[Fri May 24 13:43:02 2013] Detection parameters: Position = (285.3, 316.0) = 4 18 40.99 28 27 24.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 154.8 +/- 19.8 Background counts = 188.2 Rate = 0.003 +/- 0.0004 [Fri May 24 13:43:03 2013] Off-axis axis estimate = 1.59' [Fri May 24 13:48:18 2013] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting [Fri May 24 13:48:18 2013] Initial guess for spatial extent in simple fitting = 7.22" [Fri May 24 13:48:18 2013] source mask rpix=1.7, npix_max = 18, mask sum = 12, frac = 0.643 [Fri May 24 13:48:18 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 7.22" [Fri May 24 15:20:22 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_src24.ximg exists [Fri May 24 15:20:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_src24.csv [Fri May 24 15:20:22 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_src24_1.ximg exists [Fri May 24 15:20:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_src24.csv [Fri May 24 15:20:22 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_src24_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 24 15:20:22 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src24.ximg exists [Fri May 24 15:20:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src24.csv [Fri May 24 15:20:22 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists [Fri May 24 15:20:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src24.csv [Fri May 24 15:20:22 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 24 17:42:18 2013] Source 24 is offset by -3.082699 and -5.487351 pixels which is larger than 2 X fitted extent = 0.901968 x 0.901968, not incorporating fit results [Fri May 24 17:42:18 2013] Source 24 is offset by -3.466354 and 0.759017 pixels which is larger than 2 X fitted extent = 0.788331 x 0.788331, not incorporating fit results [Fri May 24 17:42:18 2013] Vigneting correction estimate = 1.000000 [Fri May 24 17:42:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 24 17:42:18 2013] Assessing source extent using major [Fri May 24 17:42:18 2013] Source does appear to be extended [Fri May 24 17:42:18 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 24 17:42:39 2013] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting [Fri May 24 17:42:39 2013] Initial guess for spatial extent in simple fitting = 7.22" [Fri May 24 17:42:39 2013] source mask rpix=1.7, npix_max = 18, mask sum = 12, frac = 0.643 [Fri May 24 17:42:39 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 7.22" [Fri May 24 19:07:59 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_src24.ximg exists [Fri May 24 19:07:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_src24.csv [Fri May 24 19:07:59 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_src24_1.ximg exists [Fri May 24 19:07:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_src24.csv [Fri May 24 19:07:59 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_src24_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 24 19:08:00 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src24.ximg exists [Fri May 24 19:08:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src24.csv [Fri May 24 19:08:00 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists [Fri May 24 19:08:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src24.csv [Fri May 24 19:08:00 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 24 21:30:18 2013] Spatial fit model total counts = 1021.340000, observed total counts = 770.000000 [Fri May 24 21:30:18 2013] Poor agreement between spatial fit and data for source 24 It may help to tweak spatial fit manually Not incorporating fit results [Fri May 24 21:30:18 2013] Vigneting correction estimate = 1.000000 [Fri May 24 21:30:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 24 21:30:18 2013] Assessing source extent using major [Fri May 24 21:30:18 2013] Source does appear to be extended [Fri May 24 21:30:18 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 24 21:30:43 2013] XMMSAS src. selection expression = ellipse(24776.037201, 27445.066467, 652.500000, 652.500000, 0.000000, X, Y) [Fri May 24 21:30:43 2013] Writing source region out to fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src24_src.reg [Fri May 24 21:30:43 2013] Extracting stamp from image fullrun_pn_xmm0086360301_pi300-10000_cl_sm2.00.img.gz, (248, 279) - (323, 354) [Fri May 24 21:30:43 2013] XMMSAS bgd. selection expression = annulus(24776.037201, 27445.066467, 1087.500000, 2175.000000, X, Y) && !ellipse(27396.767200, 27251.761140, 1426.317641, 1399.804840, 60.477200, X, Y) && !ellipse(23956.172119, 30206.153564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27437.743896, 28620.410767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27220.940000, 25688.182000, 1118.024032, 470.872814, 113.036600, X, Y) && !ellipse(26832.146000, 24960.574000, 1588.896046, 1588.896046, 0.000000, X, Y) && !ellipse(26854.578000, 24174.568600, 1518.096044, 348.340810, 104.395600, X, Y) [Fri May 24 21:30:43 2013] Writing fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src24.gif [Fri May 24 22:18:12 2013] Mean detx,y = (-2534.40, 164.67) [Fri May 24 22:18:17 2013] Setting backscal keywords in source and bgd. spectrum [Fri May 24 22:18:52 2013] Binned source spectrum to 10 counts/bin [Fri May 24 22:18:53 2013] Setting source spectrum file to fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src24_src_b10.pi.gz [Fri May 24 22:18:53 2013] Setting bgd. spectrum file to fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src24_bgd.pi.gz [Fri May 24 23:43:46 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Fri May 24 23:43:46 2013] rmf not generated due to insufficient counts [Sat May 25 02:32:02 2013] Updating aperture counts using extracted products [Sat May 25 02:32:03 2013] Total counts from fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 547.00 [Sat May 25 02:32:03 2013] Total counts from fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src24_bgd.pi.gz = 2841.00 [Sat May 25 02:32:03 2013] Got source and background scale factors 1001110.000000, 6491327.000000 [Sat May 25 02:32:03 2013] User source parameters: Position = (285.3, 316.0) = 4 18 40.99 28 27 24.6 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 108.9 +/- 24.4 Background aperture counts = 438.1 Rate = 0.002 +/- 0.0005 [Sat May 25 02:32:03 2013] Updating counts from extracted products [Sat May 25 02:32:03 2013] Set source signif. to 108.85/20.93 = 5.20 [Sat May 25 02:32:11 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 25 02:32:11 2013] Using photon index=1.80, rate=0.00224, arf fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src24.arf [Sat May 25 02:32:11 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 25 02:32:11 2013] Updating source flux to 9.6e-15 [Sat May 25 02:32:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat May 25 02:33:15 2013] xmm0086360301/analysis//spectral/fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete