[Sun May 20 10:42:27 2012] Detection parameters:
  Position = (304.6, 374.4) = 13 47 30.00 -32 48 1.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 300.9 +/- 35.6
  Background counts = 401.4
  Rate = 0.01 +/- 0.002

[Sun May 20 10:42:28 2012] Off-axis axis estimate = 5.53'
[Sun May 20 17:24:52 2012] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Sun May 20 17:24:52 2012] Initial guess for spatial extent in simple fitting = 9.19"
[Sun May 20 17:24:52 2012] source mask rpix=2.1, npix_max = 27, mask sum = 19, frac = 0.696
[Sun May 20 17:24:52 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 9.19"
[Sun May 20 21:37:41 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src24.ximg exists
[Sun May 20 21:37:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src24.csv
[Sun May 20 21:37:41 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src24_1.ximg exists
[Sun May 20 21:37:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src24.csv
[Sun May 20 21:37:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 21:37:43 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sun May 20 21:37:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sun May 20 21:37:43 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sun May 20 21:37:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sun May 20 21:37:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 01:02:40 2012] Warning, spatial fit 24 centroid is now closest to src. 34
[Mon May 21 01:02:40 2012] Vigneting correction estimate = 1.000000
[Mon May 21 01:02:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 01:02:40 2012] Assessing source extent using major
[Mon May 21 01:02:40 2012] Source does appear to be extended
[Mon May 21 01:02:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 04:51:07 2012] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Mon May 21 04:51:07 2012] Initial guess for spatial extent in simple fitting = 9.19"
[Mon May 21 04:51:07 2012] source mask rpix=2.1, npix_max = 27, mask sum = 19, frac = 0.696
[Mon May 21 04:51:07 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 9.19"
[Mon May 21 09:04:22 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src23.ximg exists
[Mon May 21 09:04:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src23.csv
[Mon May 21 09:04:22 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src23_1.ximg exists
[Mon May 21 09:04:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src23.csv
[Mon May 21 09:04:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 09:04:23 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Mon May 21 09:04:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src23.csv
[Mon May 21 09:04:23 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Mon May 21 09:04:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src23.csv
[Mon May 21 09:04:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 11:53:38 2012] Warning, spatial fit 23 centroid is now closest to src. 34
[Mon May 21 11:53:38 2012] Vigneting correction estimate = 1.000000
[Mon May 21 11:53:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 11:53:38 2012] Assessing source extent using major
[Mon May 21 11:53:38 2012] Source does appear to be extended
[Mon May 21 11:53:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 05:03:44 2012] XMMSAS src. selection expression = ellipse(26448.312714, 32527.174866, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 23 05:03:44 2012] Writing source region out to fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src35_src.reg
[Wed May 23 05:03:44 2012] Extracting stamp from image fullrun_mos1_xmm0086950201_pi300-10000_cl_sm2.00.img.gz, (267, 337) - (342, 412)
[Wed May 23 05:03:44 2012] XMMSAS bgd. selection expression = annulus(26448.312714, 32527.174866, 1087.500000, 2175.000000, X, Y) && !ellipse(28837.224000, 31550.930000, 2844.320082, 2844.320082, 0.000000, X, Y) && !ellipse(29770.252000, 30362.570000, 1815.680052, 1417.368041, -0.000000, X, Y) && !ellipse(26833.831600, 29037.158000, 1420.568041, 1420.568041, 0.000000, X, Y) && !ellipse(26242.056763, 29855.806519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26475.586400, 30210.964400, 875.208025, 875.208025, 0.000000, X, Y) && !ellipse(26775.000000, 30344.278000, 1335.400038, 1335.400038, 0.000000, X, Y) && !ellipse(25481.034000, 29684.613200, 1282.416037, 755.098422, 338.333000, X, Y) && !ellipse(26176.984600, 30792.130000, 1372.968040, 1372.968040, 0.000000, X, Y) && !ellipse(28463.880600, 29701.866000, 1369.752039, 1369.752039, 0.000000, X, Y) && !ellipse(28951.214000, 29947.254000, 1369.752039, 1369.752039, 0.000000, X, Y) && !ellipse(28584.796000, 31151.451400, 2880.976083, 929.912027, 335.722000, X, Y) && !ellipse(25660.342499, 32202.255035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26207.517487, 31175.634857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27739.795959, 30748.554810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27045.619965, 32808.018555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27663.482452, 31435.687012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25003.180267, 29612.268646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28161.070000, 31044.652000, 1440.488041, 1440.488041, 0.000000, X, Y) && !ellipse(28130.974701, 33234.721588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27836.109802, 31886.163177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28842.920600, 33717.958800, 972.256028, 972.256028, 0.000000, X, Y) && !ellipse(27913.153200, 35085.788000, 1620.024047, 1620.024047, 0.000000, X, Y)
[Wed May 23 05:03:44 2012] Writing fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src35.gif
[Wed May 23 05:47:05 2012] Mean detx,y = (4508.71, 1613.22) 
[Wed May 23 05:47:07 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 05:47:22 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 05:47:23 2012] Setting source spectrum file to fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Wed May 23 05:47:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Wed May 23 08:41:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 23 08:41:15 2012] rmf not generated due to insufficient counts
[Wed May 23 12:06:41 2012] Updating aperture counts using extracted products
[Wed May 23 12:06:41 2012] Error reading totcts from fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Wed May 23 12:06:43 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 12:06:43 2012] Using photon index=1.80, rate=0.0129, arf fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src35.arf
[Wed May 23 12:06:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 12:06:44 2012] Updating source flux to 1.6e-13
[Wed May 23 12:06:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting