[Fri May 24 13:43:02 2013] Detection parameters:
  Position = (189.9, 344.5) = 4 19 12.49 28 29 41.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 212.7 +/- 30.3
  Background counts = 166.8
  Rate = 0.003 +/- 0.0004

[Fri May 24 13:43:03 2013] Off-axis axis estimate = 8.55'
[Fri May 24 13:48:18 2013] Using EEF radius (= 10.70 ")to estimate initial spatial extent for simple fitting
[Fri May 24 13:48:18 2013] Initial guess for spatial extent in simple fitting = 10.70"
[Fri May 24 13:48:18 2013] source mask rpix=2.5, npix_max = 35, mask sum = 27, frac = 0.770
[Fri May 24 13:48:18 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 10.70"
[Fri May 24 15:20:22 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_src10.ximg exists
[Fri May 24 15:20:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_src10.csv
[Fri May 24 15:20:22 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri May 24 15:20:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_src10.csv
[Fri May 24 15:20:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 15:20:22 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri May 24 15:20:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri May 24 15:20:22 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri May 24 15:20:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri May 24 15:20:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0086360301_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 17:42:18 2013] Spatial fit model total counts = 638.366000, observed total counts = 550.000000
[Fri May 24 17:42:18 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 17:42:18 2013] Vigneting correction estimate = 1.000000
[Fri May 24 17:42:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 17:42:18 2013] Assessing source extent using major
[Fri May 24 17:42:18 2013] Source does appear to be extended
[Fri May 24 17:42:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 17:42:39 2013] Using EEF radius (= 10.70 ")to estimate initial spatial extent for simple fitting
[Fri May 24 17:42:39 2013] Initial guess for spatial extent in simple fitting = 10.70"
[Fri May 24 17:42:39 2013] source mask rpix=2.5, npix_max = 35, mask sum = 27, frac = 0.770
[Fri May 24 17:42:39 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 10.70"
[Fri May 24 19:07:59 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_src10.ximg exists
[Fri May 24 19:07:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_src10.csv
[Fri May 24 19:07:59 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri May 24 19:07:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_src10.csv
[Fri May 24 19:07:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 19:08:00 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri May 24 19:08:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri May 24 19:08:00 2013] fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri May 24 19:08:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri May 24 19:08:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0086360301_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 21:30:18 2013] Source 10 is offset by -1.743280 and 9.238162 pixels which is larger than
2 X fitted extent = 5.865150 x 1.557614, not incorporating fit results
[Fri May 24 21:30:18 2013] Vigneting correction estimate = 1.000000
[Fri May 24 21:30:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 21:30:18 2013] Assessing source extent using major
[Fri May 24 21:30:18 2013] Source does appear to be extended
[Fri May 24 21:30:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 21:30:43 2013] XMMSAS src. selection expression = ellipse(16469.946640, 29923.430115, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 24 21:30:43 2013] Writing source region out to fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src10_src.reg
[Fri May 24 21:30:43 2013] Extracting stamp from image fullrun_pn_xmm0086360301_pi300-10000_cl_sm2.00.img.gz, (152, 307) - (227, 382)
[Fri May 24 21:30:43 2013] XMMSAS bgd. selection expression = annulus(16469.946640, 29923.430115, 1087.500000, 2175.000000, X, Y) && !ellipse(18237.964840, 27823.432600, 492.557614, 349.592010, 93.069353, X, Y)
[Fri May 24 21:30:43 2013] Writing fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src10.gif
[Fri May 24 21:57:55 2013] Mean detx,y = (-11072.49, -752.72) 
[Fri May 24 21:58:01 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 24 21:58:33 2013] Binned source spectrum to 10 counts/bin
[Fri May 24 21:58:33 2013] Setting source spectrum file to fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri May 24 21:58:33 2013] Setting bgd. spectrum file to fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri May 24 22:53:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 24 22:53:07 2013] rmf not generated due to insufficient counts
[Sat May 25 02:31:57 2013] Updating aperture counts using extracted products
[Sat May 25 02:31:57 2013] Total counts from fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 398.00
[Sat May 25 02:31:57 2013] Total counts from fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src10_bgd.pi.gz = 3284.00
[Sat May 25 02:31:58 2013] Got source and background scale factors 1029021.000000, 10028194.000000
[Sat May 25 02:31:58 2013] User source parameters:
  Position = (189.9, 344.5) = 4 19 12.49 28 29 41.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 61.0 +/- 21.0
  Background aperture counts = 337.0
  Rate = 0.001 +/- 0.0004

[Sat May 25 02:31:58 2013] Updating counts from extracted products
[Sat May 25 02:31:58 2013] Set source signif. to 61.02/18.36 = 3.32
[Sat May 25 02:32:10 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 02:32:10 2013] Using photon index=1.80, rate=0.00126, arf fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src10.arf
[Sat May 25 02:32:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 25 02:32:10 2013] Updating source flux to 1e-14
[Sat May 25 02:32:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 25 02:33:15 2013] xmm0086360301/analysis//spectral/fullrun_pn_xmm0086360301_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete