[Sun Aug 26 16:53:01 2012] Detection parameters:
  Position = (314.3, 165.9) = 4 18 31.11 28 16 27.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.1 +/- 16.3
  Background counts = 48.5
  Rate = 0.005 +/- 0.0007

[Sun Aug 26 16:53:01 2012] Off-axis axis estimate = 9.68'
[Sun Aug 26 18:41:11 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 18:41:11 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Sun Aug 26 18:41:11 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.943
[Sun Aug 26 18:41:11 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 11.27"
[Sun Aug 26 19:34:23 2012] fullrun_mos2_xmm0086360401_pi300-10000_cl_pass0_src15.ximg exists
[Sun Aug 26 19:34:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360401_pi300-10000_cl_pass0_src15.csv
[Sun Aug 26 19:34:23 2012] fullrun_mos2_xmm0086360401_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Aug 26 19:34:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360401_pi300-10000_cl_pass0_src15.csv
[Sun Aug 26 19:34:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086360401_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086360401_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 19:34:23 2012] fullrun_mos2_xmm0086360401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Aug 26 19:34:23 2012] fullrun_mos2_xmm0086360401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Aug 26 19:34:23 2012] Fit fullrun_mos2_xmm0086360401_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Aug 26 19:34:35 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 15.260279 pixels away
[Sun Aug 26 19:34:35 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 19:34:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 19:34:35 2012] Assessing source extent using major
[Sun Aug 26 19:34:35 2012] Source does appear to be extended
[Sun Aug 26 19:34:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 19:34:35 2012] Source is confused with source 14
[Sun Aug 26 20:59:06 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 20:59:06 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Sun Aug 26 20:59:06 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.943
[Sun Aug 26 20:59:06 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 11.27"
[Sun Aug 26 21:45:26 2012] fullrun_mos2_xmm0086360401_pi300-10000_cl_pass1_src15.ximg exists
[Sun Aug 26 21:45:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360401_pi300-10000_cl_pass1_src15.csv
[Sun Aug 26 21:45:26 2012] fullrun_mos2_xmm0086360401_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Aug 26 21:45:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0086360401_pi300-10000_cl_pass1_src15.csv
[Sun Aug 26 21:45:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0086360401_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0086360401_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 21:45:27 2012] fullrun_mos2_xmm0086360401_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Aug 26 21:45:27 2012] fullrun_mos2_xmm0086360401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Aug 26 21:45:27 2012] Fit fullrun_mos2_xmm0086360401_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Aug 26 21:45:38 2012] Source 20 is offset by -3.161384 and -1.659402 pixels which is larger than
2 X fitted extent = 0.676993 x 0.676993, not incorporating fit results
[Sun Aug 26 21:45:38 2012] Warning, spatial fit 15 centroid is now closest to src. 14
[Sun Aug 26 21:45:38 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 21:45:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 21:45:38 2012] Assessing source extent using major
[Sun Aug 26 21:45:38 2012] Source does appear to be extended
[Sun Aug 26 21:45:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 22:30:07 2012] XMMSAS src. selection expression = ellipse(27291.645599, 14386.946060, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 26 22:30:07 2012] Writing source region out to fullrun_mos2_xmm0086360401_pi300-10000_pass1_cl_src20_src.reg
[Sun Aug 26 22:30:07 2012] Extracting stamp from image fullrun_mos2_xmm0086360401_pi300-10000_cl_sm2.00.img.gz, (277, 128) - (352, 203)
[Sun Aug 26 22:30:07 2012] XMMSAS bgd. selection expression = annulus(27291.645599, 14386.946060, 1087.500000, 2175.000000, X, Y) && !ellipse(24273.684418, 17173.204163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27170.985800, 14959.488000, 428.373612, 428.373612, 0.000000, X, Y)
[Sun Aug 26 22:30:07 2012] Writing fullrun_mos2_xmm0086360401_pi300-10000_pass1_cl_src20.gif
[Sun Aug 26 22:36:53 2012] Mean detx,y = (-2222.56, -12486.52) 
[Sun Aug 26 22:36:54 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 22:37:03 2012] grppha failed
[Sun Aug 26 22:37:03 2012] Setting source spectrum file to fullrun_mos2_xmm0086360401_pi300-10000_pass1_cl_src20_src.pi.gz
[Sun Aug 26 22:37:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0086360401_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sun Aug 26 22:38:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Aug 26 22:38:11 2012] rmf not generated due to insufficient counts
[Sun Aug 26 22:39:08 2012] Updating aperture counts using extracted products
[Sun Aug 26 22:39:08 2012] Error reading totcts from fullrun_mos2_xmm0086360401_pi300-10000_pass1_cl_src20_src.pi.gz
[Sun Aug 26 22:39:08 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 22:39:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Aug 26 22:39:11 2012] xmm0086360401/analysis//spectral/fullrun_mos2_xmm0086360401_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete