[Sun May 20 10:42:26 2012] Detection parameters:
  Position = (303.1, 354.8) = 13 47 30.52 -32 49 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 600.8 +/- 47.4
  Background counts = 584.2
  Rate = 0.02 +/- 0.002

[Sun May 20 10:42:28 2012] Off-axis axis estimate = 4.10'
[Sun May 20 17:24:52 2012] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Sun May 20 17:24:52 2012] Initial guess for spatial extent in simple fitting = 8.48"
[Sun May 20 17:24:52 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.042
[Sun May 20 17:24:52 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 8.48"
[Sun May 20 21:37:41 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src12.ximg exists
[Sun May 20 21:37:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src12.csv
[Sun May 20 21:37:41 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun May 20 21:37:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src12.csv
[Sun May 20 21:37:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 21:37:43 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun May 20 21:37:43 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun May 20 21:37:43 2012] Fit fullrun_mos1_xmm0086950201_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Mon May 21 01:02:40 2012] Warning, spatial fit 12 centroid is now closest to src. 39
[Mon May 21 01:02:40 2012] Vigneting correction estimate = 1.000000
[Mon May 21 01:02:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 01:02:40 2012] Assessing source extent using major
[Mon May 21 01:02:40 2012] Source does appear to be extended
[Mon May 21 01:02:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 01:02:40 2012] Source is confused with source 4
[Mon May 21 04:51:07 2012] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Mon May 21 04:51:07 2012] Initial guess for spatial extent in simple fitting = 8.48"
[Mon May 21 04:51:07 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.042
[Mon May 21 04:51:07 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 8.48"
[Mon May 21 09:04:21 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src11.ximg exists
[Mon May 21 09:04:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src11.csv
[Mon May 21 09:04:21 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon May 21 09:04:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src11.csv
[Mon May 21 09:04:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 09:04:22 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon May 21 09:04:22 2012] fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon May 21 09:04:22 2012] Fit fullrun_mos1_xmm0086950201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon May 21 11:53:38 2012] Warning, spatial fit 11 centroid is now closest to src. 39
[Mon May 21 11:53:38 2012] Spatial fit model total counts = 8482.650000, observed total counts = 8327.000000
[Mon May 21 11:53:38 2012] Offset between fit and detection position for source 12 = 1.645381 pixels
[Mon May 21 11:53:38 2012] Warning, changing simple spatial fit ID from 11 to 21
[Mon May 21 11:53:38 2012] 8231.224000 total counts/ 7731.280000 bgd. counts: snr = 5.685853
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 1.645381 pixels
  Position = (301.4, 354.5) = 13 47 31.07 -32 49 20.0
  Extent = 17.2 (17.0-17.2)", rotation angle = 0
  Source counts = 499.9 +/- 90.7
  Background counts = 7731.3
  Rate = 0.02 +/- 0.003
[Mon May 21 11:53:38 2012] Vigneting correction estimate = 1.000000
[Mon May 21 11:53:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 11:53:38 2012] Assessing source extent using major axis lower bound
[Mon May 21 11:53:38 2012] Source does appear to be extended
[Mon May 21 11:53:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 05:03:43 2012] XMMSAS src. selection expression = ellipse(26176.984600, 30792.130000, 1029.726030, 1029.726030, 0.000000, X, Y)
[Wed May 23 05:03:43 2012] Writing source region out to fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src12_src.reg
[Wed May 23 05:03:43 2012] Extracting stamp from image fullrun_mos1_xmm0086950201_pi300-10000_cl_sm2.00.img.gz, (242, 295) - (361, 414)
[Wed May 23 05:03:43 2012] XMMSAS bgd. selection expression = annulus(26176.984600, 30792.130000, 1716.210049, 3432.420099, X, Y) && !ellipse(26728.975200, 27730.070000, 1183.320034, 1183.320034, 0.000000, X, Y) && !ellipse(28837.224000, 31550.930000, 2844.320082, 2844.320082, 0.000000, X, Y) && !ellipse(26588.896515, 28136.858246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29770.252000, 30362.570000, 1815.680052, 1417.368041, -0.000000, X, Y) && !ellipse(26833.831600, 29037.158000, 1420.568041, 1420.568041, 0.000000, X, Y) && !ellipse(26242.056763, 29855.806519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26475.586400, 30210.964400, 875.208025, 875.208025, 0.000000, X, Y) && !ellipse(26775.000000, 30344.278000, 1335.400038, 1335.400038, 0.000000, X, Y) && !ellipse(25481.034000, 29684.613200, 1282.416037, 755.098422, 338.333000, X, Y) && !ellipse(29083.001831, 26967.041718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28463.880600, 29701.866000, 1369.752039, 1369.752039, 0.000000, X, Y) && !ellipse(28951.214000, 29947.254000, 1369.752039, 1369.752039, 0.000000, X, Y) && !ellipse(28702.544098, 27269.476105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28584.796000, 31151.451400, 2880.976083, 929.912027, 335.722000, X, Y) && !ellipse(25660.342499, 32202.255035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26503.680000, 26089.734000, 2160.448062, 2160.448062, 0.000000, X, Y) && !ellipse(26207.517487, 31175.634857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27739.795959, 30748.554810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26448.312714, 32527.174866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27045.619965, 32808.018555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27663.482452, 31435.687012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28722.860382, 28137.622894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25003.180267, 29612.268646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28161.070000, 31044.652000, 1440.488041, 1440.488041, 0.000000, X, Y) && !ellipse(28130.974701, 33234.721588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29528.246000, 28849.547600, 1315.800038, 1315.800038, 0.000000, X, Y) && !ellipse(27836.109802, 31886.163177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28842.920600, 33717.958800, 972.256028, 972.256028, 0.000000, X, Y) && !ellipse(27913.153200, 35085.788000, 1620.024047, 1620.024047, 0.000000, X, Y)
[Wed May 23 05:03:43 2012] Writing fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src12.gif
[Wed May 23 05:38:48 2012] Mean detx,y = (2886.56, 717.69) 
[Wed May 23 05:38:51 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 05:39:05 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 05:39:06 2012] Setting source spectrum file to fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed May 23 05:39:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Wed May 23 12:06:40 2012] Updating aperture counts using extracted products
[Wed May 23 12:06:40 2012] Error reading totcts from fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed May 23 12:06:43 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 12:06:43 2012] Using photon index=1.80, rate=0.0156, arf fullrun_mos1_xmm0086950201_pi300-10000_pass1_cl_src12.arf
[Wed May 23 12:06:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 12:06:43 2012] Updating source flux to 1.5e-13
[Wed May 23 12:06:50 2012] Flag c found in src. 12 procflags, skipping spectral fitting