[Sun May 20 10:43:07 2012] Detection parameters:
  Position = (296.9, 300.7) = 13 47 32.63 -32 53 6.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 796.8 +/- 44.4
  Background counts = 560.5
  Rate = 0.03 +/- 0.001

[Sun May 20 10:43:09 2012] Off-axis axis estimate = 0.20'
[Sun May 20 21:37:44 2012] Using EEF radius (= 6.53 ")to estimate initial spatial extent for simple fitting
[Sun May 20 21:37:44 2012] Initial guess for spatial extent in simple fitting = 6.53"
[Sun May 20 21:37:44 2012] source mask rpix=1.5, npix_max = 16, mask sum = 15, frac = 0.937
[Sun May 20 21:37:44 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 6.53"
[Mon May 21 01:02:08 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src9.ximg exists
[Mon May 21 01:02:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src9.csv
[Mon May 21 01:02:08 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon May 21 01:02:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src9.csv
[Mon May 21 01:02:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 01:02:09 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon May 21 01:02:09 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon May 21 01:02:09 2012] Fit fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Mon May 21 01:02:58 2012] Source 8 is offset by -0.703650 and -7.337437 pixels which is larger than
2 X fitted extent = 6.001012 x 6.001012, not incorporating fit results
[Mon May 21 01:02:58 2012] Source 8 is offset by 1.190314 and -6.465920 pixels which is larger than
2 X fitted extent = 3.422046 x 3.422046, not incorporating fit results
[Mon May 21 01:02:58 2012] Vigneting correction estimate = 1.000000
[Mon May 21 01:02:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 01:02:58 2012] Assessing source extent using major
[Mon May 21 01:02:58 2012] Source does appear to be extended
[Mon May 21 01:02:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 01:02:58 2012] Source is confused with source 18
[Mon May 21 09:04:23 2012] Using EEF radius (= 6.53 ")to estimate initial spatial extent for simple fitting
[Mon May 21 09:04:23 2012] Initial guess for spatial extent in simple fitting = 6.53"
[Mon May 21 09:04:23 2012] source mask rpix=1.5, npix_max = 16, mask sum = 15, frac = 0.937
[Mon May 21 09:04:23 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 6.53"
[Mon May 21 11:53:03 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src7.ximg exists
[Mon May 21 11:53:03 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon May 21 11:53:03 2012] Fit fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src7 appears to have run properly
[Mon May 21 11:53:03 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon May 21 11:53:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon May 21 11:53:04 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon May 21 11:53:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon May 21 11:53:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 11:53:50 2012] Warning, spatial fit 7 centroid is now closest to src. 18
[Mon May 21 11:53:50 2012] Source 8 is offset by 2.241210 and -4.584771 pixels which is larger than
2 X fitted extent = 0.948823 x 0.948823, not incorporating fit results
[Mon May 21 11:53:50 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 13.562245 pixels away
[Mon May 21 11:53:50 2012] Vigneting correction estimate = 1.000000
[Mon May 21 11:53:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 11:53:50 2012] Assessing source extent using major
[Mon May 21 11:53:50 2012] Source does appear to be extended
[Mon May 21 11:53:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 09:44:57 2012] XMMSAS src. selection expression = ellipse(25784.125275, 26109.230957, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 23 09:44:57 2012] Writing source region out to fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src8_src.reg
[Wed May 23 09:44:57 2012] Extracting stamp from image fullrun_mos2_xmm0086950201_pi300-10000_cl_sm2.00.img.gz, (259, 263) - (334, 338)
[Wed May 23 09:44:57 2012] XMMSAS bgd. selection expression = annulus(25784.125275, 26109.230957, 1087.500000, 2175.000000, X, Y) && !ellipse(26788.732605, 27519.144440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27005.890106, 28674.196350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27321.756287, 24836.808167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27485.003418, 26045.396088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29679.138214, 28045.734985, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28073.081787, 28574.393799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27264.552000, 31032.270000, 2835.312082, 2835.312082, 0.000000, X, Y) && !ellipse(25360.273743, 26041.931274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27441.867157, 25366.682983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27496.512970, 24121.341492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24657.498108, 28490.147064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28210.511414, 24473.260315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24544.862000, 26145.304000, 1099.280032, 1099.280032, 0.000000, X, Y) && !ellipse(26489.078033, 24302.013580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30086.032000, 26831.022000, 2370.080068, 2320.016067, 0.000000, X, Y)
[Wed May 23 09:44:57 2012] Writing fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src8.gif
[Wed May 23 09:55:35 2012] Mean detx,y = (1209.14, -1388.28) 
[Wed May 23 09:55:38 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 09:55:49 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 09:55:49 2012] Setting source spectrum file to fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed May 23 09:55:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed May 23 10:53:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 23 10:54:00 2012] rmf not generated due to insufficient counts
[Wed May 23 12:06:45 2012] Updating aperture counts using extracted products
[Wed May 23 12:06:45 2012] Error reading totcts from fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed May 23 12:06:47 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 12:06:47 2012] Using photon index=1.80, rate=0.0269, arf fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src8.arf
[Wed May 23 12:06:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 12:06:47 2012] Updating source flux to 3.1e-13
[Wed May 23 12:16:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting