[Sun May 20 10:43:09 2012] Detection parameters:
  Position = (343.5, 308.5) = 13 47 16.54 -32 52 40.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.4 +/- 32.5
  Background counts = 535.8
  Rate = 0.005 +/- 0.001

[Sun May 20 10:43:09 2012] Off-axis axis estimate = 3.35'
[Sun May 20 21:37:44 2012] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Sun May 20 21:37:44 2012] Initial guess for spatial extent in simple fitting = 8.10"
[Sun May 20 21:37:44 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.120
[Sun May 20 21:37:44 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 8.10"
[Mon May 21 01:02:09 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src49.ximg exists
[Mon May 21 01:02:09 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src49_1.ximg exists
[Mon May 21 01:02:09 2012] Fit fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src49 appears to have run properly
[Mon May 21 01:02:10 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Mon May 21 01:02:10 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Mon May 21 01:02:10 2012] Fit fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Mon May 21 01:02:58 2012] Source 47 is offset by 2.922374 and 5.381338 pixels which is larger than
2 X fitted extent = 0.931398 x 0.931398, not incorporating fit results
[Mon May 21 01:02:58 2012] Vigneting correction estimate = 1.000000
[Mon May 21 01:02:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 01:02:58 2012] Assessing source extent using major
[Mon May 21 01:02:58 2012] Source does appear to be extended
[Mon May 21 01:02:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 01:02:58 2012] Source is confused with source 12
[Mon May 21 09:04:23 2012] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Mon May 21 09:04:23 2012] Initial guess for spatial extent in simple fitting = 8.10"
[Mon May 21 09:04:23 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.120
[Mon May 21 09:04:23 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 8.10"
[Mon May 21 11:53:03 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src36.ximg exists
[Mon May 21 11:53:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src36.csv
[Mon May 21 11:53:03 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src36_1.ximg exists
[Mon May 21 11:53:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src36.csv
[Mon May 21 11:53:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 11:53:04 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Mon May 21 11:53:04 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Mon May 21 11:53:04 2012] Fit fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Mon May 21 11:53:50 2012] Spatial fit model total counts = 13426.500000, observed total counts = 13427.000000
[Mon May 21 11:53:50 2012] Offset between fit and detection position for source 47 = 2.887395 pixels
[Mon May 21 11:53:50 2012] Warning, changing simple spatial fit ID from 36 to 18
[Mon May 21 11:53:50 2012] 12895.140000 total counts/ 11043.900000 bgd. counts: snr = 17.615764
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 2.887395 pixels
  Position = (346.4, 309.0) = 13 47 15.56 -32 52 38.0
  Extent = 29.6 (23.7-59.3)" x 29.0 (27.8-29.6)", rotation angle = 0 (169-0) degrees
  Source counts = 1851.2 +/- 113.6
  Background counts = 11043.9
  Rate = 0.06 +/- 0.004
[Mon May 21 11:53:51 2012] Vigneting correction estimate = 1.000000
[Mon May 21 11:53:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 11:53:51 2012] Assessing source extent using major axis lower bound
[Mon May 21 11:53:51 2012] Source does appear to be extended
[Mon May 21 11:53:51 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.80
[Wed May 23 09:44:58 2012] Counts = 1851.240000, rescaling region sizes by 2.000000
[Wed May 23 09:44:58 2012] XMMSAS src. selection expression = ellipse(30086.032000, 26831.022000, 3555.120102, 3480.024100, 0.000000, X, Y)
[Wed May 23 09:44:58 2012] Writing source region out to fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src47_src.reg
[Wed May 23 09:44:58 2012] Extracting stamp from image fullrun_mos2_xmm0086950201_pi300-10000_cl_sm2.00.img.gz, (142, 105) - (551, 513)
[Wed May 23 09:44:58 2012] XMMSAS bgd. selection expression = annulus(30086.032000, 26831.022000, 11850.400341, 23700.800682, X, Y) && !ellipse(26788.732605, 27519.144440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28523.254000, 30536.022000, 1318.560038, 1318.560038, 0.000000, X, Y) && !ellipse(27005.890106, 28674.196350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26772.540000, 29903.576000, 1256.848036, 1256.848036, 0.000000, X, Y) && !ellipse(27321.756287, 24836.808167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27485.003418, 26045.396088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25784.125275, 26109.230957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25097.820000, 29612.436000, 1246.928036, 1246.928036, 0.000000, X, Y) && !ellipse(29679.138214, 28045.734985, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28073.081787, 28574.393799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26716.952600, 31735.675600, 432.882412, 432.882412, 0.000000, X, Y) && !ellipse(27264.552000, 31032.270000, 2835.312082, 2835.312082, 0.000000, X, Y) && !ellipse(26062.558197, 30931.348267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26574.471741, 30918.144806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25636.564056, 30638.679077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25360.273743, 26041.931274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27441.867157, 25366.682983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29193.200000, 27120.295800, 1185.040034, 1185.040034, 0.000000, X, Y) && !ellipse(28785.054443, 31700.459808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27496.512970, 24121.341492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24657.498108, 28490.147064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28851.100952, 29365.481018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28281.238739, 33000.178955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25339.360077, 32508.698517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28210.511414, 24473.260315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28053.703620, 32398.522000, 1417.656041, 1417.656041, 0.000000, X, Y) && !ellipse(24544.862000, 26145.304000, 1099.280032, 1099.280032, 0.000000, X, Y) && !ellipse(25976.235229, 32323.276581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28115.944580, 31876.966156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26921.197327, 32653.732147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26489.078033, 24302.013580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23218.368000, 32595.821200, 1190.632034, 1190.632034, 0.000000, X, Y)
[Wed May 23 09:44:58 2012] Writing fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src47.gif
[Wed May 23 10:14:20 2012] Mean detx,y = (-2125.04, -1628.28) 
[Wed May 23 10:14:27 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 10:31:45 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 10:31:46 2012] Setting source spectrum file to fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Wed May 23 10:31:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Wed May 23 12:06:47 2012] Updating aperture counts using extracted products
[Wed May 23 12:06:47 2012] Error reading totcts from fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Wed May 23 12:06:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 12:06:48 2012] Using photon index=1.80, rate=0.0578, arf fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src47.arf
[Wed May 23 12:06:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 12:06:48 2012] Updating source flux to 5.1e-13
[Wed May 23 12:16:26 2012] Flag b found in src. 47 procflags, skipping spectral fitting
[Wed May 23 12:16:26 2012] Flag c found in src. 47 procflags, skipping spectral fitting