[Sun May 20 10:43:07 2012] Detection parameters:
  Position = (300.1, 356.1) = 13 47 31.53 -32 49 16.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 441.3 +/- 38.3
  Background counts = 542.4
  Rate = 0.02 +/- 0.001

[Sun May 20 10:43:09 2012] Off-axis axis estimate = 4.18'
[Sun May 20 21:37:44 2012] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting
[Sun May 20 21:37:44 2012] Initial guess for spatial extent in simple fitting = 8.52"
[Sun May 20 21:37:44 2012] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.745
[Sun May 20 21:37:44 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 8.52"
[Mon May 21 01:02:08 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src16.ximg exists
[Mon May 21 01:02:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src16.csv
[Mon May 21 01:02:08 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src16_1.ximg exists
[Mon May 21 01:02:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src16.csv
[Mon May 21 01:02:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 01:02:09 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Mon May 21 01:02:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src16.csv
[Mon May 21 01:02:09 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Mon May 21 01:02:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src16.csv
[Mon May 21 01:02:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 01:02:58 2012] Warning, spatial fit 16 centroid is now closest to src. 17
[Mon May 21 01:02:58 2012] Vigneting correction estimate = 1.000000
[Mon May 21 01:02:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 01:02:58 2012] Assessing source extent using major
[Mon May 21 01:02:58 2012] Source does appear to be extended
[Mon May 21 01:02:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 01:02:58 2012] Source is confused with source 15
[Mon May 21 01:02:58 2012] Source is confused with source 17
[Mon May 21 09:04:23 2012] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting
[Mon May 21 09:04:23 2012] Initial guess for spatial extent in simple fitting = 8.52"
[Mon May 21 09:04:23 2012] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.745
[Mon May 21 09:04:23 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 8.52"
[Mon May 21 11:53:03 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src13.ximg exists
[Mon May 21 11:53:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src13.csv
[Mon May 21 11:53:03 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon May 21 11:53:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src13.csv
[Mon May 21 11:53:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 11:53:04 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon May 21 11:53:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Mon May 21 11:53:04 2012] fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon May 21 11:53:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Mon May 21 11:53:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 11:53:50 2012] Warning, spatial fit 13 centroid is now closest to src. 15
[Mon May 21 11:53:50 2012] Spatial fit model total counts = 8466.260000, observed total counts = 7230.000000
[Mon May 21 11:53:50 2012] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 21 11:53:50 2012] Vigneting correction estimate = 1.000000
[Mon May 21 11:53:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 11:53:50 2012] Assessing source extent using major
[Mon May 21 11:53:50 2012] Source does appear to be extended
[Mon May 21 11:53:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 09:44:57 2012] XMMSAS src. selection expression = ellipse(26062.558197, 30931.348267, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 23 09:44:57 2012] Writing source region out to fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src16_src.reg
[Wed May 23 09:44:57 2012] Extracting stamp from image fullrun_mos2_xmm0086950201_pi300-10000_cl_sm2.00.img.gz, (263, 319) - (338, 394)
[Wed May 23 09:44:57 2012] XMMSAS bgd. selection expression = annulus(26062.558197, 30931.348267, 1087.500000, 2175.000000, X, Y) && !ellipse(28523.254000, 30536.022000, 1318.560038, 1318.560038, 0.000000, X, Y) && !ellipse(27005.890106, 28674.196350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26772.540000, 29903.576000, 1256.848036, 1256.848036, 0.000000, X, Y) && !ellipse(25097.820000, 29612.436000, 1246.928036, 1246.928036, 0.000000, X, Y) && !ellipse(29679.138214, 28045.734985, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28073.081787, 28574.393799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26716.952600, 31735.675600, 432.882412, 432.882412, 0.000000, X, Y) && !ellipse(27264.552000, 31032.270000, 2835.312082, 2835.312082, 0.000000, X, Y) && !ellipse(26574.471741, 30918.144806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25636.564056, 30638.679077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28785.054443, 31700.459808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24657.498108, 28490.147064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28851.100952, 29365.481018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28281.238739, 33000.178955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25339.360077, 32508.698517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28053.703620, 32398.522000, 1417.656041, 1417.656041, 0.000000, X, Y) && !ellipse(25976.235229, 32323.276581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28115.944580, 31876.966156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26921.197327, 32653.732147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23218.368000, 32595.821200, 1190.632034, 1190.632034, 0.000000, X, Y) && !ellipse(30086.032000, 26831.022000, 2370.080068, 2320.016067, 0.000000, X, Y)
[Wed May 23 09:44:57 2012] Writing fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src16.gif
[Wed May 23 10:01:09 2012] Mean detx,y = (-852.81, 2924.44) 
[Wed May 23 10:01:11 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 10:01:29 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 10:01:30 2012] Setting source spectrum file to fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed May 23 10:01:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed May 23 11:19:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 23 11:19:32 2012] rmf not generated due to insufficient counts
[Wed May 23 12:06:46 2012] Updating aperture counts using extracted products
[Wed May 23 12:06:46 2012] Error reading totcts from fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed May 23 12:06:47 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 12:06:47 2012] Using photon index=1.80, rate=0.0169, arf fullrun_mos2_xmm0086950201_pi300-10000_pass1_cl_src16.arf
[Wed May 23 12:06:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 12:06:47 2012] Updating source flux to 2.1e-13
[Wed May 23 12:16:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting