[Sun May 20 10:43:08 2012] Detection parameters:
  Position = (325.6, 379.9) = 13 47 22.73 -32 47 25.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 210.1 +/- 25.3
  Background counts = 348.0
  Rate = 0.009 +/- 0.001

[Sun May 20 10:43:09 2012] Off-axis axis estimate = 6.22'
[Sun May 20 21:37:44 2012] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Sun May 20 21:37:44 2012] Initial guess for spatial extent in simple fitting = 9.54"
[Sun May 20 21:37:44 2012] source mask rpix=2.2, npix_max = 29, mask sum = 22, frac = 0.758
[Sun May 20 21:37:44 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 9.54"
[Mon May 21 01:02:08 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src28.ximg exists
[Mon May 21 01:02:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src28.csv
[Mon May 21 01:02:08 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src28_1.ximg exists
[Mon May 21 01:02:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src28.csv
[Mon May 21 01:02:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 01:02:10 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Mon May 21 01:02:10 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Mon May 21 01:02:10 2012] Fit fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Mon May 21 01:02:58 2012] Warning, spatial fit 28 centroid is now closest to src. 28
[Mon May 21 01:02:58 2012] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 15.497260 pixels away
[Mon May 21 01:02:58 2012] Vigneting correction estimate = 1.000000
[Mon May 21 01:02:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 01:02:58 2012] Assessing source extent using major
[Mon May 21 01:02:58 2012] Source does appear to be extended
[Mon May 21 01:02:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 01:02:58 2012] Source is confused with source 37
[Mon May 21 09:04:23 2012] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Mon May 21 09:04:23 2012] Initial guess for spatial extent in simple fitting = 9.54"
[Mon May 21 09:04:23 2012] source mask rpix=2.2, npix_max = 29, mask sum = 22, frac = 0.758
[Mon May 21 09:04:23 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 9.54"
[Mon May 21 11:53:03 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src23.ximg exists
[Mon May 21 11:53:03 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src23_1.ximg exists
[Mon May 21 11:53:03 2012] Fit fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src23 appears to have run properly
[Mon May 21 11:53:04 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Mon May 21 11:53:04 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Mon May 21 11:53:04 2012] Fit fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Mon May 21 11:53:50 2012] Source 32 is offset by 2.528238 and -0.576389 pixels which is larger than
2 X fitted extent = 1.481099 x 1.481099, not incorporating fit results
[Mon May 21 11:53:50 2012] Vigneting correction estimate = 1.000000
[Mon May 21 11:53:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 11:53:50 2012] Assessing source extent using major
[Mon May 21 11:53:50 2012] Source does appear to be extended
[Mon May 21 11:53:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 09:44:57 2012] XMMSAS src. selection expression = ellipse(28281.238739, 33000.178955, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 23 09:44:57 2012] Writing source region out to fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src32_src.reg
[Wed May 23 09:44:57 2012] Extracting stamp from image fullrun_mos2_xmm0086950201_pi300-10000_cl_sm2.00.img.gz, (288, 342) - (363, 417)
[Wed May 23 09:44:57 2012] XMMSAS bgd. selection expression = annulus(28281.238739, 33000.178955, 1087.500000, 2175.000000, X, Y) && !ellipse(28523.254000, 30536.022000, 1318.560038, 1318.560038, 0.000000, X, Y) && !ellipse(26772.540000, 29903.576000, 1256.848036, 1256.848036, 0.000000, X, Y) && !ellipse(25097.820000, 29612.436000, 1246.928036, 1246.928036, 0.000000, X, Y) && !ellipse(26716.952600, 31735.675600, 432.882412, 432.882412, 0.000000, X, Y) && !ellipse(27264.552000, 31032.270000, 2835.312082, 2835.312082, 0.000000, X, Y) && !ellipse(26062.558197, 30931.348267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26574.471741, 30918.144806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25636.564056, 30638.679077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28785.054443, 31700.459808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25339.360077, 32508.698517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28053.703620, 32398.522000, 1417.656041, 1417.656041, 0.000000, X, Y) && !ellipse(25976.235229, 32323.276581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28115.944580, 31876.966156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26921.197327, 32653.732147, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 23 09:44:57 2012] Writing fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src32.gif
[Wed May 23 10:06:45 2012] Mean detx,y = (-3602.31, 4039.61) 
[Wed May 23 10:06:48 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 10:07:05 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 10:07:06 2012] Setting source spectrum file to fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed May 23 10:07:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Wed May 23 11:34:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 23 11:34:01 2012] rmf not generated due to insufficient counts
[Wed May 23 12:06:46 2012] Updating aperture counts using extracted products
[Wed May 23 12:06:46 2012] Error reading totcts from fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed May 23 12:06:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 12:06:48 2012] Using photon index=1.80, rate=0.00918, arf fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src32.arf
[Wed May 23 12:06:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 12:06:48 2012] Updating source flux to 1.4e-13
[Wed May 23 12:16:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting