[Thu Jul 12 03:34:10 2012] Detection parameters:
  Position = (327.3, 104.5) = 5 26 44.29 -70 14 36.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.5 +/- 9.6
  Background counts = 14.6
  Rate = 0.0009 +/- 0.0002

[Thu Jul 12 03:34:10 2012] Off-axis axis estimate = 14.22'
[Thu Jul 12 05:55:45 2012] Using EEF radius (= 13.54 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 05:55:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 12 05:55:45 2012] Initial guess for spatial extent in simple fitting = 13.54"
[Thu Jul 12 05:55:45 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.939
[Thu Jul 12 05:55:45 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 13.54"
[Thu Jul 12 06:30:57 2012] fullrun_mos2_xmm0086770101_pi300-10000_cl_pass0_src30.ximg exists
[Thu Jul 12 06:30:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086770101_pi300-10000_cl_pass0_src30.csv
[Thu Jul 12 06:30:57 2012] fullrun_mos2_xmm0086770101_pi300-10000_cl_pass0_src30_1.ximg exists
[Thu Jul 12 06:30:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086770101_pi300-10000_cl_pass0_src30.csv
[Thu Jul 12 06:30:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086770101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086770101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 06:30:58 2012] fullrun_mos2_xmm0086770101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Thu Jul 12 06:30:58 2012] fullrun_mos2_xmm0086770101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Thu Jul 12 06:30:58 2012] Fit fullrun_mos2_xmm0086770101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Thu Jul 12 06:31:19 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 15.502680 pixels away
[Thu Jul 12 06:31:19 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 06:31:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 06:31:19 2012] Assessing source extent using major
[Thu Jul 12 06:31:19 2012] Source does appear to be extended
[Thu Jul 12 06:31:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 08:43:50 2012] Using EEF radius (= 13.54 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 08:43:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 12 08:43:50 2012] Initial guess for spatial extent in simple fitting = 13.54"
[Thu Jul 12 08:43:50 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.939
[Thu Jul 12 08:43:50 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 13.54"
[Thu Jul 12 09:10:12 2012] fullrun_mos2_xmm0086770101_pi300-10000_cl_pass1_src28.ximg exists
[Thu Jul 12 09:10:12 2012] fullrun_mos2_xmm0086770101_pi300-10000_cl_pass1_src28_1.ximg exists
[Thu Jul 12 09:10:12 2012] Fit fullrun_mos2_xmm0086770101_pi300-10000_cl_pass1_src28 appears to have run properly
[Thu Jul 12 09:10:12 2012] fullrun_mos2_xmm0086770101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Thu Jul 12 09:10:12 2012] fullrun_mos2_xmm0086770101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Thu Jul 12 09:10:12 2012] Fit fullrun_mos2_xmm0086770101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Thu Jul 12 09:10:27 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 17.488823 pixels away
[Thu Jul 12 09:10:27 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 09:10:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 09:10:27 2012] Assessing source extent using major
[Thu Jul 12 09:10:27 2012] Source does appear to be extended
[Thu Jul 12 09:10:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 11:27:48 2012] XMMSAS src. selection expression = ellipse(28424.634216, 9042.757729, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 12 11:27:48 2012] Writing source region out to fullrun_mos2_xmm0086770101_pi300-10000_pass1_cl_src32_src.reg
[Thu Jul 12 11:27:48 2012] Extracting stamp from image fullrun_mos2_xmm0086770101_pi300-10000_cl_sm2.00.img.gz, (290, 67) - (365, 142)
[Thu Jul 12 11:27:48 2012] XMMSAS bgd. selection expression = annulus(28424.634216, 9042.757729, 1087.500000, 2175.000000, X, Y)
[Thu Jul 12 11:27:48 2012] Writing fullrun_mos2_xmm0086770101_pi300-10000_pass1_cl_src32.gif
[Thu Jul 12 11:37:15 2012] Mean detx,y = (-15861.07, -813.53) 
[Thu Jul 12 11:37:16 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 11:37:45 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 11:37:46 2012] Setting source spectrum file to fullrun_mos2_xmm0086770101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Thu Jul 12 11:37:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0086770101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Thu Jul 12 12:05:47 2012] Not generating rmf since there are only 39 counts
[Thu Jul 12 12:05:47 2012] rmf not generated due to insufficient counts
[Thu Jul 12 12:07:22 2012] Updating aperture counts using extracted products
[Thu Jul 12 12:07:22 2012] Error reading totcts from fullrun_mos2_xmm0086770101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Thu Jul 12 12:07:23 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 12:07:23 2012] Using photon index=1.80, rate=0.000851, arf fullrun_mos2_xmm0086770101_pi300-10000_pass1_cl_src32.arf
[Thu Jul 12 12:07:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 12:07:23 2012] Updating source flux to 2e-14
[Thu Jul 12 12:10:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting