[Fri May 24 13:43:02 2013] Detection parameters:
  Position = (315.9, 329.5) = 4 18 30.90 28 27 58.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1278.5 +/- 490.3
  Background counts = 189.7
  Rate = 0.03 +/- 0.01

[Fri May 24 13:43:03 2013] Off-axis axis estimate = 2.59'
[Fri May 24 13:48:18 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Fri May 24 13:48:18 2013] Initial guess for spatial extent in simple fitting = 7.72"
[Fri May 24 13:48:18 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.773
[Fri May 24 13:48:18 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 7.72"
[Fri May 24 15:20:22 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_src11.ximg exists
[Fri May 24 15:20:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_src11.csv
[Fri May 24 15:20:22 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri May 24 15:20:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_src11.csv
[Fri May 24 15:20:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 15:20:22 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri May 24 15:20:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri May 24 15:20:22 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri May 24 15:20:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri May 24 15:20:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 17:42:18 2013] Spatial fit model total counts = 2161.780000, observed total counts = 1498.000000
[Fri May 24 17:42:18 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 17:42:18 2013] Vigneting correction estimate = 1.000000
[Fri May 24 17:42:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 17:42:18 2013] Assessing source extent using major
[Fri May 24 17:42:18 2013] Source does appear to be extended
[Fri May 24 17:42:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 17:42:39 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Fri May 24 17:42:39 2013] Initial guess for spatial extent in simple fitting = 7.72"
[Fri May 24 17:42:39 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.773
[Fri May 24 17:42:39 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 7.72"
[Fri May 24 19:07:59 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_src11.ximg exists
[Fri May 24 19:07:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_src11.csv
[Fri May 24 19:07:59 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri May 24 19:07:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_src11.csv
[Fri May 24 19:07:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 19:08:00 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri May 24 19:08:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri May 24 19:08:00 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri May 24 19:08:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri May 24 19:08:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:30:18 2013] Source 11 is offset by -1.347946 and -7.572819 pixels which is larger than
2 X fitted extent = 7.100552 x 2.905733, not incorporating fit results
[Fri May 24 21:30:18 2013] Vigneting correction estimate = 1.000000
[Fri May 24 21:30:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 21:30:18 2013] Assessing source extent using major
[Fri May 24 21:30:18 2013] Source does appear to be extended
[Fri May 24 21:30:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 21:30:43 2013] Counts = 1278.508911, rescaling region sizes by 2.000000
[Fri May 24 21:30:43 2013] XMMSAS src. selection expression = ellipse(27437.743896, 28620.410767, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri May 24 21:30:43 2013] Writing source region out to fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src11_src.reg
[Fri May 24 21:30:43 2013] Extracting stamp from image fullrun_pn_xmm0086360301_pi300-10000_cl_sm2.00.img.gz, (241, 255) - (391, 405)
[Fri May 24 21:30:43 2013] XMMSAS bgd. selection expression = annulus(27437.743896, 28620.410767, 4350.000000, 8700.000000, X, Y) && !ellipse(23188.385437, 18674.582077, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27396.767200, 27251.761140, 1426.317641, 1399.804840, 60.477200, X, Y) && !ellipse(26531.295654, 31116.273712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23956.172119, 30206.153564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33528.986450, 25793.619659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27927.060600, 26104.449400, 419.895212, 372.231211, 63.688600, X, Y) && !ellipse(24990.133453, 23806.877167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19247.427080, 21608.857000, 483.268814, 372.011211, 59.993676, X, Y) && !ellipse(24663.094910, 36553.603790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25637.028687, 36344.852112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27162.413200, 32006.685400, 409.888012, 409.888012, 0.000000, X, Y) && !ellipse(24776.037201, 27445.066467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27220.940000, 25688.182000, 1118.024032, 470.872814, 113.036600, X, Y) && !ellipse(26832.146000, 24960.574000, 1588.896046, 1588.896046, 0.000000, X, Y) && !ellipse(26854.578000, 24174.568600, 1518.096044, 348.340810, 104.395600, X, Y) && !ellipse(26698.887200, 23249.530560, 1542.320044, 331.196810, 99.842350, X, Y) && !ellipse(26530.191800, 22316.152000, 1261.736036, 439.012813, 90.000000, X, Y) && !ellipse(26351.869600, 21477.376600, 1759.440051, 439.461613, 101.789300, X, Y) && !ellipse(26321.605600, 21350.018000, 1350.816039, 408.620812, 101.607800, X, Y) && !ellipse(26109.050200, 20052.069400, 1419.552041, 388.012011, 102.150100, X, Y) && !ellipse(25939.861600, 19205.827400, 1477.040043, 372.948011, 101.939400, X, Y) && !ellipse(25968.532800, 19358.518000, 1849.984053, 375.622411, 101.361700, X, Y)
[Fri May 24 21:30:43 2013] Writing fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src11.gif
[Fri May 24 21:59:06 2013] Mean detx,y = (78.09, -464.49) 
[Fri May 24 21:59:15 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 24 22:01:57 2013] Binned source spectrum to 10 counts/bin
[Fri May 24 22:01:57 2013] Setting source spectrum file to fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri May 24 22:01:57 2013] Setting bgd. spectrum file to fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri May 24 22:53:29 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 24 22:53:29 2013] rmf not generated due to insufficient counts
[Sat May 25 02:31:58 2013] Updating aperture counts using extracted products
[Sat May 25 02:31:58 2013] Total counts from fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 21247.00
[Sat May 25 02:31:58 2013] Total counts from fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src11_bgd.pi.gz = 48426.00
[Sat May 25 02:31:58 2013] Got source and background scale factors 4418521.000000, 143436329.000000
[Sat May 25 02:31:58 2013] User source parameters:
  Position = (315.9, 329.5) = 4 18 30.90 28 27 58.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 19755.2 +/- 146.8
  Background aperture counts = 1491.8
  Rate = 0.4 +/- 0.003

[Sat May 25 02:31:58 2013] Updating counts from extracted products
[Sat May 25 02:31:58 2013] Set source signif. to 19755.25/38.62 = 511.49
[Sat May 25 02:32:10 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 02:32:10 2013] Using photon index=1.80, rate=0.406, arf fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src11.arf
[Sat May 25 02:32:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 02:32:10 2013] Updating source flux to 1.3e-12
[Sat May 25 02:32:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 02:33:15 2013] xmm0086360301/analysis//spectral/fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete