[Sun May 20 10:42:28 2012] Detection parameters:
  Position = (300.3, 285.0) = 13 47 31.48 -32 54 22.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.5 +/- 31.5
  Background counts = 439.2
  Rate = 0.005 +/- 0.001

[Sun May 20 10:42:28 2012] Off-axis axis estimate = 0.98'
[Sun May 20 17:24:52 2012] Using EEF radius (= 6.92 ")to estimate initial spatial extent for simple fitting
[Sun May 20 17:24:52 2012] Initial guess for spatial extent in simple fitting = 6.92"
[Sun May 20 17:24:52 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.915
[Sun May 20 17:24:52 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 6.92"
[Sun May 20 21:37:42 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src47.ximg exists
[Sun May 20 21:37:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src47.csv
[Sun May 20 21:37:42 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src47_1.ximg exists
[Sun May 20 21:37:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src47.csv
[Sun May 20 21:37:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 21:37:44 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Sun May 20 21:37:44 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Sun May 20 21:37:44 2012] Fit fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Mon May 21 01:02:40 2012] Source 54 is offset by 5.590040 and 4.187705 pixels which is larger than
2 X fitted extent = 4.408442 x 4.408442, not incorporating fit results
[Mon May 21 01:02:40 2012] Vigneting correction estimate = 1.000000
[Mon May 21 01:02:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 01:02:40 2012] Assessing source extent using major
[Mon May 21 01:02:40 2012] Source does appear to be extended
[Mon May 21 01:02:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 01:02:40 2012] Source is confused with source 52
[Mon May 21 04:51:07 2012] Using EEF radius (= 6.92 ")to estimate initial spatial extent for simple fitting
[Mon May 21 04:51:07 2012] Initial guess for spatial extent in simple fitting = 6.92"
[Mon May 21 04:51:07 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.915
[Mon May 21 04:51:07 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 6.92"
[Mon May 21 09:04:22 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src40.ximg exists
[Mon May 21 09:04:22 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src40_1.ximg exists
[Mon May 21 09:04:22 2012] Fit fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src40 appears to have run properly
[Mon May 21 09:04:23 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Mon May 21 09:04:23 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Mon May 21 09:04:23 2012] Fit fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Mon May 21 11:53:38 2012] Spatial fit model total counts = 5380.570000, observed total counts = 5376.000000
[Mon May 21 11:53:38 2012] Offset between fit and detection position for source 54 = 7.250460 pixels
[Mon May 21 11:53:38 2012] 5455.314000 total counts/ 5251.880000 bgd. counts: snr = 2.807153
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 7.250460 pixels
  Position = (294.1, 281.2) = 13 47 33.61 -32 54 38.9
  Extent = 13.8 (13.8-27.7)", rotation angle = 0
  Source counts = 203.4 +/- 73.9
  Background counts = 5251.9
  Rate = 0.006 +/- 0.002
[Mon May 21 11:53:38 2012] Vigneting correction estimate = 1.000000
[Mon May 21 11:53:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 11:53:38 2012] Assessing source extent using major axis lower bound
[Mon May 21 11:53:38 2012] Source does appear to be extended
[Mon May 21 11:53:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 05:03:45 2012] XMMSAS src. selection expression = ellipse(25538.390000, 24413.524000, 830.364024, 830.364024, 0.000000, X, Y)
[Wed May 23 05:03:45 2012] Writing source region out to fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src54_src.reg
[Wed May 23 05:03:45 2012] Extracting stamp from image fullrun_mos1_xmm0086950201_pi300-10000_cl_sm2.00.img.gz, (246, 233) - (342, 329)
[Wed May 23 05:03:45 2012] XMMSAS bgd. selection expression = annulus(25538.390000, 24413.524000, 1383.940040, 2767.880080, X, Y) && !ellipse(26728.975200, 27730.070000, 1183.320034, 1183.320034, 0.000000, X, Y) && !ellipse(25982.234000, 25977.920000, 1070.840031, 1070.840031, 0.000000, X, Y) && !ellipse(29083.001831, 26967.041718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28702.544098, 27269.476105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27200.376312, 25807.648834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26503.680000, 26089.734000, 2160.448062, 2160.448062, 0.000000, X, Y) && !ellipse(27652.322000, 25320.234000, 1114.528032, 1114.528032, 0.000000, X, Y) && !ellipse(26317.812000, 25249.732000, 1081.536031, 1081.536031, 0.000000, X, Y) && !ellipse(27465.523000, 24869.006000, 1059.720030, 1059.720030, 0.000000, X, Y) && !ellipse(25917.204000, 25186.416000, 2105.792061, 812.136023, 162.633000, X, Y)
[Wed May 23 05:03:45 2012] Writing fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src54.gif
[Wed May 23 05:54:37 2012] Mean detx,y = (-2620.75, -2237.18) 
[Wed May 23 05:54:40 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 05:55:00 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 05:55:00 2012] Setting source spectrum file to fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Wed May 23 05:55:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Wed May 23 12:06:42 2012] Updating aperture counts using extracted products
[Wed May 23 12:06:42 2012] Error reading totcts from fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Wed May 23 12:06:44 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 12:06:44 2012] Using photon index=1.80, rate=0.00635, arf fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src54.arf
[Wed May 23 12:06:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 12:06:44 2012] Updating source flux to 6.7e-14
[Wed May 23 12:06:50 2012] Flag b found in src. 54 procflags, skipping spectral fitting
[Wed May 23 12:06:50 2012] Flag c found in src. 54 procflags, skipping spectral fitting