[Sun May 20 10:42:27 2012] Detection parameters: Position = (331.5, 389.0) = 13 47 20.71 -32 46 46.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 140.9 +/- 26.3 Background counts = 263.8 Rate = 0.005 +/- 0.001 [Sun May 20 10:42:28 2012] Off-axis axis estimate = 6.99' [Sun May 20 17:24:52 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting [Sun May 20 17:24:52 2012] Initial guess for spatial extent in simple fitting = 9.92" [Sun May 20 17:24:52 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.970 [Sun May 20 17:24:52 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 9.92" [Sun May 20 21:37:42 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src44.ximg exists [Sun May 20 21:37:42 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src44_1.ximg exists [Sun May 20 21:37:42 2012] Fit fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src44 appears to have run properly [Sun May 20 21:37:44 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src44.ximg exists [Sun May 20 21:37:44 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists [Sun May 20 21:37:44 2012] Fit fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly [Mon May 21 01:02:40 2012] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 12.017296 pixels away [Mon May 21 01:02:40 2012] Spatial fit model total counts = 3187.360000, observed total counts = 3076.000000 [Mon May 21 01:02:40 2012] Offset between fit and detection position for source 30 = 1.069893 pixels [Mon May 21 01:02:40 2012] 2974.098000 total counts/ 2775.430000 bgd. counts: snr = 3.771054 Spatial fit parameters: Offset between fit and detection position for source 30 = 1.069893 pixels Position = (332.1, 388.1) = 13 47 20.50 -32 46 53.6 Extent = 12.2 (4.2-19.8)", rotation angle = 0 Source counts = 198.7 +/- 54.5 Background counts = 2775.4 Rate = 0.006 +/- 0.002 [Mon May 21 01:02:40 2012] Vigneting correction estimate = 1.000000 [Mon May 21 01:02:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 21 01:02:40 2012] Assessing source extent using major axis lower bound [Mon May 21 01:02:40 2012] Source does appear to be extended [Mon May 21 01:02:40 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 21 04:51:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Mon May 21 04:51:07 2012] Initial guess for spatial extent in simple fitting = 12.15" [Mon May 21 04:51:07 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.830 [Mon May 21 04:51:07 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 12.15" [Mon May 21 09:04:22 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src39.ximg exists [Mon May 21 09:04:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src39.csv [Mon May 21 09:04:22 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src39_1.ximg exists [Mon May 21 09:04:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src39.csv [Mon May 21 09:04:22 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src39_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 21 09:04:23 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src39.ximg exists [Mon May 21 09:04:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src39.csv [Mon May 21 09:04:23 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists [Mon May 21 09:04:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src39.csv [Mon May 21 09:04:23 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src39_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 21 11:53:38 2012] Warning, spatial fit 39 centroid is now closest to src. 32 [Mon May 21 11:53:38 2012] Vigneting correction estimate = 1.000000 [Mon May 21 11:53:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 21 11:53:38 2012] Assessing source extent using major axis lower bound [Mon May 21 11:53:38 2012] Source does appear to be extended [Mon May 21 11:53:38 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 23 05:03:45 2012] XMMSAS src. selection expression = ellipse(28842.920600, 33717.958800, 729.192021, 729.192021, 0.000000, X, Y) [Wed May 23 05:03:45 2012] Writing source region out to fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src30_src.reg [Wed May 23 05:03:45 2012] Extracting stamp from image fullrun_mos1_xmm0086950201_pi300-10000_cl_sm2.00.img.gz, (290, 346) - (374, 430) [Wed May 23 05:03:45 2012] XMMSAS bgd. selection expression = annulus(28842.920600, 33717.958800, 1215.320035, 2430.640070, X, Y) && !ellipse(28837.224000, 31550.930000, 2844.320082, 2844.320082, 0.000000, X, Y) && !ellipse(29770.252000, 30362.570000, 1815.680052, 1417.368041, -0.000000, X, Y) && !ellipse(26775.000000, 30344.278000, 1335.400038, 1335.400038, 0.000000, X, Y) && !ellipse(26176.984600, 30792.130000, 1372.968040, 1372.968040, 0.000000, X, Y) && !ellipse(28951.214000, 29947.254000, 1369.752039, 1369.752039, 0.000000, X, Y) && !ellipse(28584.796000, 31151.451400, 2880.976083, 929.912027, 335.722000, X, Y) && !ellipse(25660.342499, 32202.255035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26207.517487, 31175.634857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27739.795959, 30748.554810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26448.312714, 32527.174866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27045.619965, 32808.018555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27663.482452, 31435.687012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28161.070000, 31044.652000, 1440.488041, 1440.488041, 0.000000, X, Y) && !ellipse(28130.974701, 33234.721588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27836.109802, 31886.163177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27913.153200, 35085.788000, 1620.024047, 1620.024047, 0.000000, X, Y) [Wed May 23 05:03:45 2012] Writing fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src30.gif [Wed May 23 05:53:46 2012] Mean detx,y = (4720.26, 4234.52) [Wed May 23 05:53:49 2012] Setting backscal keywords in source and bgd. spectrum [Wed May 23 05:54:25 2012] Binned source spectrum to 10 counts/bin [Wed May 23 05:54:25 2012] Setting source spectrum file to fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src30_src_b10.pi.gz [Wed May 23 05:54:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src30_bgd.pi.gz [Wed May 23 12:06:42 2012] Updating aperture counts using extracted products [Wed May 23 12:06:42 2012] Error reading totcts from fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src30_src_b10.pi.gz [Wed May 23 12:06:44 2012] Calculating source flux in energy range 0.30-8.00 [Wed May 23 12:06:44 2012] Using photon index=1.80, rate=0.0062, arf fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src30.arf [Wed May 23 12:06:44 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 23 12:06:44 2012] Updating source flux to 7.6e-14