 21 01:03:16 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.822
[Mon May 21 01:03:16 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.55"
[Mon May 21 04:51:05 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src3.ximg exists
[Mon May 21 04:51:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src3.csv
[Mon May 21 04:51:05 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon May 21 04:51:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src3.csv
[Mon May 21 04:51:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 04:51:06 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon May 21 04:51:06 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon May 21 04:51:06 2012] Fit fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon May 21 11:53:22 2012] Warning, spatial fit 3 centroid is now closest to src. 6
[Mon May 21 11:53:22 2012] Spatial fit model total counts = 11136.000000, observed total counts = 28930.000000
[Mon May 21 11:53:22 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 21 11:53:22 2012] Vigneting correction estimate = 1.000000
[Mon May 21 11:53:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 11:53:22 2012] Assessing source extent using major
[Mon May 21 11:53:22 2012] Source does appear to be extended
[Mon May 21 11:53:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 11:54:12 2012] Counts = 1420.275269, rescaling region sizes by 2.000000
[Mon May 21 11:54:12 2012] XMMSAS src. selection expression = ellipse(27527.513092, 30749.152191, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May 21 11:54:12 2012] Writing source region out to fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src5_src.reg
[Mon May 21 11:54:12 2012] Extracting stamp from image fullrun_pn_xmm0086950201_pi300-10000_cl_sm2.00.img.gz, (242, 279) - (392, 429)
[Mon May 21 11:54:12 2012] XMMSAS bgd. selection expression = annulus(27527.513092, 30749.152191, 4350.000000, 8700.000000, X, Y) && !ellipse(26772.202000, 27730.468000, 6964.176200, 6964.176200, 0.000000, X, Y) && !ellipse(29155.494751, 29800.794312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27657.877686, 32288.142578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26721.201935, 31704.792816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26852.116119, 30049.713928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26816.722120, 29744.726000, 1311.168038, 1311.168038, 0.000000, X, Y) && !ellipse(29591.891296, 29306.268555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25959.930695, 29255.315887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24002.135986, 27248.926178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24159.069458, 26798.911987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24522.535004, 26125.633728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25632.965400, 26367.617200, 351.376810, 351.376810, 0.000000, X, Y) && !ellipse(26991.048492, 34422.398499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27575.747009, 33548.524811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.240000, 33495.134000, 1548.480045, 1548.480045, 0.000000, X, Y) && !ellipse(28645.976320, 33063.018000, 1545.984044, 1545.984044, 0.000000, X, Y) && !ellipse(28159.086151, 33093.094360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27030.372131, 32996.392883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28809.990479, 32660.582123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25902.244873, 32744.616455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28184.077942, 32235.026062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26242.070038, 31955.472717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28789.934387, 31449.248901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29312.449463, 31005.928040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24270.246155, 30148.175690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23681.283661, 30135.171356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24072.173004, 29347.445404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29573.805237, 26993.406158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29150.309479, 26658.107819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24638.294281, 25592.057800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27764.185800, 24971.264000, 1159.936033, 1159.936033, 0.000000, X, Y) && !ellipse(28814.981934, 24936.100952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26135.205109, 25455.783112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28460.710754, 24291.887299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25978.247742, 24063.005188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26674.286200, 24448.940000, 1117.120032, 1117.120032, 0.000000, X, Y)
[Mon May 21 11:54:12 2012] Writing fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src5.gif
[Mon May 21 12:08:19 2012] Mean detx,y = (2036.27, -2332.33) 
[Mon May 21 12:08:27 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 12:10:31 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 12:10:32 2012] Setting source spectrum file to fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon May 21 12:10:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue May 22 22:16:08 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 22 22:16:08 2012] rmf not generated due to insufficient counts
[Wed May 23 12:06:35 2012] Updating aperture counts using extracted products
[Wed May 23 12:06:35 2012] Error reading totcts from fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed May 23 12:06:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 12:06:38 2012] Using photon index=1.80, rate=0.0585, arf fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src5.arf
[Wed May 23 12:06:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 12:06:38 2012] Updating source flux to 1.6e-13
[Wed May 23 12:20:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 23 12:22:51 2012] xmm0086950201/analysis//spectral/fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete