[Thu Jul 12 03:34:09 2012] Detection parameters:
  Position = (320.6, 286.0) = 5 26 50.23 -70 1 26.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3679.3 +/- 72.1
  Background counts = 32.4
  Rate = 0.08 +/- 0.002

[Thu Jul 12 03:34:10 2012] Off-axis axis estimate = 1.84'
[Thu Jul 12 05:55:45 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 05:55:45 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Thu Jul 12 05:55:45 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.043
[Thu Jul 12 05:55:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.35"
[Thu Jul 12 06:30:57 2012] fullrun_mos2_xmm0086770101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jul 12 06:30:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086770101_pi300-10000_cl_pass0_src1.csv
[Thu Jul 12 06:30:57 2012] fullrun_mos2_xmm0086770101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jul 12 06:30:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086770101_pi300-10000_cl_pass0_src1.csv
[Thu Jul 12 06:30:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086770101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086770101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 06:30:57 2012] fullrun_mos2_xmm0086770101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul 12 06:30:57 2012] fullrun_mos2_xmm0086770101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul 12 06:30:57 2012] Fit fullrun_mos2_xmm0086770101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jul 12 06:31:19 2012] Spatial fit model total counts = 3650.580000, observed total counts = 3423.000000
[Thu Jul 12 06:31:19 2012] Offset between fit and detection position for source 4 = 0.082279 pixels
[Thu Jul 12 06:31:19 2012] 3631.990000 total counts/ 1144.320000 bgd. counts: snr = 73.539221
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.082279 pixels
  Position = (320.6, 286.1) = 5 26 50.26 -70 1 26.3
  Extent = 5.1 (4.9-5.3)", rotation angle = 0
  Source counts = 2487.7 +/- 60.3
  Background counts = 1144.3
  Rate = 0.05 +/- 0.001
[Thu Jul 12 06:31:19 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 06:31:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 06:31:19 2012] Assessing source extent using major axis lower bound
[Thu Jul 12 06:31:19 2012] Source does appear to be extended
[Thu Jul 12 06:31:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 08:43:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 12 08:43:50 2012] Initial guess for spatial extent in simple fitting = 5.12"
[Thu Jul 12 08:43:50 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.066
[Thu Jul 12 08:43:50 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.12"
[Thu Jul 12 09:10:12 2012] fullrun_mos2_xmm0086770101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul 12 09:10:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086770101_pi300-10000_cl_pass1_src1.csv
[Thu Jul 12 09:10:12 2012] fullrun_mos2_xmm0086770101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul 12 09:10:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086770101_pi300-10000_cl_pass1_src1.csv
[Thu Jul 12 09:10:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086770101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086770101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 09:10:12 2012] fullrun_mos2_xmm0086770101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul 12 09:10:12 2012] fullrun_mos2_xmm0086770101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul 12 09:10:12 2012] Fit fullrun_mos2_xmm0086770101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul 12 09:10:27 2012] Spatial fit model total counts = 3654.870000, observed total counts = 3423.000000
[Thu Jul 12 09:10:27 2012] Offset between fit and detection position for source 4 = 0.000053 pixels
[Thu Jul 12 09:10:27 2012] 3636.040000 total counts/ 1150.500000 bgd. counts: snr = 73.278648
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.000053 pixels
  Position = (320.6, 286.1) = 5 26 50.26 -70 1 26.3
  Extent = 5.1 (4.9-5.3)", rotation angle = 0
  Source counts = 2485.5 +/- 60.3
  Background counts = 1150.5
  Rate = 0.05 +/- 0.001
[Thu Jul 12 09:10:27 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 09:10:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 09:10:27 2012] Assessing source extent using major axis lower bound
[Thu Jul 12 09:10:27 2012] Source does appear to be extended
[Thu Jul 12 09:10:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 11:27:47 2012] Counts = 2485.540000, rescaling region sizes by 2.000000
[Thu Jul 12 11:27:47 2012] XMMSAS src. selection expression = ellipse(27840.323600, 24844.256600, 612.826818, 612.826818, 0.000000, X, Y)
[Thu Jul 12 11:27:47 2012] Writing source region out to fullrun_mos2_xmm0086770101_pi300-10000_pass1_cl_src4_src.reg
[Thu Jul 12 11:27:47 2012] Extracting stamp from image fullrun_mos2_xmm0086770101_pi300-10000_cl_sm2.00.img.gz, (285, 251) - (356, 321)
[Thu Jul 12 11:27:47 2012] XMMSAS bgd. selection expression = annulus(27840.323600, 24844.256600, 2042.756059, 4085.512118, X, Y) && !ellipse(26116.725800, 20556.057600, 435.228173, 435.228173, 0.000000, X, Y) && !ellipse(27747.452000, 28735.552000, 363.828810, 363.828810, 0.000000, X, Y) && !ellipse(23686.422300, 22488.496400, 382.519211, 382.519211, 0.000000, X, Y) && !ellipse(30048.359580, 20674.273200, 315.227613, 315.227613, 0.000000, X, Y) && !ellipse(31909.226800, 27585.528200, 359.799210, 359.799210, 0.000000, X, Y) && !ellipse(27540.395600, 22744.322400, 733.169621, 733.169621, 0.000000, X, Y)
[Thu Jul 12 11:27:47 2012] Writing fullrun_mos2_xmm0086770101_pi300-10000_pass1_cl_src4.gif
[Thu Jul 12 11:27:53 2012] Mean detx,y = (-63.88, 174.93) 
[Thu Jul 12 11:27:56 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 11:28:13 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 11:28:15 2012] Setting source spectrum file to fullrun_mos2_xmm0086770101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jul 12 11:28:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0086770101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Jul 12 12:07:21 2012] Updating aperture counts using extracted products
[Thu Jul 12 12:07:21 2012] Error reading totcts from fullrun_mos2_xmm0086770101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jul 12 12:07:22 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 12:07:22 2012] Using photon index=1.80, rate=0.0535, arf fullrun_mos2_xmm0086770101_pi300-10000_pass1_cl_src4.arf
[Thu Jul 12 12:07:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 12:07:22 2012] Updating source flux to 5.1e-13
[Thu Jul 12 12:11:02 2012] xmm0086770101/analysis//spectral/fullrun_mos2_xmm0086770101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete