[Thu Jul 12 03:33:26 2012] Detection parameters:
  Position = (404.2, 494.1) = 5 25 40.36 -69 46 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.3 +/- 25.6
  Background counts = 143.2
  Rate = 0.003 +/- 0.0006

[Thu Jul 12 03:33:27 2012] Off-axis axis estimate = 16.13'
[Thu Jul 12 03:36:33 2012] Using EEF radius (= 14.49 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 03:36:33 2012] Initial guess for spatial extent in simple fitting = 14.49"
[Thu Jul 12 03:36:33 2012] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.090
[Thu Jul 12 03:36:33 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 14.49"
[Thu Jul 12 05:22:43 2012] fullrun_pn_xmm0086770101_pi300-10000_cl_pass0_src11.ximg exists
[Thu Jul 12 05:22:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086770101_pi300-10000_cl_pass0_src11.csv
[Thu Jul 12 05:22:43 2012] fullrun_pn_xmm0086770101_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Jul 12 05:22:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086770101_pi300-10000_cl_pass0_src11.csv
[Thu Jul 12 05:22:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0086770101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0086770101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 05:22:44 2012] fullrun_pn_xmm0086770101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Jul 12 05:22:44 2012] fullrun_pn_xmm0086770101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Jul 12 05:22:44 2012] Fit fullrun_pn_xmm0086770101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Jul 12 06:31:10 2012] Spatial fit model total counts = 2900.400000, observed total counts = 2848.000000
[Thu Jul 12 06:31:10 2012] Offset between fit and detection position for source 11 = 9.101622 pixels
[Thu Jul 12 06:31:10 2012] 2609.940000 total counts/ 1441.030000 bgd. counts: snr = 30.792473
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 9.101622 pixels
  Position = (398.7, 501.4) = 5 25 44.96 -69 45 48.5
  Extent = 29.0 (28.8-58.0)", rotation angle = 0
  Source counts = 1168.9 +/- 51.1
  Background counts = 1441.0
  Rate = 0.03 +/- 0.001
[Thu Jul 12 06:31:10 2012] Spatial fit model total counts = 2822.660000, observed total counts = 2515.000000
[Thu Jul 12 06:31:10 2012] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 12 06:31:11 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 06:31:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 06:31:11 2012] Assessing source extent using major axis lower bound
[Thu Jul 12 06:31:11 2012] Source does appear to be extended
[Thu Jul 12 06:31:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 06:31:11 2012] Source is confused with source 9
[Thu Jul 12 06:31:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 12 06:31:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 12 06:31:32 2012] Initial guess for spatial extent in simple fitting = 28.98"
[Thu Jul 12 06:31:32 2012] source mask rpix=6.7, npix_max = 205, mask sum = 189, frac = 0.921
[Thu Jul 12 06:31:32 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 28.98"
[Thu Jul 12 08:18:44 2012] fullrun_pn_xmm0086770101_pi300-10000_cl_pass1_src11.ximg exists
[Thu Jul 12 08:18:44 2012] fullrun_pn_xmm0086770101_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Jul 12 08:18:44 2012] Fit fullrun_pn_xmm0086770101_pi300-10000_cl_pass1_src11 appears to have run properly
[Thu Jul 12 08:18:45 2012] fullrun_pn_xmm0086770101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Jul 12 08:18:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086770101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu Jul 12 08:18:45 2012] fullrun_pn_xmm0086770101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jul 12 08:18:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086770101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu Jul 12 08:18:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0086770101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0086770101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 09:10:21 2012] Spatial fit model total counts = 5958.890000, observed total counts = 5787.000000
[Thu Jul 12 09:10:21 2012] Offset between fit and detection position for source 11 = 0.642457 pixels
[Thu Jul 12 09:10:21 2012] 5927.635000 total counts/ 5874.010000 bgd. counts: snr = 0.699681
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.642457 pixels
  Position = (398.3, 500.9) = 5 25 45.28 -69 45 50.8
  Extent = 4.3" x 4.3", rotation angle = 0
  Source counts = 53.6 +/- 77.0
  Background counts = 5874.0
  Rate = 0.001 +/- 0.002
  Deleting source due to low Poisson probability