[Sun May 20 10:43:09 2012] Detection parameters:
  Position = (324.8, 281.9) = 13 47 23.00 -32 54 32.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 206.1 +/- 28.0
  Background counts = 434.1
  Rate = 0.008 +/- 0.001

[Sun May 20 10:43:09 2012] Off-axis axis estimate = 2.26'
[Sun May 20 21:37:44 2012] Using EEF radius (= 7.56 ")to estimate initial spatial extent for simple fitting
[Sun May 20 21:37:44 2012] Initial guess for spatial extent in simple fitting = 7.56"
[Sun May 20 21:37:44 2012] source mask rpix=1.7, npix_max = 20, mask sum = 11, frac = 0.549
[Sun May 20 21:37:44 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 7.56"
[Mon May 21 01:02:08 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src30.ximg exists
[Mon May 21 01:02:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src30.csv
[Mon May 21 01:02:08 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src30_1.ximg exists
[Mon May 21 01:02:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src30.csv
[Mon May 21 01:02:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 01:02:10 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Mon May 21 01:02:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src30.csv
[Mon May 21 01:02:10 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Mon May 21 01:02:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src30.csv
[Mon May 21 01:02:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 01:02:58 2012] Warning, spatial fit 30 centroid is now closest to src. 11
[Mon May 21 01:02:58 2012] Vigneting correction estimate = 1.000000
[Mon May 21 01:02:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 01:02:58 2012] Assessing source extent using major
[Mon May 21 01:02:58 2012] Source does appear to be extended
[Mon May 21 01:02:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 09:04:23 2012] Using EEF radius (= 7.56 ")to estimate initial spatial extent for simple fitting
[Mon May 21 09:04:23 2012] Initial guess for spatial extent in simple fitting = 7.56"
[Mon May 21 09:04:23 2012] source mask rpix=1.7, npix_max = 20, mask sum = 11, frac = 0.549
[Mon May 21 09:04:23 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 7.56"
[Mon May 21 11:53:03 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src24.ximg exists
[Mon May 21 11:53:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src24.csv
[Mon May 21 11:53:03 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src24_1.ximg exists
[Mon May 21 11:53:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src24.csv
[Mon May 21 11:53:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 11:53:04 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Mon May 21 11:53:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src24.csv
[Mon May 21 11:53:04 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Mon May 21 11:53:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src24.csv
[Mon May 21 11:53:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 11:53:50 2012] Source 53 is offset by 4.225832 and 0.322073 pixels which is larger than
2 X fitted extent = 0.845361 x 0.845361, not incorporating fit results
[Mon May 21 11:53:50 2012] Source 53 is offset by 1.988660 and -0.453629 pixels which is larger than
2 X fitted extent = 0.853444 x 0.853444, not incorporating fit results
[Mon May 21 11:53:50 2012] Warning, spatial fit 24 centroid is now closest to src. 11
[Mon May 21 11:53:51 2012] Vigneting correction estimate = 1.000000
[Mon May 21 11:53:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 11:53:51 2012] Assessing source extent using major
[Mon May 21 11:53:51 2012] Source does appear to be extended
[Mon May 21 11:53:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 09:44:57 2012] XMMSAS src. selection expression = ellipse(28210.511414, 24473.260315, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 23 09:44:57 2012] Writing source region out to fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src53_src.reg
[Wed May 23 09:44:57 2012] Extracting stamp from image fullrun_mos2_xmm0086950201_pi300-10000_cl_sm2.00.img.gz, (287, 244) - (362, 319)
[Wed May 23 09:44:57 2012] XMMSAS bgd. selection expression = annulus(28210.511414, 24473.260315, 1087.500000, 2175.000000, X, Y) && !ellipse(27321.756287, 24836.808167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27485.003418, 26045.396088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25784.125275, 26109.230957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29679.138214, 28045.734985, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25360.273743, 26041.931274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27441.867157, 25366.682983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29193.200000, 27120.295800, 1185.040034, 1185.040034, 0.000000, X, Y) && !ellipse(27496.512970, 24121.341492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26489.078033, 24302.013580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30086.032000, 26831.022000, 2370.080068, 2320.016067, 0.000000, X, Y)
[Wed May 23 09:44:57 2012] Writing fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src53.gif
[Wed May 23 10:08:04 2012] Mean detx,y = (-366.64, -3795.33) 
[Wed May 23 10:08:06 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 10:08:21 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 10:08:22 2012] Setting source spectrum file to fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Wed May 23 10:08:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Wed May 23 11:34:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 23 11:34:21 2012] rmf not generated due to insufficient counts
[Wed May 23 12:06:46 2012] Updating aperture counts using extracted products
[Wed May 23 12:06:46 2012] Error reading totcts from fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Wed May 23 12:06:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 12:06:48 2012] Using photon index=1.80, rate=0.00818, arf fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src53.arf
[Wed May 23 12:06:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 12:06:48 2012] Updating source flux to 9e-14
[Wed May 23 12:16:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting