[Sun May 20 10:42:26 2012] Detection parameters:
  Position = (295.6, 304.1) = 13 47 33.08 -32 53 0.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 872.3 +/- 51.4
  Background counts = 558.8
  Rate = 0.03 +/- 0.002

[Sun May 20 10:42:28 2012] Off-axis axis estimate = 0.46'
[Sun May 20 17:24:52 2012] Using EEF radius (= 6.66 ")to estimate initial spatial extent for simple fitting
[Sun May 20 17:24:52 2012] Initial guess for spatial extent in simple fitting = 6.66"
[Sun May 20 17:24:52 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.970
[Sun May 20 17:24:52 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 6.66"
[Sun May 20 21:37:41 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src9.ximg exists
[Sun May 20 21:37:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src9.csv
[Sun May 20 21:37:41 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun May 20 21:37:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src9.csv
[Sun May 20 21:37:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 21:37:43 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun May 20 21:37:43 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun May 20 21:37:43 2012] Fit fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Mon May 21 01:02:40 2012] Source 9 is offset by -5.218655 and -7.051607 pixels which is larger than
2 X fitted extent = 2.083324 x 2.083324, not incorporating fit results
[Mon May 21 01:02:40 2012] Spatial fit model total counts = 5953.310000, observed total counts = 5953.000000
[Mon May 21 01:02:40 2012] Offset between fit and detection position for source 9 = 6.078151 pixels
[Mon May 21 01:02:40 2012] Warning, changing simple spatial fit ID from 9 to 48
[Mon May 21 01:02:40 2012] 6010.018000 total counts/ 5785.790000 bgd. counts: snr = 2.947871
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 6.078151 pixels
  Position = (299.2, 299.2) = 13 47 31.85 -32 53 20.7
  Extent = 13.4 (13.4-26.8)", rotation angle = 0
  Source counts = 224.2 +/- 77.5
  Background counts = 5785.8
  Rate = 0.007 +/- 0.002
[Mon May 21 01:02:40 2012] Vigneting correction estimate = 1.000000
[Mon May 21 01:02:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 01:02:40 2012] Assessing source extent using major axis lower bound
[Mon May 21 01:02:40 2012] Source does appear to be extended
[Mon May 21 01:02:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 01:02:40 2012] Source is confused with source 20
[Mon May 21 01:02:40 2012] Source is confused with source 52
[Mon May 21 01:02:40 2012] Source is confused with source 51
[Mon May 21 04:51:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 21 04:51:07 2012] Initial guess for spatial extent in simple fitting = 13.39"
[Mon May 21 04:51:07 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.957
[Mon May 21 04:51:07 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 13.39"
[Mon May 21 09:04:21 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src9.ximg exists
[Mon May 21 09:04:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src9.csv
[Mon May 21 09:04:21 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon May 21 09:04:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src9.csv
[Mon May 21 09:04:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 09:04:22 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon May 21 09:04:22 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon May 21 09:04:22 2012] Fit fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon May 21 11:53:38 2012] Warning, spatial fit 9 centroid is now closest to src. 19
[Mon May 21 11:53:38 2012] Vigneting correction estimate = 1.000000
[Mon May 21 11:53:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 11:53:38 2012] Assessing source extent using major axis lower bound
[Mon May 21 11:53:38 2012] Source does appear to be extended
[Mon May 21 11:53:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 05:03:43 2012] XMMSAS src. selection expression = ellipse(25982.234000, 25977.920000, 803.130023, 803.130023, 0.000000, X, Y)
[Wed May 23 05:03:43 2012] Writing source region out to fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src9_src.reg
[Wed May 23 05:03:43 2012] Extracting stamp from image fullrun_mos1_xmm0086950201_pi300-10000_cl_sm2.00.img.gz, (253, 253) - (345, 345)
[Wed May 23 05:03:43 2012] XMMSAS bgd. selection expression = annulus(25982.234000, 25977.920000, 1338.550039, 2677.100077, X, Y) && !ellipse(26728.975200, 27730.070000, 1183.320034, 1183.320034, 0.000000, X, Y) && !ellipse(26588.896515, 28136.858246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29770.252000, 30362.570000, 1815.680052, 1417.368041, -0.000000, X, Y) && !ellipse(26833.831600, 29037.158000, 1420.568041, 1420.568041, 0.000000, X, Y) && !ellipse(25481.034000, 29684.613200, 1282.416037, 755.098422, 338.333000, X, Y) && !ellipse(29083.001831, 26967.041718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28463.880600, 29701.866000, 1369.752039, 1369.752039, 0.000000, X, Y) && !ellipse(28951.214000, 29947.254000, 1369.752039, 1369.752039, 0.000000, X, Y) && !ellipse(28702.544098, 27269.476105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28584.796000, 31151.451400, 2880.976083, 929.912027, 335.722000, X, Y) && !ellipse(27200.376312, 25807.648834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26503.680000, 26089.734000, 2160.448062, 2160.448062, 0.000000, X, Y) && !ellipse(28722.860382, 28137.622894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27652.322000, 25320.234000, 1114.528032, 1114.528032, 0.000000, X, Y) && !ellipse(26317.812000, 25249.732000, 1081.536031, 1081.536031, 0.000000, X, Y) && !ellipse(29528.246000, 28849.547600, 1315.800038, 1315.800038, 0.000000, X, Y) && !ellipse(27465.523000, 24869.006000, 1059.720030, 1059.720030, 0.000000, X, Y) && !ellipse(25538.390000, 24413.524000, 1107.152032, 1107.152032, 0.000000, X, Y) && !ellipse(25917.204000, 25186.416000, 2105.792061, 812.136023, 162.633000, X, Y)
[Wed May 23 05:03:43 2012] Writing fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src9.gif
[Wed May 23 05:37:42 2012] Mean detx,y = (-1326.12, -1227.50) 
[Wed May 23 05:37:45 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 05:38:02 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 05:38:03 2012] Setting source spectrum file to fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed May 23 05:38:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed May 23 12:06:40 2012] Updating aperture counts using extracted products
[Wed May 23 12:06:40 2012] Error reading totcts from fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed May 23 12:06:43 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 12:06:43 2012] Using photon index=1.80, rate=0.007, arf fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src9.arf
[Wed May 23 12:06:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 12:06:43 2012] Updating source flux to 7e-14
[Wed May 23 12:06:50 2012] Flag b found in src. 9 procflags, skipping spectral fitting
[Wed May 23 12:06:50 2012] Flag c found in src. 9 procflags, skipping spectral fitting