[Sun May 20 10:43:08 2012] Detection parameters:
  Position = (332.2, 338.1) = 13 47 20.46 -32 50 29.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 289.5 +/- 40.6
  Background counts = 684.7
  Rate = 0.009 +/- 0.001

[Sun May 20 10:43:09 2012] Off-axis axis estimate = 3.77'
[Sun May 20 21:37:44 2012] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Sun May 20 21:37:44 2012] Initial guess for spatial extent in simple fitting = 8.32"
[Sun May 20 21:37:44 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.075
[Sun May 20 21:37:44 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 8.32"
[Mon May 21 01:02:08 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src27.ximg exists
[Mon May 21 01:02:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src27.csv
[Mon May 21 01:02:08 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src27_1.ximg exists
[Mon May 21 01:02:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src27.csv
[Mon May 21 01:02:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 01:02:10 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Mon May 21 01:02:10 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Mon May 21 01:02:10 2012] Fit fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Mon May 21 01:02:58 2012] Warning, spatial fit 27 centroid is now closest to src. 5
[Mon May 21 01:02:58 2012] Vigneting correction estimate = 1.000000
[Mon May 21 01:02:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 01:02:58 2012] Assessing source extent using major
[Mon May 21 01:02:58 2012] Source does appear to be extended
[Mon May 21 01:02:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 09:04:23 2012] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Mon May 21 09:04:23 2012] Initial guess for spatial extent in simple fitting = 8.32"
[Mon May 21 09:04:23 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.075
[Mon May 21 09:04:23 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 8.32"
[Mon May 21 11:53:03 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src22.ximg exists
[Mon May 21 11:53:03 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src22_1.ximg exists
[Mon May 21 11:53:03 2012] Fit fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src22 appears to have run properly
[Mon May 21 11:53:04 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Mon May 21 11:53:04 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Mon May 21 11:53:04 2012] Fit fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Mon May 21 11:53:50 2012] Source 43 is offset by -5.180932 and -8.490931 pixels which is larger than
2 X fitted extent = 1.017379 x 1.017379, not incorporating fit results
[Mon May 21 11:53:50 2012] Vigneting correction estimate = 1.000000
[Mon May 21 11:53:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 11:53:50 2012] Assessing source extent using major
[Mon May 21 11:53:50 2012] Source does appear to be extended
[Mon May 21 11:53:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 09:44:57 2012] XMMSAS src. selection expression = ellipse(28851.100952, 29365.481018, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 23 09:44:57 2012] Writing source region out to fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src43_src.reg
[Wed May 23 09:44:57 2012] Extracting stamp from image fullrun_mos2_xmm0086950201_pi300-10000_cl_sm2.00.img.gz, (295, 301) - (370, 376)
[Wed May 23 09:44:57 2012] XMMSAS bgd. selection expression = annulus(28851.100952, 29365.481018, 1087.500000, 2175.000000, X, Y) && !ellipse(26788.732605, 27519.144440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28523.254000, 30536.022000, 1318.560038, 1318.560038, 0.000000, X, Y) && !ellipse(27005.890106, 28674.196350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26772.540000, 29903.576000, 1256.848036, 1256.848036, 0.000000, X, Y) && !ellipse(29679.138214, 28045.734985, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28073.081787, 28574.393799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26716.952600, 31735.675600, 432.882412, 432.882412, 0.000000, X, Y) && !ellipse(27264.552000, 31032.270000, 2835.312082, 2835.312082, 0.000000, X, Y) && !ellipse(26062.558197, 30931.348267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26574.471741, 30918.144806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29193.200000, 27120.295800, 1185.040034, 1185.040034, 0.000000, X, Y) && !ellipse(28785.054443, 31700.459808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28053.703620, 32398.522000, 1417.656041, 1417.656041, 0.000000, X, Y) && !ellipse(25976.235229, 32323.276581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28115.944580, 31876.966156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30086.032000, 26831.022000, 2370.080068, 2320.016067, 0.000000, X, Y)
[Wed May 23 09:44:57 2012] Writing fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src43.gif
[Wed May 23 10:06:13 2012] Mean detx,y = (-2766.42, 484.56) 
[Wed May 23 10:06:15 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 10:06:34 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 10:06:35 2012] Setting source spectrum file to fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed May 23 10:06:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Wed May 23 11:33:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 23 11:33:50 2012] rmf not generated due to insufficient counts
[Wed May 23 12:06:46 2012] Updating aperture counts using extracted products
[Wed May 23 12:06:46 2012] Error reading totcts from fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed May 23 12:06:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 12:06:48 2012] Using photon index=1.80, rate=0.00946, arf fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src43.arf
[Wed May 23 12:06:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 12:06:48 2012] Updating source flux to 9.6e-14
[Wed May 23 12:16:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting