[Sun May 20 10:43:08 2012] Detection parameters:
  Position = (284.0, 328.0) = 13 47 37.10 -32 51 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 298.0 +/- 38.6
  Background counts = 549.9
  Rate = 0.01 +/- 0.001

[Sun May 20 10:43:09 2012] Off-axis axis estimate = 2.39'
[Sun May 20 21:37:44 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Sun May 20 21:37:44 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Sun May 20 21:37:44 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.789
[Sun May 20 21:37:44 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 7.62"
[Mon May 21 01:02:08 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src26.ximg exists
[Mon May 21 01:02:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src26.csv
[Mon May 21 01:02:08 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src26_1.ximg exists
[Mon May 21 01:02:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src26.csv
[Mon May 21 01:02:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 01:02:10 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Mon May 21 01:02:10 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Mon May 21 01:02:10 2012] Fit fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Mon May 21 01:02:58 2012] Warning, spatial fit 26 centroid is now closest to src. 4
[Mon May 21 01:02:58 2012] Vigneting correction estimate = 1.000000
[Mon May 21 01:02:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 01:02:58 2012] Assessing source extent using major
[Mon May 21 01:02:58 2012] Source does appear to be extended
[Mon May 21 01:02:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 09:04:23 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Mon May 21 09:04:23 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Mon May 21 09:04:23 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.789
[Mon May 21 09:04:23 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 7.62"
[Mon May 21 11:53:03 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src21.ximg exists
[Mon May 21 11:53:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src21.csv
[Mon May 21 11:53:03 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon May 21 11:53:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src21.csv
[Mon May 21 11:53:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 11:53:04 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon May 21 11:53:04 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon May 21 11:53:04 2012] Fit fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Mon May 21 11:53:50 2012] Source 44 is offset by 6.986231 and 4.020012 pixels which is larger than
2 X fitted extent = 3.303053 x 3.303053, not incorporating fit results
[Mon May 21 11:53:50 2012] Vigneting correction estimate = 1.000000
[Mon May 21 11:53:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 11:53:50 2012] Assessing source extent using major
[Mon May 21 11:53:50 2012] Source does appear to be extended
[Mon May 21 11:53:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 09:44:57 2012] XMMSAS src. selection expression = ellipse(24657.498108, 28490.147064, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 23 09:44:57 2012] Writing source region out to fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src44_src.reg
[Wed May 23 09:44:57 2012] Extracting stamp from image fullrun_mos2_xmm0086950201_pi300-10000_cl_sm2.00.img.gz, (246, 291) - (321, 366)
[Wed May 23 09:44:57 2012] XMMSAS bgd. selection expression = annulus(24657.498108, 28490.147064, 1087.500000, 2175.000000, X, Y) && !ellipse(26788.732605, 27519.144440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27005.890106, 28674.196350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26772.540000, 29903.576000, 1256.848036, 1256.848036, 0.000000, X, Y) && !ellipse(27485.003418, 26045.396088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25784.125275, 26109.230957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25097.820000, 29612.436000, 1246.928036, 1246.928036, 0.000000, X, Y) && !ellipse(27264.552000, 31032.270000, 2835.312082, 2835.312082, 0.000000, X, Y) && !ellipse(26062.558197, 30931.348267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26574.471741, 30918.144806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25636.564056, 30638.679077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25360.273743, 26041.931274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24544.862000, 26145.304000, 1099.280032, 1099.280032, 0.000000, X, Y)
[Wed May 23 09:44:57 2012] Writing fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src44.gif
[Wed May 23 10:05:38 2012] Mean detx,y = (1336.83, 1200.08) 
[Wed May 23 10:05:41 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 10:05:59 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 10:06:00 2012] Setting source spectrum file to fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Wed May 23 10:06:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Wed May 23 11:33:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 23 11:33:34 2012] rmf not generated due to insufficient counts
[Wed May 23 12:06:46 2012] Updating aperture counts using extracted products
[Wed May 23 12:06:46 2012] Error reading totcts from fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Wed May 23 12:06:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 12:06:48 2012] Using photon index=1.80, rate=0.0097, arf fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src44.arf
[Wed May 23 12:06:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 12:06:48 2012] Updating source flux to 1e-13
[Wed May 23 12:16:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting