[Sun Aug 26 16:53:00 2012] Detection parameters:
  Position = (266.0, 215.9) = 4 18 47.02 28 20 5.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5176.9 +/- 87.4
  Background counts = 54.6
  Rate = 0.2 +/- 0.003

[Sun Aug 26 16:53:01 2012] Off-axis axis estimate = 6.43'
[Sun Aug 26 18:41:11 2012] Using EEF radius (= 9.64 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 18:41:11 2012] Initial guess for spatial extent in simple fitting = 9.64"
[Sun Aug 26 18:41:11 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.219
[Sun Aug 26 18:41:11 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.64"
[Sun Aug 26 19:34:23 2012] fullrun_mos2_xmm0086360401_pi300-10000_cl_pass0_src3.ximg exists
[Sun Aug 26 19:34:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360401_pi300-10000_cl_pass0_src3.csv
[Sun Aug 26 19:34:23 2012] fullrun_mos2_xmm0086360401_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Aug 26 19:34:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360401_pi300-10000_cl_pass0_src3.csv
[Sun Aug 26 19:34:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086360401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086360401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 19:34:23 2012] fullrun_mos2_xmm0086360401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Aug 26 19:34:23 2012] fullrun_mos2_xmm0086360401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Aug 26 19:34:23 2012] Fit fullrun_mos2_xmm0086360401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Aug 26 19:34:35 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.395514 pixels away
[Sun Aug 26 19:34:35 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 19:34:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 19:34:35 2012] Assessing source extent using major
[Sun Aug 26 19:34:35 2012] Source does appear to be extended
[Sun Aug 26 19:34:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 20:59:06 2012] Using EEF radius (= 9.64 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 20:59:06 2012] Initial guess for spatial extent in simple fitting = 9.64"
[Sun Aug 26 20:59:06 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.219
[Sun Aug 26 20:59:06 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.64"
[Sun Aug 26 21:45:26 2012] fullrun_mos2_xmm0086360401_pi300-10000_cl_pass1_src3.ximg exists
[Sun Aug 26 21:45:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360401_pi300-10000_cl_pass1_src3.csv
[Sun Aug 26 21:45:26 2012] fullrun_mos2_xmm0086360401_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Aug 26 21:45:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360401_pi300-10000_cl_pass1_src3.csv
[Sun Aug 26 21:45:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086360401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086360401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 21:45:27 2012] fullrun_mos2_xmm0086360401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Aug 26 21:45:27 2012] fullrun_mos2_xmm0086360401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Aug 26 21:45:27 2012] Fit fullrun_mos2_xmm0086360401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Aug 26 21:45:38 2012] Spatial fit model total counts = 4140.340000, observed total counts = 4138.000000
[Sun Aug 26 21:45:38 2012] Offset between fit and detection position for source 3 = 0.135703 pixels
[Sun Aug 26 21:45:38 2012] 4141.434000 total counts/ 999.204000 bgd. counts: snr = 99.405609
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.135703 pixels
  Position = (266.1, 215.8) = 4 18 46.98 28 20 5.2
  Extent = 5.9 (5.7-6.1)", rotation angle = 0
  Source counts = 3142.2 +/- 64.4
  Background counts = 999.2
  Rate = 0.09 +/- 0.002
[Sun Aug 26 21:45:38 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 21:45:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 21:45:38 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 21:45:38 2012] Source does appear to be extended
[Sun Aug 26 21:45:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 22:30:07 2012] Counts = 3142.230000, rescaling region sizes by 2.000000
[Sun Aug 26 22:30:07 2012] XMMSAS src. selection expression = ellipse(23099.466100, 18725.420800, 706.526420, 706.526420, 0.000000, X, Y)
[Sun Aug 26 22:30:07 2012] Writing source region out to fullrun_mos2_xmm0086360401_pi300-10000_pass1_cl_src3_src.reg
[Sun Aug 26 22:30:07 2012] Extracting stamp from image fullrun_mos2_xmm0086360401_pi300-10000_cl_sm2.00.img.gz, (225, 175) - (307, 256)
[Sun Aug 26 22:30:07 2012] XMMSAS bgd. selection expression = annulus(23099.466100, 18725.420800, 2355.088068, 4710.176136, X, Y) && !ellipse(24777.521600, 17681.138800, 453.016013, 453.016013, 0.000000, X, Y) && !ellipse(24273.684418, 17173.204163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27170.985800, 14959.488000, 428.373612, 428.373612, 0.000000, X, Y) && !ellipse(19169.559189, 21531.884781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27291.645599, 14386.946060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19362.473360, 18227.050800, 482.190099, 482.190099, 0.000000, X, Y)
[Sun Aug 26 22:30:07 2012] Writing fullrun_mos2_xmm0086360401_pi300-10000_pass1_cl_src3.gif
[Sun Aug 26 22:31:23 2012] Mean detx,y = (2627.52, -9211.69) 
[Sun Aug 26 22:31:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 22:32:15 2012] grppha failed
[Sun Aug 26 22:32:15 2012] Setting source spectrum file to fullrun_mos2_xmm0086360401_pi300-10000_pass1_cl_src3_src.pi.gz
[Sun Aug 26 22:32:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0086360401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Aug 26 22:39:08 2012] Updating aperture counts using extracted products
[Sun Aug 26 22:39:08 2012] Error reading totcts from fullrun_mos2_xmm0086360401_pi300-10000_pass1_cl_src3_src.pi.gz
[Sun Aug 26 22:39:08 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 22:39:10 2012] Source 3 has no response, skipping
[Sun Aug 26 22:39:11 2012] xmm0086360401/analysis//spectral/fullrun_mos2_xmm0086360401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete