[Sun Aug 26 16:52:42 2012] Detection parameters:
  Position = (279.7, 198.1) = 4 18 42.49 28 18 48.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2185.5 +/- 57.6
  Background counts = 49.8
  Rate = 0.09 +/- 0.002

[Sun Aug 26 16:52:42 2012] Off-axis axis estimate = 7.40'
[Sun Aug 26 17:55:54 2012] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 17:55:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 26 17:55:54 2012] Initial guess for spatial extent in simple fitting = 10.13"
[Sun Aug 26 17:55:54 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.125
[Sun Aug 26 17:55:54 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.13"
[Sun Aug 26 18:41:10 2012] fullrun_mos1_xmm0086360401_pi300-10000_cl_pass0_src4.ximg exists
[Sun Aug 26 18:41:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086360401_pi300-10000_cl_pass0_src4.csv
[Sun Aug 26 18:41:10 2012] fullrun_mos1_xmm0086360401_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Aug 26 18:41:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086360401_pi300-10000_cl_pass0_src4.csv
[Sun Aug 26 18:41:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0086360401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0086360401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 18:41:10 2012] fullrun_mos1_xmm0086360401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Aug 26 18:41:10 2012] fullrun_mos1_xmm0086360401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Aug 26 18:41:10 2012] Fit fullrun_mos1_xmm0086360401_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Aug 26 19:34:32 2012] Source 4 is offset by -5.597887 and -5.945906 pixels which is larger than
2 X fitted extent = 2.044395 x 2.044395, not incorporating fit results
[Sun Aug 26 19:34:32 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 19:34:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 19:34:32 2012] Assessing source extent using major
[Sun Aug 26 19:34:32 2012] Source does appear to be extended
[Sun Aug 26 19:34:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 20:07:10 2012] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 20:07:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 26 20:07:10 2012] Initial guess for spatial extent in simple fitting = 10.13"
[Sun Aug 26 20:07:10 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.125
[Sun Aug 26 20:07:10 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 10.13"
[Sun Aug 26 20:59:06 2012] fullrun_mos1_xmm0086360401_pi300-10000_cl_pass1_src4.ximg exists
[Sun Aug 26 20:59:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086360401_pi300-10000_cl_pass1_src4.csv
[Sun Aug 26 20:59:06 2012] fullrun_mos1_xmm0086360401_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Aug 26 20:59:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0086360401_pi300-10000_cl_pass1_src4.csv
[Sun Aug 26 20:59:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0086360401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0086360401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 20:59:06 2012] fullrun_mos1_xmm0086360401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Aug 26 20:59:06 2012] fullrun_mos1_xmm0086360401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Aug 26 20:59:06 2012] Fit fullrun_mos1_xmm0086360401_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Aug 26 21:45:35 2012] Warning, spatial fit 4 centroid is now closest to src. 1
[Sun Aug 26 21:45:35 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 71.133074 pixels away
[Sun Aug 26 21:45:35 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 54.080483 pixels away
[Sun Aug 26 21:45:35 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 21:45:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 21:45:35 2012] Assessing source extent using major
[Sun Aug 26 21:45:35 2012] Source does appear to be extended
[Sun Aug 26 21:45:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 22:21:15 2012] Counts = 2185.505615, rescaling region sizes by 2.000000
[Sun Aug 26 22:21:15 2012] XMMSAS src. selection expression = ellipse(24285.825867, 17184.602203, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Aug 26 22:21:15 2012] Writing source region out to fullrun_mos1_xmm0086360401_pi300-10000_pass1_cl_src4_src.reg
[Sun Aug 26 22:21:15 2012] Extracting stamp from image fullrun_mos1_xmm0086360401_pi300-10000_cl_sm2.00.img.gz, (205, 123) - (355, 273)
[Sun Aug 26 22:21:15 2012] XMMSAS bgd. selection expression = annulus(24285.825867, 17184.602203, 4350.000000, 8700.000000, X, Y) && !ellipse(24786.216000, 17706.038000, 436.883213, 436.883213, 0.000000, X, Y) && !ellipse(23110.111220, 18717.172400, 442.706413, 442.706413, 0.000000, X, Y) && !ellipse(19122.600200, 21670.802200, 533.095215, 533.095215, 0.000000, X, Y) && !ellipse(27828.809000, 26185.358800, 421.705612, 351.758410, 0.000000, X, Y) && !ellipse(27152.554800, 14978.851200, 378.972811, 378.972811, 0.000000, X, Y) && !ellipse(24867.995400, 23892.635400, 419.899212, 419.899212, 0.000000, X, Y) && !ellipse(33395.830600, 25857.602000, 413.070412, 413.070412, 0.000000, X, Y) && !ellipse(19369.065460, 18188.424400, 300.867209, 300.867209, 0.000000, X, Y) && !ellipse(27321.216000, 14384.148600, 292.843208, 292.843208, 0.000000, X, Y)
[Sun Aug 26 22:21:15 2012] Writing fullrun_mos1_xmm0086360401_pi300-10000_pass1_cl_src4.gif
[Sun Aug 26 22:23:10 2012] Mean detx,y = (-9825.81, -1125.94) 
[Sun Aug 26 22:23:11 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 22:26:05 2012] grppha failed
[Sun Aug 26 22:26:05 2012] Setting source spectrum file to fullrun_mos1_xmm0086360401_pi300-10000_pass1_cl_src4_src.pi.gz
[Sun Aug 26 22:26:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0086360401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Aug 26 22:30:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Aug 26 22:30:05 2012] rmf not generated due to insufficient counts
[Sun Aug 26 22:39:08 2012] Updating aperture counts using extracted products
[Sun Aug 26 22:39:08 2012] Error reading totcts from fullrun_mos1_xmm0086360401_pi300-10000_pass1_cl_src4_src.pi.gz
[Sun Aug 26 22:39:08 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 22:39:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Aug 26 22:39:10 2012] xmm0086360401/analysis//spectral/fullrun_mos1_xmm0086360401_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete