[Sun May 20 10:41:29 2012] Detection parameters:
  Position = (304.4, 386.0) = 13 47 30.04 -32 47 1.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 302.2 +/- 41.6
  Background counts = 756.6
  Rate = 0.01 +/- 0.002

[Sun May 20 10:41:31 2012] Off-axis axis estimate = 6.36'
[Sun May 20 10:50:44 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Sun May 20 10:50:44 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Sun May 20 10:50:44 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.022
[Sun May 20 10:50:44 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 9.61"
[Sun May 20 17:24:47 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src25.ximg exists
[Sun May 20 17:24:47 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun May 20 17:24:47 2012] Fit fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_src25 appears to have run properly
[Sun May 20 17:24:50 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun May 20 17:24:50 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun May 20 17:24:50 2012] Fit fullrun_pn_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Mon May 21 01:02:27 2012] Spatial fit model total counts = 9513.130000, observed total counts = 9508.000000
[Mon May 21 01:02:27 2012] Offset between fit and detection position for source 32 = 0.749544 pixels
[Mon May 21 01:02:27 2012] Warning, changing simple spatial fit ID from 25 to 22
[Mon May 21 01:02:27 2012] 9310.294000 total counts/ 8889.290000 bgd. counts: snr = 4.465321
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.749544 pixels
  Position = (304.6, 385.3) = 13 47 29.98 -32 47 6.1
  Extent = 19.4 (19.3-38.7)", rotation angle = 0
  Source counts = 421.0 +/- 96.5
  Background counts = 8889.3
  Rate = 0.02 +/- 0.004
[Mon May 21 01:02:28 2012] Vigneting correction estimate = 1.000000
[Mon May 21 01:02:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 01:02:28 2012] Assessing source extent using major axis lower bound
[Mon May 21 01:02:28 2012] Source does appear to be extended
[Mon May 21 01:02:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 01:02:28 2012] Source is confused with source 14
[Mon May 21 01:03:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 21 01:03:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 21 01:03:16 2012] Initial guess for spatial extent in simple fitting = 19.36"
[Mon May 21 01:03:16 2012] source mask rpix=4.4, npix_max = 97, mask sum = 100, frac = 1.020
[Mon May 21 01:03:16 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 19.36"
[Mon May 21 04:51:05 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src11.ximg exists
[Mon May 21 04:51:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src11.csv
[Mon May 21 04:51:05 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon May 21 04:51:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src11.csv
[Mon May 21 04:51:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 04:51:06 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon May 21 04:51:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon May 21 04:51:06 2012] fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon May 21 04:51:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon May 21 04:51:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 11:53:22 2012] Spatial fit model total counts = 8396.370000, observed total counts = 8391.000000
[Mon May 21 11:53:22 2012] Offset between fit and detection position for source 32 = 0.329015 pixels
[Mon May 21 11:53:22 2012] Warning, changing simple spatial fit ID from 11 to 10
[Mon May 21 11:53:22 2012] 8221.974000 total counts/ 7812.850000 bgd. counts: snr = 4.628606
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.329015 pixels
  Position = (304.5, 385.6) = 13 47 30.03 -32 47 4.8
  Extent = 19.4 (19.3-38.7)", rotation angle = 0
  Source counts = 409.1 +/- 90.7
  Background counts = 7812.9
  Rate = 0.01 +/- 0.003
[Mon May 21 11:53:22 2012] Vigneting correction estimate = 1.000000
[Mon May 21 11:53:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 11:53:22 2012] Assessing source extent using major axis lower bound
[Mon May 21 11:53:22 2012] Source does appear to be extended
[Mon May 21 11:53:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 11:54:13 2012] XMMSAS src. selection expression = ellipse(26439.240000, 33495.134000, 1161.360033, 1161.360033, 0.000000, X, Y)
[Mon May 21 11:54:13 2012] Writing source region out to fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src32_src.reg
[Mon May 21 11:54:13 2012] Extracting stamp from image fullrun_pn_xmm0086950201_pi300-10000_cl_sm2.00.img.gz, (238, 319) - (371, 452)
[Mon May 21 11:54:13 2012] XMMSAS bgd. selection expression = annulus(26439.240000, 33495.134000, 1935.600056, 3871.200111, X, Y) && !ellipse(26772.202000, 27730.468000, 6964.176200, 6964.176200, 0.000000, X, Y) && !ellipse(29155.494751, 29800.794312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27657.877686, 32288.142578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26721.201935, 31704.792816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27527.513092, 30749.152191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26852.116119, 30049.713928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26816.722120, 29744.726000, 1311.168038, 1311.168038, 0.000000, X, Y) && !ellipse(29591.891296, 29306.268555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25959.930695, 29255.315887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26991.048492, 34422.398499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27575.747009, 33548.524811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28645.976320, 33063.018000, 1545.984044, 1545.984044, 0.000000, X, Y) && !ellipse(28159.086151, 33093.094360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27030.372131, 32996.392883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28809.990479, 32660.582123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25902.244873, 32744.616455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28184.077942, 32235.026062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26242.070038, 31955.472717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28789.934387, 31449.248901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29312.449463, 31005.928040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24270.246155, 30148.175690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23681.283661, 30135.171356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24072.173004, 29347.445404, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 21 11:54:13 2012] Writing fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src32.gif
[Mon May 21 12:44:34 2012] Mean detx,y = (2160.56, -5226.40) 
[Mon May 21 12:44:39 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 12:45:48 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 12:45:49 2012] Setting source spectrum file to fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Mon May 21 12:45:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Wed May 23 12:06:36 2012] Updating aperture counts using extracted products
[Wed May 23 12:06:36 2012] Error reading totcts from fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed May 23 12:06:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 12:06:38 2012] Using photon index=1.80, rate=0.0149, arf fullrun_pn_xmm0086950201_pi300-10000_pass1_cl_src32.arf
[Wed May 23 12:06:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 12:06:38 2012] Updating source flux to 4.8e-14
[Wed May 23 12:20:56 2012] Flag c found in src. 32 procflags, skipping spectral fitting